commit 227ab209e9be6821bfb3360c4111dbed1598715c Author: Greg Kroah-Hartman Date: Fri May 31 06:45:24 2019 -0700 Linux 5.0.20 commit 8a5cad2423894aaeb0980962fcbcfd2e0eaf4b32 Author: Benjamin Coddington Date: Thu May 9 07:25:21 2019 -0400 NFS: Fix a double unlock from nfs_match,get_client [ Upstream commit c260121a97a3e4df6536edbc2f26e166eff370ce ] Now that nfs_match_client drops the nfs_client_lock, we should be careful to always return it in the same condition: locked. Fixes: 950a578c6128 ("NFS: make nfs_match_client killable") Reported-by: syzbot+228a82b263b5da91883d@syzkaller.appspotmail.com Signed-off-by: Benjamin Coddington Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin commit 65784eba8a52bbeb8522487dd202ab8f6354173c Author: Maxime Ripard Date: Mon Feb 11 15:41:24 2019 +0100 drm/sun4i: dsi: Enforce boundaries on the start delay [ Upstream commit efa31801203ac2f5c6a82a28cb991c7163ee0f1d ] The Allwinner BSP makes sure that we don't end up with a null start delay or with a delay larger than vtotal. The former condition is likely to happen now with the reworked start delay, so make sure we enforce the same boundaries. Signed-off-by: Maxime Ripard Reviewed-by: Paul Kocialkowski Link: https://patchwork.freedesktop.org/patch/msgid/c9889cf5f7a3d101ef380905900b45a182596f56.1549896081.git-series.maxime.ripard@bootlin.com Signed-off-by: Sasha Levin commit de56a5e33754f0f6f670eac06903faae062919bd Author: Brett Creeley Date: Wed Feb 13 10:51:14 2019 -0800 ice: Put __ICE_PREPARED_FOR_RESET check in ice_prepare_for_reset [ Upstream commit 5abac9d7e1bb9a373673811154774d4c89a7f85e ] Currently we check if the __ICE_PREPARED_FOR_RESET bit is set prior to calling ice_prepare_for_reset in ice_reset_subtask(), but we aren't checking that bit in ice_do_reset() before calling ice_prepare_for_reset(). This is not consistent and can cause issues if ice_prepare_for_reset() is called prior to ice_do_reset(). Fix this by checking if the __ICE_PREPARED_FOR_RESET bit is set internal to ice_prepare_for_reset(). Signed-off-by: Brett Creeley Signed-off-by: Anirudh Venkataramanan Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin commit 48c7d1ea6d21361cabd42dbed7e6474e3f4d519f Author: Farhan Ali Date: Tue Apr 16 17:23:14 2019 -0400 vfio-ccw: Prevent quiesce function going into an infinite loop [ Upstream commit d1ffa760d22aa1d8190478e5ef555c59a771db27 ] The quiesce function calls cio_cancel_halt_clear() and if we get an -EBUSY we go into a loop where we: - wait for any interrupts - flush all I/O in the workqueue - retry cio_cancel_halt_clear During the period where we are waiting for interrupts or flushing all I/O, the channel subsystem could have completed a halt/clear action and turned off the corresponding activity control bits in the subchannel status word. This means the next time we call cio_cancel_halt_clear(), we will again start by calling cancel subchannel and so we can be stuck between calling cancel and halt forever. Rather than calling cio_cancel_halt_clear() immediately after waiting, let's try to disable the subchannel. If we succeed in disabling the subchannel then we know nothing else can happen with the device. Suggested-by: Eric Farman Signed-off-by: Farhan Ali Message-Id: <4d5a4b98ab1b41ac6131b5c36de18b76c5d66898.1555449329.git.alifm@linux.ibm.com> Reviewed-by: Eric Farman Acked-by: Halil Pasic Signed-off-by: Cornelia Huck Signed-off-by: Sasha Levin commit eb42f17258282986e47af5796f8b6ea8093cdabb Author: Maxime Ripard Date: Mon Feb 11 15:41:23 2019 +0100 drm/sun4i: dsi: Change the start delay calculation [ Upstream commit da676c6aa6413d59ab0a80c97bbc273025e640b2 ] The current calculation for the video start delay in the current DSI driver is that it is the total vertical size, minus the front porch and sync length, plus 1. This equals to the active vertical size plus the back porch plus 1. That 1 is coming in the Allwinner BSP from an variable that is set to 1. However, if we look at the Allwinner BSP more closely, and especially in the "legacy" code for the display (in drivers/video/sunxi/legacy/), we can see that this variable is actually computed from the porches and the sync minus 10, clamped between 8 and 100. This fixes the start delay symptom we've seen on some panels (vblank timeouts with vertical white stripes at the bottom of the panel). Reviewed-by: Paul Kocialkowski Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/6e5f72e68f47ca0223877464bf12f0c3f3978de8.1549896081.git-series.maxime.ripard@bootlin.com Signed-off-by: Sasha Levin commit d5b0f9cb6affcb00750662564445c4741a934fba Author: Chris Wilson Date: Fri Aug 4 09:23:28 2017 +0100 drm: Wake up next in drm_read() chain if we are forced to putback the event [ Upstream commit 60b801999c48b6c1dd04e653a38e2e613664264e ] After an event is sent, we try to copy it into the user buffer of the first waiter in drm_read() and if the user buffer doesn't have enough room we put it back onto the list. However, we didn't wake up any subsequent waiter, so that event may sit on the list until either a new vblank event is sent or a new waiter appears. Rare, but in the worst case may lead to a stuck process. Testcase: igt/drm_read/short-buffer-wakeup Signed-off-by: Chris Wilson Cc: Daniel Vetter Reviewed-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20170804082328.17173-1-chris@chris-wilson.co.uk Signed-off-by: Sasha Levin commit 75cd835d69ac31c47861b08aa8cc89b6b2531a60 Author: Noralf Trønnes Date: Mon Feb 25 15:42:26 2019 +0100 drm/drv: Hold ref on parent device during drm_device lifetime [ Upstream commit 56be6503aab2bc3a30beae408071b9be5e1bae51 ] This makes it safe to access drm_device->dev after the parent device has been removed/unplugged. Signed-off-by: Noralf Trønnes Reviewed-by: Gerd Hoffmann Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-2-noralf@tronnes.org Signed-off-by: Sasha Levin commit 12948cbc0fd72ea07fd1c5f2e73301596028aa14 Author: Eric Anholt Date: Fri Mar 8 09:43:35 2019 -0800 drm/v3d: Handle errors from IRQ setup. [ Upstream commit fc22771547e7e8a63679f0218e943d72b107de65 ] Noted in review by Dave Emett for V3D 4.2 support. Signed-off-by: Eric Anholt Link: https://patchwork.freedesktop.org/patch/msgid/20190308174336.7866-1-eric@anholt.net Reviewed-by: Dave Emett Signed-off-by: Sasha Levin commit 1576011d31310263e97d83fc240756ead871c7ab Author: Arnd Bergmann Date: Mon Mar 4 21:30:50 2019 +0100 ASoC: ti: fix davinci_mcasp_probe dependencies [ Upstream commit 7d7b25d05ef1c5a1a9320190e1eeb55534847558 ] The SND_SOC_DAVINCI_MCASP driver can use either edma or sdma as a back-end, and it takes the presence of the respective dma engine drivers in the configuration as an indication to which ones should be built. However, this is flawed in multiple ways: - With CONFIG_TI_EDMA=m and CONFIG_SND_SOC_DAVINCI_MCASP=y, is enabled as =m, and we get a link error: sound/soc/ti/davinci-mcasp.o: In function `davinci_mcasp_probe': davinci-mcasp.c:(.text+0x930): undefined reference to `edma_pcm_platform_register' - When CONFIG_SND_SOC_DAVINCI_MCASP=m has already been selected by another driver, the same link error appears even if CONFIG_TI_EDMA is disabled There are possibly other issues here, but it seems that the only reasonable solution is to always build both SND_SOC_TI_EDMA_PCM and SND_SOC_TI_SDMA_PCM as a dependency here. Both are fairly small and do not have any other compile-time dependencies, so the cost is very small, and makes the configuration stage much more consistent. Fixes: f2055e145f29 ("ASoC: ti: Merge davinci and omap directories") Signed-off-by: Arnd Bergmann Acked-by: Peter Ujfalusi Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 92c8f82467502de19d8088fce8b4c6baa213d8ec Author: Arnd Bergmann Date: Thu Mar 7 11:11:30 2019 +0100 ASoC: davinci-mcasp: Fix clang warning without CONFIG_PM [ Upstream commit 8ca5104715cfd14254ea5aecc390ae583b707607 ] Building with clang shows a variable that is only used by the suspend/resume functions but defined outside of their #ifdef block: sound/soc/ti/davinci-mcasp.c:48:12: error: variable 'context_regs' is not needed and will not be emitted We commonly fix these by marking the PM functions as __maybe_unused, but here that would grow the davinci_mcasp structure, so instead add another #ifdef here. Fixes: 1cc0c054f380 ("ASoC: davinci-mcasp: Convert the context save/restore to use array") Signed-off-by: Arnd Bergmann Acked-by: Peter Ujfalusi Reviewed-by: Nathan Chancellor Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 0d6932a68e1e8f2c867c728ab99c1917b0ee8949 Author: Chris Lesiak Date: Thu Mar 7 20:39:00 2019 +0000 spi: Fix zero length xfer bug [ Upstream commit 5442dcaa0d90fc376bdfc179a018931a8f43dea4 ] This fixes a bug for messages containing both zero length and unidirectional xfers. The function spi_map_msg will allocate dummy tx and/or rx buffers for use with unidirectional transfers when the hardware can only do a bidirectional transfer. That dummy buffer will be used in place of a NULL buffer even when the xfer length is 0. Then in the function __spi_map_msg, if he hardware can dma, the zero length xfer will have spi_map_buf called on the dummy buffer. Eventually, __sg_alloc_table is called and returns -EINVAL because nents == 0. This fix prevents the error by not using the dummy buffer when the xfer length is zero. Signed-off-by: Chris Lesiak Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 41462931899159db2047e70a191f6ec1f50dae0e Author: Steve Twiss Date: Tue Feb 26 14:59:59 2019 +0000 regulator: da9055: Fix notifier mutex lock warning [ Upstream commit 5e6afb3832bedf420dd8e4c5b32ed85117c5087d ] The mutex for the regulator_dev must be controlled by the caller of the regulator_notifier_call_chain(), as described in the comment for that function. Failure to mutex lock and unlock surrounding the notifier call results in a kernel WARN_ON_ONCE() which will dump a backtrace for the regulator_notifier_call_chain() when that function call is first made. The mutex can be controlled using the regulator_lock/unlock() API. Fixes: f6130be652d0 ("regulator: DA9055 regulator driver") Suggested-by: Adam Thomson Signed-off-by: Steve Twiss Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit e894c14a14c657c08f7ae9d3bd0e7529516b9e9f Author: Steve Twiss Date: Tue Feb 26 15:19:34 2019 +0000 regulator: da9062: Fix notifier mutex lock warning [ Upstream commit 978995def0f6030aa6b3b494682f673aca13881b ] The mutex for the regulator_dev must be controlled by the caller of the regulator_notifier_call_chain(), as described in the comment for that function. Failure to mutex lock and unlock surrounding the notifier call results in a kernel WARN_ON_ONCE() which will dump a backtrace for the regulator_notifier_call_chain() when that function call is first made. The mutex can be controlled using the regulator_lock/unlock() API. Fixes: 4068e5182ada ("regulator: da9062: DA9062 regulator driver") Suggested-by: Adam Thomson Signed-off-by: Steve Twiss Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit a9324cb5731d2ec120af8e3dfa8c7eea95ad0a81 Author: Steve Twiss Date: Tue Feb 26 15:46:55 2019 +0000 regulator: pv88090: Fix notifier mutex lock warning [ Upstream commit 275513b7695a61b75b2546406ecd0f8e3d9fc8be ] The mutex for the regulator_dev must be controlled by the caller of the regulator_notifier_call_chain(), as described in the comment for that function. Failure to mutex lock and unlock surrounding the notifier call results in a kernel WARN_ON_ONCE() which will dump a backtrace for the regulator_notifier_call_chain() when that function call is first made. The mutex can be controlled using the regulator_lock/unlock() API. Fixes: c90456e36d9c ("regulator: pv88090: new regulator driver") Suggested-by: Adam Thomson Signed-off-by: Steve Twiss Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit d0502fd46a8a84546c9fe67244b071bb07db28ce Author: Steve Twiss Date: Tue Feb 26 15:48:46 2019 +0000 regulator: wm831x: Fix notifier mutex lock warning [ Upstream commit 119c4f5085c45b60cb23c5595e45d06135b89518 ] The mutex for the regulator_dev must be controlled by the caller of the regulator_notifier_call_chain(), as described in the comment for that function. Failure to mutex lock and unlock surrounding the notifier call results in a kernel WARN_ON_ONCE() which will dump a backtrace for the regulator_notifier_call_chain() when that function call is first made. The mutex can be controlled using the regulator_lock/unlock() API. Fixes: e4ee831f949a ("regulator: Add WM831x DC-DC buck convertor support") Suggested-by: Adam Thomson Signed-off-by: Steve Twiss Acked-by: Charles Keepax Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit bda2ceb50315696f616b26c0d8b5bf5b88db0ef3 Author: Steve Twiss Date: Tue Feb 26 15:44:54 2019 +0000 regulator: pv88080: Fix notifier mutex lock warning [ Upstream commit 1867af94cfdf37fc70fe67b3d522e78352800196 ] The mutex for the regulator_dev must be controlled by the caller of the regulator_notifier_call_chain(), as described in the comment for that function. Failure to mutex lock and unlock surrounding the notifier call results in a kernel WARN_ON_ONCE() which will dump a backtrace for the regulator_notifier_call_chain() when that function call is first made. The mutex can be controlled using the regulator_lock/unlock() API. Fixes: 99cf3af5e2d5 ("regulator: pv88080: new regulator driver") Suggested-by: Adam Thomson Signed-off-by: Steve Twiss Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit e092e6a8de2c9dafac78c2b8e4cf6398546e73a9 Author: Steve Twiss Date: Tue Feb 26 15:23:02 2019 +0000 regulator: da9063: Fix notifier mutex lock warning [ Upstream commit 29d40b4a5776ec4727c9f0e00a884423dd5e3366 ] The mutex for the regulator_dev must be controlled by the caller of the regulator_notifier_call_chain(), as described in the comment for that function. Failure to mutex lock and unlock surrounding the notifier call results in a kernel WARN_ON_ONCE() which will dump a backtrace for the regulator_notifier_call_chain() when that function call is first made. The mutex can be controlled using the regulator_lock/unlock() API. Fixes: 69ca3e58d178 ("regulator: da9063: Add Dialog DA9063 voltage regulators support.") Suggested-by: Adam Thomson Signed-off-by: Steve Twiss Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 4b29e0fd93999140bf8d43f9d4a0d95276fb3a6e Author: Steve Twiss Date: Tue Feb 26 15:27:57 2019 +0000 regulator: da9211: Fix notifier mutex lock warning [ Upstream commit 65378de3359d30ebce44762d8b8027f372b5b1c4 ] The mutex for the regulator_dev must be controlled by the caller of the regulator_notifier_call_chain(), as described in the comment for that function. Failure to mutex lock and unlock surrounding the notifier call results in a kernel WARN_ON_ONCE() which will dump a backtrace for the regulator_notifier_call_chain() when that function call is first made. The mutex can be controlled using the regulator_lock/unlock() API. Fixes: 1028a37daa14 ("regulator: da9211: new regulator driver") Suggested-by: Adam Thomson Signed-off-by: Steve Twiss Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 59c5dbc1098a1968b3c49cef37f9c167c3928d2a Author: Steve Twiss Date: Tue Feb 26 15:32:18 2019 +0000 regulator: lp8755: Fix notifier mutex lock warning [ Upstream commit 89b2758c192c35068b07766a6830433bfbdc1f44 ] The mutex for the regulator_dev must be controlled by the caller of the regulator_notifier_call_chain(), as described in the comment for that function. Failure to mutex lock and unlock surrounding the notifier call results in a kernel WARN_ON_ONCE() which will dump a backtrace for the regulator_notifier_call_chain() when that function call is first made. The mutex can be controlled using the regulator_lock/unlock() API. Fixes: b59320cc5a5e ("regulator: lp8755: new driver for LP8755") Suggested-by: Adam Thomson Signed-off-by: Steve Twiss Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit e6791da3039147a8bb3be78598638dec2a0ffd42 Author: Trent Piepho Date: Mon Mar 4 20:18:49 2019 +0000 spi: imx: stop buffer overflow in RX FIFO flush [ Upstream commit c842749ea1d32513f9e603c074d60d7aa07cb2ef ] Commit 71abd29057cb ("spi: imx: Add support for SPI Slave mode") added an RX FIFO flush before start of a transfer. In slave mode, the master may have sent more data than expected and this data will still be in the RX FIFO at the start of the next transfer, and so needs to be flushed. However, the code to do the flush was accidentally saving this data into the previous transfer's RX buffer, clobbering the contents of whatever followed that buffer. Change it to empty the FIFO and throw away the data. Every one of the RX functions for the different eCSPI versions and modes reads the RX FIFO data using the same readl() call, so just use that, rather than using the spi_imx->rx function pointer and making sure all the different rx functions have a working "throw away" mode. There is another issue, which affects master mode when switching from DMA to PIO. There can be extra data in the RX FIFO which triggers this flush code, causing memory corruption in the same manner. I don't know why this data is unexpectedly in the FIFO. It's likely there is a different bug or erratum responsible for that. But regardless of that, I think this is proper fix the for bug at hand here. Fixes: 71abd29057cb ("spi: imx: Add support for SPI Slave mode") Cc: Jiada Wang Cc: Fabio Estevam Cc: Stefan Agner Cc: Shawn Guo Signed-off-by: Trent Piepho Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit f9f03ff29796b52d738dc8494d6d48792919cfa7 Author: Steve Twiss Date: Tue Feb 26 15:42:50 2019 +0000 regulator: pv88060: Fix notifier mutex lock warning [ Upstream commit f58213637206e190453e3bd91f98f535566290a3 ] The mutex for the regulator_dev must be controlled by the caller of the regulator_notifier_call_chain(), as described in the comment for that function. Failure to mutex lock and unlock surrounding the notifier call results in a kernel WARN_ON_ONCE() which will dump a backtrace for the regulator_notifier_call_chain() when that function call is first made. The mutex can be controlled using the regulator_lock/unlock() API. Fixes: f307a7e9b7af ("regulator: pv88060: new regulator driver") Suggested-by: Adam Thomson Signed-off-by: Steve Twiss Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 4d57f6a687ce81e438bcb91efa10f47d72b8e90b Author: Steve Twiss Date: Tue Feb 26 15:35:35 2019 +0000 regulator: ltc3589: Fix notifier mutex lock warning [ Upstream commit f132da2534ec6599c78c4adcef15340cff2e9dd9 ] The mutex for the regulator_dev must be controlled by the caller of the regulator_notifier_call_chain(), as described in the comment for that function. Failure to mutex lock and unlock surrounding the notifier call results in a kernel WARN_ON_ONCE() which will dump a backtrace for the regulator_notifier_call_chain() when that function call is first made. The mutex can be controlled using the regulator_lock/unlock() API. Fixes: 3eb2c7ecb7ea ("regulator: Add LTC3589 support") Suggested-by: Adam Thomson Signed-off-by: Steve Twiss Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 3c8af6f8857ecd1829812ef184effbb693bf7ffc Author: Steve Twiss Date: Tue Feb 26 15:38:56 2019 +0000 regulator: ltc3676: Fix notifier mutex lock warning [ Upstream commit 769fc8d4182c1d1875db7859852afeb436714c5c ] The mutex for the regulator_dev must be controlled by the caller of the regulator_notifier_call_chain(), as described in the comment for that function. Failure to mutex lock and unlock surrounding the notifier call results in a kernel WARN_ON_ONCE() which will dump a backtrace for the regulator_notifier_call_chain() when that function call is first made. The mutex can be controlled using the regulator_lock/unlock() API. Fixes: 37b918a034fe ("regulator: Add LTC3676 support") Suggested-by: Adam Thomson Signed-off-by: Steve Twiss Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit dc7d035419f66aeecabd52b79213a4a68c653226 Author: Steve Twiss Date: Tue Feb 26 15:51:28 2019 +0000 regulator: wm831x isink: Fix notifier mutex lock warning [ Upstream commit f7a621728a6a23bfd2c6ac4d3e42e1303aefde0f ] The mutex for the regulator_dev must be controlled by the caller of the regulator_notifier_call_chain(), as described in the comment for that function. Failure to mutex lock and unlock surrounding the notifier call results in a kernel WARN_ON_ONCE() which will dump a backtrace for the regulator_notifier_call_chain() when that function call is first made. The mutex can be controlled using the regulator_lock/unlock() API. Fixes: d4d6b722e780 ("regulator: Add WM831x ISINK support") Suggested-by: Adam Thomson Signed-off-by: Steve Twiss Acked-by: Charles Keepax Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 0c045f001420a752a9c9fb4f07e23d5bcd765153 Author: Steve Twiss Date: Tue Feb 26 15:54:01 2019 +0000 regulator: wm831x ldo: Fix notifier mutex lock warning [ Upstream commit 8be64b6d87bd47d81753b60ddafe70102ebfd76b ] The mutex for the regulator_dev must be controlled by the caller of the regulator_notifier_call_chain(), as described in the comment for that function. Failure to mutex lock and unlock surrounding the notifier call results in a kernel WARN_ON_ONCE() which will dump a backtrace for the regulator_notifier_call_chain() when that function call is first made. The mutex can be controlled using the regulator_lock/unlock() API. Fixes: d1c6b4fe668b ("regulator: Add WM831x LDO support") Suggested-by: Adam Thomson Signed-off-by: Steve Twiss Acked-by: Charles Keepax Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 36cf255adc4f7f3f575a1f995a637cdb33f0d2a4 Author: Geert Uytterhoeven Date: Tue Mar 12 19:45:13 2019 +0100 spi: rspi: Fix sequencer reset during initialization [ Upstream commit 26843bb128590edd7eba1ad7ce22e4b9f1066ce3 ] While the sequencer is reset after each SPI message since commit 880c6d114fd79a69 ("spi: rspi: Add support for Quad and Dual SPI Transfers on QSPI"), it was never reset for the first message, thus relying on reset state or bootloader settings. Fix this by initializing it explicitly during configuration. Fixes: 0b2182ddac4b8837 ("spi: add support for Renesas RSPI") Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit b5f7f281c07841abe4728b939501ecb8bb530c82 Author: Laurent Pinchart Date: Thu Sep 13 03:45:06 2018 +0300 drm/omap: Notify all devices in the pipeline of output disconnection [ Upstream commit 27a7e3e18419869cdcc414a404f3fe66f1b4e644 ] For HDMI pipelines, when the output gets disconnected the device handling CEC needs to be notified. Instead of guessing which device that would be (and sometimes getting it wrong), notify all devices in the pipeline. Signed-off-by: Laurent Pinchart Reviewed-by: Sebastian Reichel Tested-by: Sebastian Reichel Signed-off-by: Tomi Valkeinen Signed-off-by: Sasha Levin commit 622d0f22d19357b90208cd62bd8b6f28823bbab9 Author: Tony Lindgren Date: Thu Feb 7 07:45:16 2019 -0800 drm/omap: dsi: Fix PM for display blank with paired dss_pll calls [ Upstream commit fe4ed1b457943113ee1138c939fbdeede4af6cf3 ] Currently dsi_display_init_dsi() calls dss_pll_enable() but it is not paired with dss_pll_disable() in dsi_display_uninit_dsi(). This leaves the DSS clocks enabled when the display is blanked wasting about extra 5mW of power while idle. The clock that is left on by not calling dss_pll_disable() is DSS_CLKCTRL bit 10 OPTFCLKEN_SYS_CLK that is the source clock for DSI PLL. We can fix this issue by by making the current dsi_pll_uninit() into dsi_pll_disable(). This way we can just call dss_pll_disable() from dsi_display_uninit_dsi() and the code becomes a bit easier to follow. However, we need to also consider that DSI PLL can be muxed for DVI too as pointed out by Tomi Valkeinen . In the DVI case, we want to unconditionally disable the clocks. To get around this issue, we separate out the DSI lane handling from dsi_pll_enable() and dsi_pll_disable() as suggested by Tomi in an earlier experimental patch. So we must only toggle the DSI regulator based on the vdds_dsi_enabled flag from dsi_display_init_dsi() and dsi_display_uninit_dsi(). We need to make these two changes together to avoid breaking things for DVI when fixing the DSI clock handling. And this all causes a slight renumbering of the error path for dsi_display_init_dsi(). Suggested-by: Tomi Valkeinen Signed-off-by: Tony Lindgren Signed-off-by: Tomi Valkeinen Signed-off-by: Sasha Levin commit 6f8f9a7fc553aaff13839ba89f9fdbee45da3d67 Author: Laurent Pinchart Date: Thu Feb 21 02:51:37 2019 +0200 drm: writeback: Fix leak of writeback job [ Upstream commit e482ae9b5fdc01a343f22f52930e85a6cfdf85eb ] Writeback jobs are allocated when the WRITEBACK_FB_ID is set, and deleted when the jobs complete. This results in both a memory leak of the job and a leak of the framebuffer if the atomic commit returns before the job is queued for processing, for instance if the atomic check fails or if the commit runs in test-only mode. Fix this by implementing the drm_writeback_cleanup_job() function and calling it from __drm_atomic_helper_connector_destroy_state(). As writeback jobs are removed from the state when they're queued for processing, any job left in the state when the state gets destroyed needs to be cleaned up. The existing declaration of the drm_writeback_cleanup_job() function without an implementation hints that this problem was considered, but never addressed. Signed-off-by: Laurent Pinchart Reviewed-by: Brian Starkey Acked-by: Liviu Dudau Signed-off-by: Sasha Levin commit aa46e6c24eb0fecdf6599c858e4c26a6df8b6732 Author: Aditya Pakki Date: Wed Mar 13 11:55:41 2019 -0500 spi : spi-topcliff-pch: Fix to handle empty DMA buffers [ Upstream commit f37d8e67f39e6d3eaf4cc5471e8a3d21209843c6 ] pch_alloc_dma_buf allocated tx, rx DMA buffers which can fail. Further, these buffers are used without a check. The patch checks for these failures and sends the error upstream. Signed-off-by: Aditya Pakki Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 0698bdff44d4909ab20094c2f9a1b3ae4e9eb852 Author: Li RongQing Date: Thu Mar 7 09:16:24 2019 +0800 audit: fix a memleak caused by auditing load module [ Upstream commit 95e0b46fcebd7dbf6850dee96046e4c4ddc7f69c ] module.name will be allocated unconditionally when auditing load module, and audit_log_start() can fail with other reasons, or audit_log_exit maybe not called, caused module.name is not freed so free module.name in audit_free_context and __audit_syscall_exit unreferenced object 0xffff88af90837d20 (size 8): comm "modprobe", pid 1036, jiffies 4294704867 (age 3069.138s) hex dump (first 8 bytes): 69 78 67 62 65 00 ff ff ixgbe... backtrace: [<0000000008da28fe>] __audit_log_kern_module+0x33/0x80 [<00000000c1491e61>] load_module+0x64f/0x3850 [<000000007fc9ae3f>] __do_sys_init_module+0x218/0x250 [<0000000000d4a478>] do_syscall_64+0x117/0x400 [<000000004924ded8>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<000000007dc331dd>] 0xffffffffffffffff Fixes: ca86cad7380e3 ("audit: log module name on init_module") Signed-off-by: Zhang Yu Signed-off-by: Li RongQing [PM: manual merge fixup in __audit_syscall_exit()] Signed-off-by: Paul Moore Signed-off-by: Sasha Levin commit 84b177638c45b2c76bb695ded89ff7f2be4eb1e9 Author: James Smart Date: Tue Mar 12 16:30:06 2019 -0700 scsi: lpfc: Fix use-after-free mailbox cmd completion [ Upstream commit 9b1640686470fbbd1c6efb35ada6fe1427ea8d0f ] When unloading the driver, mailbox commands may be sent without holding a reference on the ndlp. By the time the mailbox command completes, the ndlp may have reduced its ref counts and been freed. The problem was reported by KASAN. While unregistering due to driver unload, have the completion noop'd by setting the ndlp context NULL'd. Due to the unload, no further action was necessary. Also, while reviewing this path, the generic nulling of the context after handling should be slightly moved. Reported by: Bart Van Assche Signed-off-by: Dick Kennedy Signed-off-by: James Smart Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit f5dde36ee952783f928ff42d0d9a9ce1a55c92a4 Author: James Smart Date: Tue Mar 12 16:30:07 2019 -0700 scsi: lpfc: Fix SLI3 commands being issued on SLI4 devices [ Upstream commit c95a3b4b0fb8d351e2329a96f87c4fc96a149505 ] During debug, it was seen that the driver is issuing commands specific to SLI3 on SLI4 devices. Although the adapter correctly rejected the command, this should not be done. Revise the code to stop sending these commands on a SLI4 adapter. Signed-off-by: Dick Kennedy Signed-off-by: James Smart Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 5ee57b325d33967937f92ccfb73937efb324562f Author: Arnd Bergmann Date: Tue Feb 19 12:01:56 2019 -0500 media: saa7146: avoid high stack usage with clang [ Upstream commit 03aa4f191a36f33fce015387f84efa0eee94408e ] Two saa7146/hexium files contain a construct that causes a warning when built with clang: drivers/media/pci/saa7146/hexium_orion.c:210:12: error: stack frame size of 2272 bytes in function 'hexium_probe' [-Werror,-Wframe-larger-than=] static int hexium_probe(struct saa7146_dev *dev) ^ drivers/media/pci/saa7146/hexium_gemini.c:257:12: error: stack frame size of 2304 bytes in function 'hexium_attach' [-Werror,-Wframe-larger-than=] static int hexium_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info) ^ This one happens regardless of KASAN, and the problem is that a constructor to initialize a dynamically allocated structure leads to a copy of that structure on the stack, whereas gcc initializes it in place. Link: https://bugs.llvm.org/show_bug.cgi?id=40776 Signed-off-by: Arnd Bergmann Reviewed-by: Nick Desaulniers Signed-off-by: Hans Verkuil [hverkuil-cisco@xs4all.nl: fix checkpatch warnings] Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit b4b9413c16feced6854aa69db83137a33df56089 Author: James Smart Date: Tue Mar 12 16:30:21 2019 -0700 scsi: lpfc: Fix fc4type information for FDMI [ Upstream commit 32a80c093b524a0682f1c6166c910387b116ffce ] The driver is reporting support for NVME even when not configured for NVME operation. Fix (and make more readable) when NVME protocol support is indicated. Signed-off-by: Dick Kennedy Signed-off-by: James Smart Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit cc047054a1306af8830571dadc1fa8fff0f50a76 Author: James Smart Date: Tue Mar 12 16:30:20 2019 -0700 scsi: lpfc: Fix FDMI manufacturer attribute value [ Upstream commit d67f935b79a76ac9d86dde1a27bdd413feb5d987 ] The FDMI manufacturer value being reported on Linux is inconsistent with other OS's. Set the value to "Emulex Corporation" for consistency. Signed-off-by: Dick Kennedy Signed-off-by: James Smart Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 23c48c397e5a1c345e4eb54854e51332624c0d1c Author: Jernej Skrabec Date: Mon Jan 28 15:55:00 2019 -0500 media: cedrus: Add a quirk for not setting DMA offset [ Upstream commit 70a4f5cda82f7197c350099b66fd23506620810e ] H6 VPU doesn't work if DMA offset is set. Add a quirk for it. Signed-off-by: Jernej Skrabec Acked-by: Maxime Ripard Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 013f1516c0bd4bb86583d2bc20d3fa286da65a20 Author: Hans Verkuil Date: Thu Feb 21 08:35:15 2019 -0500 media: vim2m: replace devm_kzalloc by kzalloc [ Upstream commit ea6c7e34f3b28e165988aa7391310752969842e8 ] It is not possible to use devm_kzalloc since that memory is freed immediately when the device instance is unbound. Various objects like the video device may still be in use since someone has the device node open, and when that is closed it expects the memory to be around. So use kzalloc and release it at the appropriate time. Signed-off-by: Hans Verkuil Reviewed-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 598e10c56433eaf109c87c4c66892597af8d83c6 Author: Hans Verkuil Date: Fri Mar 8 08:02:26 2019 -0500 media: vimc: zero the media_device on probe [ Upstream commit f74267b51cb36321f777807b2e04ca02167ecc08 ] The media_device is part of a static global vimc_device struct. The media framework expects this to be zeroed before it is used, however, since this is a global this is not the case if vimc is unbound and then bound again. So call memset to ensure any left-over values are cleared. Signed-off-by: Hans Verkuil Reviewed-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit c5523bf8e2ded121c32b382c281a127c1cef809c Author: Arnd Bergmann Date: Tue Feb 19 12:01:58 2019 -0500 media: go7007: avoid clang frame overflow warning with KASAN [ Upstream commit ed713a4a1367aca5c0f2f329579465db00c17995 ] clang-8 warns about one function here when KASAN is enabled, even without the 'asan-stack' option: drivers/media/usb/go7007/go7007-fw.c:1551:5: warning: stack frame size of 2656 bytes in function I have reported this issue in the llvm bugzilla, but to make it work with the clang-8 release, a small annotation is still needed. Link: https://bugs.llvm.org/show_bug.cgi?id=38809 Signed-off-by: Arnd Bergmann Signed-off-by: Hans Verkuil [hverkuil-cisco@xs4all.nl: fix checkpatch warning] Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 5701c20771e4d5b94e38c854fa390efd13ce0b5c Author: Hans Verkuil Date: Tue Feb 26 07:54:22 2019 -0500 media: gspca: do not resubmit URBs when streaming has stopped [ Upstream commit e6f8bd59c28f758feea403a70d6c3ef28c50959f ] When streaming is stopped all URBs are killed, but in fill_frame and in bulk_irq this results in an attempt to resubmit the killed URB. That is not what you want and causes spurious kernel messages. So check if streaming has stopped before resubmitting. Also check against gspca_dev->streaming rather than vb2_start_streaming_called() since vb2_start_streaming_called() will return true when in stop_streaming, but gspca_dev->streaming is set to false when stop_streaming is called. Fixes: 6992effe5344 ("gspca: Kill all URBs before releasing any of them") Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit c460364bc41f9083370c2d251d96ac79eda4db5c Author: Helen Fornazier Date: Wed Mar 6 17:42:38 2019 -0500 media: vimc: stream: fix thread state before sleep [ Upstream commit 2978a505aaa981b279ef359f74ba93d25098e0a0 ] The state TASK_UNINTERRUPTIBLE should be set just before schedule_timeout() call, so it knows the sleep mode it should enter. There is no point in setting TASK_UNINTERRUPTIBLE at the initialization of the thread as schedule_timeout() will set the state back to TASK_RUNNING. This fixes a warning in __might_sleep() call, as it's expecting the task to be in TASK_RUNNING state just before changing the state to a sleeping state. Reported-by: Hans Verkuil Signed-off-by: Helen Koike Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 3fd015670af7d0978698acb4828f96c262f09525 Author: Kangjie Lu Date: Fri Mar 15 02:11:56 2019 -0500 scsi: ufs: fix a missing check of devm_reset_control_get [ Upstream commit 63a06181d7ce169d09843645c50fea1901bc9f0a ] devm_reset_control_get could fail, so the fix checks its return value and passes the error code upstream in case it fails. Signed-off-by: Kangjie Lu Acked-by: Avri Altman Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit c9f5ab267fcd7f7db0aea987efd6441ca5f8c5bc Author: Nicholas Kazlauskas Date: Fri Feb 8 13:21:05 2019 -0500 drm/amd/display: Set stream->mode_changed when connectors change [ Upstream commit b9952f93cd2cf5fca82b06a8179c0f5f7b769e83 ] [Why] The kms_plane@plane-position-covered-pipe-*-planes subtests can produce a sequence of atomic commits such that neither active_changed nor mode_changed but connectors_changed. When this happens we remove the old stream from the context and add a new stream but the new stream doesn't have mode_changed=true set. This incorrect programming sequence causes CRC mismatches to occur in the test. The stream->mode_changed value should be set whenever a new stream is created. [How] A new stream is created whenever drm_atomic_crtc_needs_modeset is true. We previously covered the active_changed and mode_changed conditions for the CRTC but connectors_changed is also checked within drm_atomic_crtc_needs_modeset. So just use drm_atomic_crtc_needs_modeset directly to determine the mode_changed flag. Signed-off-by: Nicholas Kazlauskas Reviewed-by: Sun peng Li Acked-by: Bhawanpreet Lakha Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit f70a139421a18aff87396fa93a943e260f2f6c0f Author: Murton Liu Date: Fri Feb 15 15:05:43 2019 -0500 drm/amd/display: Fix Divide by 0 in memory calculations [ Upstream commit 59979bf8be1784ebfc44215031c6c88ca22ae65d ] Check if we get any values equal to 0, and set to 1 if so. Signed-off-by: Murton Liu Reviewed-by: Aric Cyr Acked-by: Bhawanpreet Lakha Acked-by: Sivapiriyan Kumarasamy Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit 12eb14776b3ac23874dc80f4cd87d06eb2dd0e99 Author: Arnd Bergmann Date: Tue Mar 5 08:29:48 2019 -0500 media: staging: davinci_vpfe: disallow building with COMPILE_TEST [ Upstream commit 49dc762cffd8305a861ca649e82dc5533b3e3344 ] The driver should really call dm365_isif_setup_pinmux() through a callback, but uses a hack to include a davinci specific machine header file when compile testing instead. This works almost everywhere, but not on the ARM omap1 platform, which has another header named mach/mux.h. This causes a build failure: drivers/staging/media/davinci_vpfe/dm365_isif.c:2028:2: error: implicit declaration of function 'davinci_cfg_reg' [-Werror,-Wimplicit-function-declaration] davinci_cfg_reg(DM365_VIN_CAM_WEN); ^ drivers/staging/media/davinci_vpfe/dm365_isif.c:2028:2: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes] drivers/staging/media/davinci_vpfe/dm365_isif.c:2028:18: error: use of undeclared identifier 'DM365_VIN_CAM_WEN' davinci_cfg_reg(DM365_VIN_CAM_WEN); ^ drivers/staging/media/davinci_vpfe/dm365_isif.c:2029:18: error: use of undeclared identifier 'DM365_VIN_CAM_VD' davinci_cfg_reg(DM365_VIN_CAM_VD); ^ drivers/staging/media/davinci_vpfe/dm365_isif.c:2030:18: error: use of undeclared identifier 'DM365_VIN_CAM_HD' davinci_cfg_reg(DM365_VIN_CAM_HD); ^ drivers/staging/media/davinci_vpfe/dm365_isif.c:2031:18: error: use of undeclared identifier 'DM365_VIN_YIN4_7_EN' davinci_cfg_reg(DM365_VIN_YIN4_7_EN); ^ drivers/staging/media/davinci_vpfe/dm365_isif.c:2032:18: error: use of undeclared identifier 'DM365_VIN_YIN0_3_EN' davinci_cfg_reg(DM365_VIN_YIN0_3_EN); ^ 7 errors generated. Exclude omap1 from compile-testing, under the assumption that all others still work. Fixes: 4907c73deefe ("media: staging: davinci_vpfe: allow building with COMPILE_TEST") Signed-off-by: Arnd Bergmann Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 0ba2edf3f68f1aa80dbb7cf726ad21a089489ad4 Author: Wenjing Liu Date: Wed Feb 20 14:00:55 2019 -0500 drm/amd/display: add pipe lock during stream update [ Upstream commit e6bddf6c67f9a3abf6f1ef75e52bc1cd228dfe4d ] [why] Stream update will adjust both info packets and stream params, need to make sure all things are applied togather. [how] add pipe lock during stream update Signed-off-by: Wenjing Liu Reviewed-by: Jun Lei Acked-by: Leo Li Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit 10f50fcebfbb982bafc0d37e3c9cc1c414661df9 Author: James Hutchinson Date: Sun Jan 13 16:13:47 2019 -0500 media: m88ds3103: serialize reset messages in m88ds3103_set_frontend [ Upstream commit 981fbe3da20a6f35f17977453bce7dfc1664d74f ] Ref: https://bugzilla.kernel.org/show_bug.cgi?id=199323 Users are experiencing problems with the DVBSky S960/S960C USB devices since the following commit: 9d659ae: ("locking/mutex: Add lock handoff to avoid starvation") The device malfunctions after running for an indeterminable period of time, and the problem can only be cleared by rebooting the machine. It is possible to encourage the problem to surface by blocking the signal to the LNB. Further debugging revealed the cause of the problem. In the following capture: - thread #1325 is running m88ds3103_set_frontend - thread #42 is running ts2020_stat_work a> [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 07 80 [1325] usb 1-1: dvb_usb_v2_generic_io: <<< 08 [42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 68 3f [42] usb 1-1: dvb_usb_v2_generic_io: <<< 08 ff [42] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11 [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 [42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 60 3d [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 ff b> [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 07 00 [1325] usb 1-1: dvb_usb_v2_generic_io: <<< 07 [42] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11 [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 [42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 60 21 [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 ff [42] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11 [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 [42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 60 66 [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 ff [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11 [1325] usb 1-1: dvb_usb_v2_generic_io: <<< 07 [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 60 02 10 0b [1325] usb 1-1: dvb_usb_v2_generic_io: <<< 07 Two i2c messages are sent to perform a reset in m88ds3103_set_frontend: a. 0x07, 0x80 b. 0x07, 0x00 However, as shown in the capture, the regmap mutex is being handed over to another thread (ts2020_stat_work) in between these two messages. >From here, the device responds to every i2c message with an 07 message, and will only return to normal operation following a power cycle. Use regmap_multi_reg_write to group the two reset messages, ensuring both are processed before the regmap mutex is unlocked. Signed-off-by: James Hutchinson Reviewed-by: Antti Palosaari Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 4bd4f7f35c0c11ca8099820610497c313865ac06 Author: Stefan Brüns Date: Sat Jan 19 20:30:04 2019 -0500 media: dvbsky: Avoid leaking dvb frontend [ Upstream commit fdfa59cd63b184e1e96d51ff170fcac739bc6f6f ] Commit 14f4eaeddabc ("media: dvbsky: fix driver unregister logic") fixed a use-after-free by removing the reference to the frontend after deleting the backing i2c device. This has the unfortunate side effect the frontend device is never freed in the dvb core leaving a dangling device, leading to errors when the dvb core tries to register the frontend after e.g. a replug as reported here: https://www.spinics.net/lists/linux-media/msg138181.html media: dvbsky: issues with DVBSky T680CI === [ 561.119145] sp2 8-0040: CIMaX SP2 successfully attached [ 561.119161] usb 2-3: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)... [ 561.119174] sysfs: cannot create duplicate filename '/class/dvb/ dvb0.frontend0' === The use after free happened as dvb_usbv2_disconnect calls in this order: - dvb_usb_device::props->exit(...) - dvb_usbv2_adapter_frontend_exit(...) + if (fe) dvb_unregister_frontend(fe) + dvb_usb_device::props->frontend_detach(...) Moving the release of the i2c device from exit() to frontend_detach() avoids the dangling pointer access and allows the core to unregister the frontend. This was originally reported for a DVBSky T680CI, but it also affects the MyGica T230C. As all supported devices structure the registration/ unregistration identically, apply the change for all device types. Signed-off-by: Stefan Brüns Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit d8b24a6f181239118cc6aaefef7eaf105fbfa9f8 Author: Kangjie Lu Date: Thu Dec 20 23:54:03 2018 -0500 media: si2165: fix a missing check of return value [ Upstream commit 0ab34a08812a3334350dbaf69a018ee0ab3d2ddd ] si2165_readreg8() may fail. Looking into si2165_readreg8(), we will find that "val_tmp" will be an uninitialized value when regmap_read() fails. "val_tmp" is then assigned to "val". So if si2165_readreg8() fails, "val" will be a random value. Further use will lead to undefined behaviors. The fix checks if si2165_readreg8() fails, and if so, returns its error code upstream. Signed-off-by: Kangjie Lu Reviewed-by: Matthias Schwarzott Tested-by: Matthias Schwarzott Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 3c910a02c9ba1862497776d349b968123e7e31be Author: Kai-Heng Feng Date: Tue Dec 11 15:59:38 2018 +0800 igb: Exclude device from suspend direct complete optimization [ Upstream commit 5b6e13216be29ced7350d9c354a1af8fe0ad9a3e ] igb sets different WoL settings in system suspend callback and runtime suspend callback. The suspend direct complete optimization leaves igb in runtime suspended state with wrong WoL setting during system suspend. To fix this, we need to disable suspend direct complete optimization to let igb always use suspend callback to set correct WoL during system suspend. Signed-off-by: Kai-Heng Feng Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin commit dd8772bcb9af8f68a3ab7141130de171ea801603 Author: Noralf Trønnes Date: Fri Feb 22 13:43:29 2019 +0100 tinydrm/mipi-dbi: Use dma-safe buffers for all SPI transfers [ Upstream commit a89bfc5d9a0732d84b4de311e27133daa0586316 ] Buffers passed to spi_sync() must be dma-safe even for tiny buffers since some SPI controllers use DMA for all transfers. Example splat with CONFIG_DMA_API_DEBUG enabled: [ 23.750467] DMA-API: dw_dmac_pci 0000:00:15.0: device driver maps memory from stack [probable addr=000000001e49185d] [ 23.750529] WARNING: CPU: 1 PID: 1296 at kernel/dma/debug.c:1161 check_for_stack+0xb7/0x190 [ 23.750533] Modules linked in: mmc_block(+) spi_pxa2xx_platform(+) pwm_lpss_pci pwm_lpss spi_pxa2xx_pci sdhci_pci cqhci intel_mrfld_pwrbtn extcon_intel_mrfld sdhci intel_mrfld_adc led_class mmc_core ili9341 mipi_dbi tinydrm backlight ti_ads7950 industrialio_triggered_buffer kfifo_buf intel_soc_pmic_mrfld hci_uart btbcm [ 23.750599] CPU: 1 PID: 1296 Comm: modprobe Not tainted 5.0.0-rc7+ #236 [ 23.750605] Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48 [ 23.750620] RIP: 0010:check_for_stack+0xb7/0x190 [ 23.750630] Code: 8b 6d 50 4d 85 ed 75 04 4c 8b 6d 10 48 89 ef e8 2f 8b 44 00 48 89 c6 4a 8d 0c 23 4c 89 ea 48 c7 c7 88 d0 82 b4 e8 40 7c f9 ff <0f> 0b 8b 05 79 00 4b 01 85 c0 74 07 5b 5d 41 5c 41 5d c3 8b 05 54 [ 23.750637] RSP: 0000:ffff97bbc0292fa0 EFLAGS: 00010286 [ 23.750646] RAX: 0000000000000000 RBX: ffff97bbc0290000 RCX: 0000000000000006 [ 23.750652] RDX: 0000000000000007 RSI: 0000000000000002 RDI: ffff94b33e115450 [ 23.750658] RBP: ffff94b33c8578b0 R08: 0000000000000002 R09: 00000000000201c0 [ 23.750664] R10: 00000006ecb0ccc6 R11: 0000000000034f38 R12: 000000000000316c [ 23.750670] R13: ffff94b33c84b250 R14: ffff94b33dedd5a0 R15: 0000000000000001 [ 23.750679] FS: 0000000000000000(0000) GS:ffff94b33e100000(0063) knlGS:00000000f7faf690 [ 23.750686] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 23.750691] CR2: 00000000f7f54faf CR3: 000000000722c000 CR4: 00000000001006e0 [ 23.750696] Call Trace: [ 23.750713] debug_dma_map_sg+0x100/0x340 [ 23.750727] ? dma_direct_map_sg+0x3b/0xb0 [ 23.750739] spi_map_buf+0x25a/0x300 [ 23.750751] __spi_pump_messages+0x2a4/0x680 [ 23.750762] __spi_sync+0x1dd/0x1f0 [ 23.750773] spi_sync+0x26/0x40 [ 23.750790] mipi_dbi_typec3_command_read+0x14d/0x240 [mipi_dbi] [ 23.750802] ? spi_finalize_current_transfer+0x10/0x10 [ 23.750821] mipi_dbi_typec3_command+0x1bc/0x1d0 [mipi_dbi] Reported-by: Andy Shevchenko Signed-off-by: Noralf Trønnes Tested-by: Andy Shevchenko Acked-by: Andy Shevchenko Link: https://patchwork.freedesktop.org/patch/msgid/20190222124329.23046-1-noralf@tronnes.org Signed-off-by: Sasha Levin commit 387c278ed19b33d3f160db12685c852c93be3cbe Author: Kai-Heng Feng Date: Sun Feb 3 01:40:16 2019 +0800 e1000e: Disable runtime PM on CNP+ [ Upstream commit 459d69c407f9ba122f12216555c3012284dc9fd7 ] There are some new e1000e devices can only be woken up from D3 one time, by plugging Ethernet cable. Subsequent cable plugging does set PME bit correctly, but it still doesn't get woken up. Since e1000e connects to the root complex directly, we rely on ACPI to wake it up. In this case, the GPE from _PRW only works once and stops working after that. Though it appears to be a platform bug, e1000e maintainers confirmed that I219 does not support D3. So disable runtime PM on CNP+ chips. We may need to disable earlier generations if this bug also hit older platforms. Bugzilla: https://bugzilla.kernel.org/attachment.cgi?id=280819 Signed-off-by: Kai-Heng Feng Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin commit 88f8c50221522688b2a0e341c3501ebe18ad7c5e Author: Arnd Bergmann Date: Mon Mar 4 15:29:10 2019 -0500 media: staging/intel-ipu3: mark PM function as __maybe_unused [ Upstream commit 948dff7cfa1d7653e7828e7b905863bd24ca5c02 ] The imgu_rpm_dummy_cb() looks like an API misuse that is explained in the comment above it. Aside from that, it also causes a warning when power management support is disabled: drivers/staging/media/ipu3/ipu3.c:794:12: error: 'imgu_rpm_dummy_cb' defined but not used [-Werror=unused-function] The warning is at least easy to fix by marking the function as __maybe_unused. Fixes: 7fc7af649ca7 ("media: staging/intel-ipu3: Add imgu top level pci device driver") Signed-off-by: Arnd Bergmann Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit fac6dcca00b6e20fabf423eeb9db65a4028c90b0 Author: Sakari Ailus Date: Sat Mar 2 10:23:12 2019 -0500 media: v4l2-fwnode: The first default data lane is 0 on C-PHY [ Upstream commit fff35d45e16fae125c6000cb87e254cb634ac7fb ] C-PHY has no clock lanes. Therefore the first data lane is 0 by default. Fixes: edc6d56c2e7e ("media: v4l: fwnode: Support parsing of CSI-2 C-PHY endpoints") Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 7c7175267ab948451b21d5cbe8a5d7cec0efdc06 Author: Kangjie Lu Date: Tue Mar 12 03:33:28 2019 -0500 thunderbolt: property: Fix a NULL pointer dereference [ Upstream commit 106204b56f60abf1bead7dceb88f2be3e34433da ] In case kzalloc fails, the fix releases resources and returns -ENOMEM to avoid the NULL pointer dereference. Signed-off-by: Kangjie Lu Signed-off-by: Mika Westerberg Signed-off-by: Sasha Levin commit 110bffffd5891b3e70a15725c496ecf56a599384 Author: Nicholas Kazlauskas Date: Thu Feb 28 12:57:59 2019 -0500 drm/amd/display: Reset alpha state for planes to the correct values [ Upstream commit eec3d5efd16d13984a88396b685ae17462fb6d87 ] [Why] The plane_reset callback is subclassed but hasn't been updated since the drm helper got updated to include resetting alpha related state (state->alpha and state->pixel_blend_mode). The overlay planes exposed by amdgpu_dm were therefore being rendered as invisible by default ever since supported was exposed for alpha blending properties on overlays. This caused regressions in igt@kms_plane_multiple@atomic-tiling-none and igt@kms_plane@plane-position-covered-pipe tests. [How] Reset the plane state values to their correct values as defined in the drm helper. This fixes the IGT test regression. Signed-off-by: Nicholas Kazlauskas Reviewed-by: Harry Wentland Acked-by: Bhawanpreet Lakha Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit b374f41be4f6d01d508813060c8084cbe2474154 Author: Samson Tam Date: Mon Mar 4 16:21:06 2019 -0500 drm/amd/display: Link train only when link is DP and backend is enabled [ Upstream commit 66acd4418d7de131ef3831e52a8af3d2480e5b15 ] [Why] In certain cases we do link training when we don't have a backend. [How] In dc_link_set_preferred_link_settings(), store preferred link settings first and then verify that the link is DP and the link stream's backend is enabled. If either is false, then we will not do any link retraining. Signed-off-by: Samson Tam Reviewed-by: Aric Cyr Acked-by: Anthony Koo Acked-by: Bhawanpreet Lakha Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit 192978ff7210d7e1f79d3c4fa41ff008e3512a34 Author: Dmytro Laktyushkin Date: Thu Mar 7 13:26:13 2019 -0500 drm/amd/display: fix releasing planes when exiting odm [ Upstream commit bc2193992b00488f5734613ac95b78ef2d2803ab ] Releasing planes should not release the 2nd odm pipe right away, this change leaves us with 2 pipes with null planes and same stream when planes are released during odm. Signed-off-by: Dmytro Laktyushkin Reviewed-by: Tony Cheng Acked-by: Bhawanpreet Lakha Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit c607e4d96b09392d69c011151ab8ce8ef42f6cda Author: Aditya Pakki Date: Wed Mar 20 10:57:54 2019 -0500 thunderbolt: Fix to check for kmemdup failure [ Upstream commit 2cc12751cf464a722ff57b54d17d30c84553f9c0 ] Memory allocated via kmemdup might fail and return a NULL pointer. This patch adds a check on the return value of kmemdup and passes the error upstream. Signed-off-by: Aditya Pakki Reviewed-by: Mukesh Ojha Signed-off-by: Mika Westerberg Signed-off-by: Sasha Levin commit de600ab09db8774d5d0022d9982171da18705ebe Author: Aditya Pakki Date: Wed Mar 20 11:34:09 2019 -0500 thunderbolt: Fix to check return value of ida_simple_get [ Upstream commit 9aabb68568b473bf2f0b179d053b403961e42e4d ] In enumerate_services, ida_simple_get on failure can return an error and leaks memory. The patch ensures that the dev_set_name is set on non failure cases, and releases memory during failure. Signed-off-by: Aditya Pakki Signed-off-by: Mika Westerberg Signed-off-by: Sasha Levin commit 6f83951a273564564a9baf9bf7ca4fbf8e21c446 Author: Rouven Czerwinski Date: Mon Mar 11 11:58:57 2019 +0100 hwrng: omap - Set default quality [ Upstream commit 62f95ae805fa9e1e84d47d3219adddd97b2654b7 ] Newer combinations of the glibc, kernel and openssh can result in long initial startup times on OMAP devices: [ 6.671425] systemd-rc-once[102]: Creating ED25519 key; this may take some time ... [ 142.652491] systemd-rc-once[102]: Creating ED25519 key; done. due to the blocking getrandom(2) system call: [ 142.610335] random: crng init done Set the quality level for the omap hwrng driver allowing the kernel to use the hwrng as an entropy source at boot. Signed-off-by: Rouven Czerwinski Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin commit 657aac988d8adf77336653ba0fe2f4a2196c8590 Author: George Hilliard Date: Wed Mar 20 16:42:05 2019 -0600 staging: mt7621-mmc: Check for nonzero number of scatterlist entries [ Upstream commit d4223e06b6aed581625f574ad8faa71b6c0fc903 ] The buffer descriptor setup loop is correct only if it is setting up at least one bd struct. Besides, there is an error if dma_map_sg() returns 0, which is possible and must be handled. Additionally, remove the BUG_ON() checking sglen, which is unnecessary because we configure DMA with that constraint during init. Signed-off-by: George Hilliard Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit bc25f6bd07569264817dcdcd0418e84bdc522a62 Author: Pu Wen Date: Sat Mar 23 23:42:20 2019 +0800 x86/CPU/hygon: Fix phys_proc_id calculation logic for multi-die processors [ Upstream commit e0ceeae708cebf22c990c3d703a4ca187dc837f5 ] The Hygon family 18h multi-die processor platform supports 1, 2 or 4-Dies per socket. The topology looks like this: System View (with 1-Die 2-Socket): |------------| ------ ----- SOCKET0 | D0 | | D1 | SOCKET1 ------ ----- System View (with 2-Die 2-socket): -------------------- | -------------|------ | | | | ------------ ------------ SOCKET0 | D1 -- D0 | | D3 -- D2 | SOCKET1 ------------ ------------ System View (with 4-Die 2-Socket) : -------------------- | -------------|------ | | | | ------------ ------------ | D1 -- D0 | | D7 -- D6 | | | \/ | | | | \/ | | SOCKET0 | | /\ | | | | /\ | | SOCKET1 | D2 -- D3 | | D4 -- D5 | ------------ ------------ | | | | ------|------------| | -------------------- Currently phys_proc_id = initial_apicid >> bits calculates the physical processor ID from the initial_apicid by shifting *bits*. However, this does not work for 1-Die and 2-Die 2-socket systems. According to document [1] section 2.1.11.1, the bits is the value of CPUID_Fn80000008_ECX[12:15]. The possible values are 4, 5 or 6 which mean: 4 - 1 die 5 - 2 dies 6 - 3/4 dies. Hygon programs the initial ApicId the same way as AMD. The ApicId is read from CPUID_Fn00000001_EBX (see section 2.1.11.1 of referrence [1]) and the definition is as below (see section 2.1.10.2.1.3 of [1]): ------------------------------------------------- Bit | 6 | 5 4 | 3 | 2 1 0 | |-----------|---------|--------|----------------| IDs | Socket ID | Node ID | CCX ID | Core/Thread ID | ------------------------------------------------- So for 3/4-Die configurations, the bits variable is 6, which is the same as the ApicID definition field. For 1-Die and 2-Die configurations, bits is 4 or 5, which will cause the right shifted result to not be exactly the value of socket ID. However, the socket ID should be obtained from ApicId[6]. To fix the problem and match the ApicID field definition, set the shift bits to 6 for all Hygon family 18h multi-die CPUs. Because AMD doesn't have 2-Socket systems with 1-Die/2-Die processors (see reference [2]), this doesn't need to be changed on the AMD side but only for Hygon. References: [1] https://www.amd.com/system/files/TechDocs/54945_PPR_Family_17h_Models_00h-0Fh.pdf [2] https://www.amd.com/en/products/specifications/processors [bp: heavily massage commit message. ] Signed-off-by: Pu Wen Signed-off-by: Borislav Petkov Cc: H. Peter Anvin Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Thomas Lendacky Cc: Yazen Ghannam Cc: x86-ml Link: https://lkml.kernel.org/r/1553355740-19999-1-git-send-email-puwen@hygon.cn Signed-off-by: Sasha Levin commit fadc5b189cd61d364edb08d8e64e66b427b41281 Author: Sameer Pujar Date: Wed Mar 13 17:02:36 2019 +0530 dmaengine: tegra210-adma: use devm_clk_*() helpers [ Upstream commit f6ed6491d565c336a360471e0c29228e34f4380e ] adma driver is using pm_clk_*() interface for managing clock resources. With this it is observed that clocks remain ON always. This happens on Tegra devices which use BPMP co-processor to manage clock resources, where clocks are enabled during prepare phase. This is necessary because clocks to BPMP are always blocking. When pm_clk_*() interface is used on such Tegra devices, clock prepare count is not balanced till remove call happens for the driver and hence clocks are seen ON always. Thus this patch replaces pm_clk_*() with devm_clk_*() framework. Suggested-by: Mohan Kumar D Reviewed-by: Jonathan Hunter Signed-off-by: Sameer Pujar Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin commit 875fee090c7e1617c8da9ceaa7eb860e2255b40a Author: Linus Lüssing Date: Thu Feb 14 16:52:43 2019 +0100 batman-adv: allow updating DAT entry timeouts on incoming ARP Replies [ Upstream commit 099e6cc1582dc2903fecb898bbeae8f7cf4262c7 ] Currently incoming ARP Replies, for example via a DHT-PUT message, do not update the timeout for an already existing DAT entry. These ARP Replies are dropped instead. This however defeats the purpose of the DHCPACK snooping, for instance. Right now, a DAT entry in the DHT will be purged every five minutes, likely leading to a mesh-wide ARP Request broadcast after this timeout. Which then recreates the entry. The idea of the DHCPACK snooping is to be able to update an entry before a timeout happens, to avoid ARP Request flooding. This patch fixes this issue by updating a DAT entry on incoming ARP Replies even if a matching DAT entry already exists. While still filtering the ARP Reply towards the soft-interface, to avoid duplicate messages on the client device side. Signed-off-by: Linus Lüssing Acked-by: Antonio Quartulli Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich Signed-off-by: Sasha Levin commit 62ea36cd5ab376c6b6e60129fd238d6b83acab82 Author: Arnd Bergmann Date: Mon Mar 25 15:23:11 2019 +0100 selinux: avoid uninitialized variable warning [ Upstream commit 98bbbb76f2edcfb8fb2b8f4b3ccc7b6e99d64bd8 ] clang correctly points out a code path that would lead to an uninitialized variable use: security/selinux/netlabel.c:310:6: error: variable 'addr' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] if (ip_hdr(skb)->version == 4) { ^~~~~~~~~~~~~~~~~~~~~~~~~ security/selinux/netlabel.c:322:40: note: uninitialized use occurs here rc = netlbl_conn_setattr(ep->base.sk, addr, &secattr); ^~~~ security/selinux/netlabel.c:310:2: note: remove the 'if' if its condition is always true if (ip_hdr(skb)->version == 4) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ security/selinux/netlabel.c:291:23: note: initialize the variable 'addr' to silence this warning struct sockaddr *addr; ^ = NULL This is probably harmless since we should not see ipv6 packets of CONFIG_IPV6 is disabled, but it's better to rearrange the code so this cannot happen. Signed-off-by: Arnd Bergmann [PM: removed old patchwork link, fixed checkpatch.pl style errors] Signed-off-by: Paul Moore Signed-off-by: Sasha Levin commit 64d49642575f37f794869c5d93b44a328fe459a4 Author: Dave Ertman Date: Wed Feb 13 10:51:08 2019 -0800 ice: Prevent unintended multiple chain resets [ Upstream commit 2ebd4428d93a2f6ce0c813b10a1a43b6a8241fe5 ] In the current implementation of ice_reset_subtask, if multiple reset types are set in the pf->state, the most intrusive one is meant to be performed only, but the bits requesting the other types are not being cleared. This would lead to another reset being performed the next time the service task is scheduled. Change the flow of ice_reset_subtask so that all reset request bits in pf->state are cleared, and we still perform the most intrusive of the resets requested. Signed-off-by: Dave Ertman Signed-off-by: Anirudh Venkataramanan Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin commit 48736a37c585e923e66f7b4d93e1a011901c716d Author: Arnd Bergmann Date: Fri Mar 22 15:25:49 2019 +0100 scsi: lpfc: avoid uninitialized variable warning [ Upstream commit faf5a744f4f8d76e7c03912b5cd381ac8045f6ec ] clang -Wuninitialized incorrectly sees a variable being used without initialization: drivers/scsi/lpfc/lpfc_nvme.c:2102:37: error: variable 'localport' is uninitialized when used here [-Werror,-Wuninitialized] lport = (struct lpfc_nvme_lport *)localport->private; ^~~~~~~~~ drivers/scsi/lpfc/lpfc_nvme.c:2059:38: note: initialize the variable 'localport' to silence this warning struct nvme_fc_local_port *localport; ^ = NULL 1 error generated. This is clearly in dead code, as the condition leading up to it is always false when CONFIG_NVME_FC is disabled, and the variable is always initialized when nvme_fc_register_localport() got called successfully. Change the preprocessor conditional to the equivalent C construct, which makes the code more readable and gets rid of the warning. Signed-off-by: Arnd Bergmann Acked-by: James Smart Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 68ce3d3c259e5a907946de98a19340e24b0dad38 Author: Arnd Bergmann Date: Fri Mar 22 15:25:03 2019 +0100 scsi: qla4xxx: avoid freeing unallocated dma memory [ Upstream commit 608f729c31d4caf52216ea00d20092a80959256d ] Clang -Wuninitialized notices that on is_qla40XX we never allocate any DMA memory in get_fw_boot_info() but attempt to free it anyway: drivers/scsi/qla4xxx/ql4_os.c:5915:7: error: variable 'buf_dma' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] if (!(val & 0x07)) { ^~~~~~~~~~~~~ drivers/scsi/qla4xxx/ql4_os.c:5985:47: note: uninitialized use occurs here dma_free_coherent(&ha->pdev->dev, size, buf, buf_dma); ^~~~~~~ drivers/scsi/qla4xxx/ql4_os.c:5915:3: note: remove the 'if' if its condition is always true if (!(val & 0x07)) { ^~~~~~~~~~~~~~~~~~~ drivers/scsi/qla4xxx/ql4_os.c:5885:20: note: initialize the variable 'buf_dma' to silence this warning dma_addr_t buf_dma; ^ = 0 Skip the call to dma_free_coherent() here. Fixes: 2a991c215978 ("[SCSI] qla4xxx: Boot from SAN support for open-iscsi") Signed-off-by: Arnd Bergmann Reviewed-by: Nathan Chancellor Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit bc89a51fc02d47aac163771c075c63c8bbac3295 Author: Tony Lindgren Date: Fri Mar 22 14:54:05 2019 -0700 usb: core: Add PM runtime calls to usb_hcd_platform_shutdown [ Upstream commit 8ead7e817224d7832fe51a19783cb8fcadc79467 ] If ohci-platform is runtime suspended, we can currently get an "imprecise external abort" on reboot with ohci-platform loaded when PM runtime is implemented for the SoC. Let's fix this by adding PM runtime support to usb_hcd_platform_shutdown. Signed-off-by: Tony Lindgren Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 183341ef8143d8634c93019ac9fcefbe0ebdb9e5 Author: Ludovic Barre Date: Mon Mar 25 18:01:39 2019 +0100 spi: stm32-qspi: add spi_master_put in release function [ Upstream commit a88eceb17ac7e8dc4ad9995681af61c8371668f4 ] This patch adds spi_master_put in release function to drop the controller's refcount. Signed-off-by: Ludovic Barre Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 65137246ffc3a1989997061b4d8d7d99e059859e Author: Neeraj Upadhyay Date: Mon Mar 11 17:28:03 2019 +0530 rcu: Do a single rhp->func read in rcu_head_after_call_rcu() [ Upstream commit b699cce1604e828f19c39845252626eb78cdf38a ] The rcu_head_after_call_rcu() function reads the rhp->func pointer twice, which can result in a false-positive WARN_ON_ONCE() if the callback were passed to call_rcu() between the two reads. Although racing rcu_head_after_call_rcu() with call_rcu() is to be a dubious use case (the return value is not reliable in that case), intermittent and irreproducible warnings are also quite dubious. This commit therefore uses a single READ_ONCE() to pick up the value of rhp->func once, then tests that value twice, thus guaranteeing consistent processing within rcu_head_after_call_rcu()(). Neverthless, racing rcu_head_after_call_rcu() with call_rcu() is still a dubious use case. Signed-off-by: Neeraj Upadhyay [ paulmck: Add blank line after declaration per checkpatch.pl. ] Signed-off-by: Paul E. McKenney Signed-off-by: Sasha Levin commit d2872983d8a19205d76842035a472e086ca17e56 Author: Paul E. McKenney Date: Thu Mar 21 10:26:41 2019 -0700 rcuperf: Fix cleanup path for invalid perf_type strings [ Upstream commit ad092c027713a68a34168942a5ef422e42e039f4 ] If the specified rcuperf.perf_type is not in the rcu_perf_init() function's perf_ops[] array, rcuperf prints some console messages and then invokes rcu_perf_cleanup() to set state so that a future torture test can run. However, rcu_perf_cleanup() also attempts to end the test that didn't actually start, and in doing so relies on the value of cur_ops, a value that is not particularly relevant in this case. This can result in confusing output or even follow-on failures due to attempts to use facilities that have not been properly initialized. This commit therefore sets the value of cur_ops to NULL in this case and inserts a check near the beginning of rcu_perf_cleanup(), thus avoiding relying on an irrelevant cur_ops value. Signed-off-by: Paul E. McKenney Signed-off-by: Sasha Levin commit 8676b9bc80f747e11d5e847e911df16acbd07055 Author: Yazen Ghannam Date: Fri Jul 27 16:40:09 2018 -0500 x86/mce: Handle varying MCA bank counts [ Upstream commit 006c077041dc73b9490fffc4c6af5befe0687110 ] Linux reads MCG_CAP[Count] to find the number of MCA banks visible to a CPU. Currently, this number is the same for all CPUs and a warning is shown if there is a difference. The number of banks is overwritten with the MCG_CAP[Count] value of each following CPU that boots. According to the Intel SDM and AMD APM, the MCG_CAP[Count] value gives the number of banks that are available to a "processor implementation". The AMD BKDGs/PPRs further clarify that this value is per core. This value has historically been the same for every core in the system, but that is not an architectural requirement. Future AMD systems may have different MCG_CAP[Count] values per core, so the assumption that all CPUs will have the same MCG_CAP[Count] value will no longer be valid. Also, the first CPU to boot will allocate the struct mce_banks[] array using the number of banks based on its MCG_CAP[Count] value. The machine check handler and other functions use the global number of banks to iterate and index into the mce_banks[] array. So it's possible to use an out-of-bounds index on an asymmetric system where a following CPU sees a MCG_CAP[Count] value greater than its predecessors. Thus, allocate the mce_banks[] array to the maximum number of banks. This will avoid the potential out-of-bounds index since the value of mca_cfg.banks is capped to MAX_NR_BANKS. Set the value of mca_cfg.banks equal to the max of the previous value and the value for the current CPU. This way mca_cfg.banks will always represent the max number of banks detected on any CPU in the system. This will ensure that all CPUs will access all the banks that are visible to them. A CPU that can access fewer than the max number of banks will find the registers of the extra banks to be read-as-zero. Furthermore, print the resulting number of MCA banks in use. Do this in mcheck_late_init() so that the final value is printed after all CPUs have been initialized. Finally, get bank count from target CPU when doing injection with mce-inject module. [ bp: Remove out-of-bounds example, passify and cleanup commit message. ] Signed-off-by: Yazen Ghannam Signed-off-by: Borislav Petkov Cc: "H. Peter Anvin" Cc: Ingo Molnar Cc: linux-edac Cc: Pu Wen Cc: Thomas Gleixner Cc: Tony Luck Cc: Vishal Verma Cc: x86-ml Link: https://lkml.kernel.org/r/20180727214009.78289-1-Yazen.Ghannam@amd.com Signed-off-by: Sasha Levin commit acd5d079d6d83365c91859fe5d66bea6f6848d56 Author: Paul E. McKenney Date: Thu Mar 21 09:27:28 2019 -0700 rcutorture: Fix cleanup path for invalid torture_type strings [ Upstream commit b813afae7ab6a5e91b4e16cc567331d9c2ae1f04 ] If the specified rcutorture.torture_type is not in the rcu_torture_init() function's torture_ops[] array, rcutorture prints some console messages and then invokes rcu_torture_cleanup() to set state so that a future torture test can run. However, rcu_torture_cleanup() also attempts to end the test that didn't actually start, and in doing so relies on the value of cur_ops, a value that is not particularly relevant in this case. This can result in confusing output or even follow-on failures due to attempts to use facilities that have not been properly initialized. This commit therefore sets the value of cur_ops to NULL in this case and inserts a check near the beginning of rcu_torture_cleanup(), thus avoiding relying on an irrelevant cur_ops value. Reported-by: kernel test robot Signed-off-by: Paul E. McKenney Signed-off-by: Sasha Levin commit a1f655148f9cdda274df7c2cf62b395e5e76479b Author: Tony Luck Date: Tue Mar 12 10:09:38 2019 -0700 x86/mce: Fix machine_check_poll() tests for error types [ Upstream commit f19501aa07f18268ab14f458b51c1c6b7f72a134 ] There has been a lurking "TBD" in the machine check poll routine ever since it was first split out from the machine check handler. The potential issue is that the poll routine may have just begun a read from the STATUS register in a machine check bank when the hardware logs an error in that bank and signals a machine check. That race used to be pretty small back when machine checks were broadcast, but the addition of local machine check means that the poll code could continue running and clear the error from the bank before the local machine check handler on another CPU gets around to reading it. Fix the code to be sure to only process errors that need to be processed in the poll code, leaving other logged errors alone for the machine check handler to find and process. [ bp: Massage a bit and flip the "== 0" check to the usual !(..) test. ] Fixes: b79109c3bbcf ("x86, mce: separate correct machine check poller and fatal exception handler") Fixes: ed7290d0ee8f ("x86, mce: implement new status bits") Reported-by: Ashok Raj Signed-off-by: Tony Luck Signed-off-by: Borislav Petkov Cc: Ashok Raj Cc: "H. Peter Anvin" Cc: Ingo Molnar Cc: linux-edac Cc: Thomas Gleixner Cc: x86-ml Cc: Yazen Ghannam Link: https://lkml.kernel.org/r/20190312170938.GA23035@agluck-desk Signed-off-by: Sasha Levin commit a77b9dc7a0b35de1a559fb21a88793c7ac9447ac Author: Leon Romanovsky Date: Sun Mar 17 12:11:14 2019 +0200 overflow: Fix -Wtype-limits compilation warnings [ Upstream commit dc7fe518b0493faa0af0568d6d8c2a33c00f58d0 ] Attempt to use check_shl_overflow() with inputs of unsigned type produces the following compilation warnings. drivers/infiniband/hw/mlx5/qp.c: In function _set_user_rq_size_: ./include/linux/overflow.h:230:6: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] _s >= 0 && _s < 8 * sizeof(*d) ? _s : 0; \ ^~ drivers/infiniband/hw/mlx5/qp.c:5820:6: note: in expansion of macro _check_shl_overflow_ if (check_shl_overflow(rwq->wqe_count, rwq->wqe_shift, &rwq->buf_size)) ^~~~~~~~~~~~~~~~~~ ./include/linux/overflow.h:232:26: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] (_to_shift != _s || *_d < 0 || _a < 0 || \ ^ drivers/infiniband/hw/mlx5/qp.c:5820:6: note: in expansion of macro _check_shl_overflow_ if (check_shl_overflow(rwq->wqe_count, rwq->wqe_shift, &rwq->buf_size)) ^~~~~~~~~~~~~~~~~~ ./include/linux/overflow.h:232:36: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] (_to_shift != _s || *_d < 0 || _a < 0 || \ ^ drivers/infiniband/hw/mlx5/qp.c:5820:6: note: in expansion of macro _check_shl_overflow_ if (check_shl_overflow(rwq->wqe_count, rwq->wqe_shift,&rwq->buf_size)) ^~~~~~~~~~~~~~~~~~ Fixes: 0c66847793d1 ("overflow.h: Add arithmetic shift helper") Reviewed-by: Bart Van Assche Acked-by: Kees Cook Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin commit 1937f4f0b59e4a2638b97b8b5e2614ad7a7b9085 Author: George Hilliard Date: Tue Mar 26 19:50:57 2019 -0600 staging: mt7621-mmc: Initialize completions a single time during probe [ Upstream commit 7ca8c2c8bbeda2a2a2a9898cd35066bc1dc83836 ] The module was initializing completions whenever it was going to wait on them, and not when the completion was allocated. This is incorrect according to the completion docs: Calling init_completion() on the same completion object twice is most likely a bug [...] Re-initialization is also unnecessary because the module never uses complete_all(). Fix this by only ever initializing the completion a single time, and log if the completions are not consumed as intended (this is not a fatal problem, but should not go unnoticed). Signed-off-by: George Hilliard Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 155599edd7afdda2c9641b294966040899050f3a Author: Kangjie Lu Date: Fri Mar 15 02:07:12 2019 -0500 tty: ipwireless: fix missing checks for ioremap [ Upstream commit 1bbb1c318cd8a3a39e8c3e2e83d5e90542d6c3e3 ] ipw->attr_memory and ipw->common_memory are assigned with the return value of ioremap. ioremap may fail, but no checks are enforced. The fix inserts the checks to avoid potential NULL pointer dereferences. Signed-off-by: Kangjie Lu Reviewed-by: David Sterba Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit ff5e32fa5906498d0d87bc77170225914c7681c2 Author: Pankaj Gupta Date: Tue Mar 19 11:34:06 2019 +0530 virtio_console: initialize vtermno value for ports [ Upstream commit 4b0a2c5ff7215206ea6135a405f17c5f6fca7d00 ] For regular serial ports we do not initialize value of vtermno variable. A garbage value is assigned for non console ports. The value can be observed as a random integer with [1]. [1] vim /sys/kernel/debug/virtio-ports/vport*p* This patch initialize the value of vtermno for console serial ports to '1' and regular serial ports are initiaized to '0'. Reported-by: siliu@redhat.com Signed-off-by: Pankaj Gupta Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit bbd788ade88d54f682c6d824c565402864c4c55e Author: Chad Dupuis Date: Tue Mar 26 00:38:35 2019 -0700 scsi: qedf: Add missing return in qedf_post_io_req() in the fcport offload check [ Upstream commit c5e06ba2f76809ad1492fdad312e81335df46bc5 ] Fixes the following crash as the return was missing from the check if an fcport is offloaded. If we hit this code we continue to try to post an invalid task which can lead to the crash: [30259.616411] [0000:61:00.3]:[qedf_post_io_req:989]:3: Session not offloaded yet. [30259.616413] [0000:61:00.3]:[qedf_upload_connection:1340]:3: Uploading connection port_id=490020. [30259.623769] BUG: unable to handle kernel NULL pointer dereference at 0000000000000198 [30259.631645] IP: [] qedf_init_task.isra.16+0x3d/0x450 [qedf] [30259.638816] PGD 0 [30259.640841] Oops: 0000 [#1] SMP [30259.644098] Modules linked in: fuse xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables devlink ip6table_filter ip6_tables iptable_filter vfat fat ib_isert iscsi_target_mod ib_srpt target_core_mod ib_srp scsi_transport_srp ib_ipoib ib_ucm ib_umad dm_service_time skx_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel rpcrdma sunrpc rdma_ucm ib_uverbs lrw gf128mul ib_iser rdma_cm iw_cm ib_cm libiscsi scsi_transport_iscsi qedr(OE) glue_helper ablk_helper cryptd ib_core dm_round_robin joydev pcspkr ipmi_ssif ses enclosure ipmi_si ipmi_devintf ipmi_msghandler mei_me [30259.715529] mei sg hpilo hpwdt shpchp wmi lpc_ich acpi_power_meter dm_multipath ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic uas usb_storage mgag200 qedf(OE) i2c_algo_bit libfcoe drm_kms_helper libfc syscopyarea sysfillrect scsi_transport_fc qede(OE) sysimgblt fb_sys_fops ptp ttm pps_core drm qed(OE) smartpqi crct10dif_pclmul crct10dif_common crc32c_intel i2c_core scsi_transport_sas scsi_tgt dm_mirror dm_region_hash dm_log dm_mod [30259.754237] CPU: 9 PID: 977 Comm: kdmwork-253:7 Kdump: loaded Tainted: G W OE ------------ 3.10.0-862.el7.x86_64 #1 [30259.765664] Hardware name: HPE Synergy 480 Gen10/Synergy 480 Gen10 Compute Module, BIOS I42 04/04/2018 [30259.775000] task: ffff8c801efd0000 ti: ffff8c801efd8000 task.ti: ffff8c801efd8000 [30259.782505] RIP: 0010:[] [] qedf_init_task.isra.16+0x3d/0x450 [qedf] [30259.792116] RSP: 0018:ffff8c801efdbbb0 EFLAGS: 00010046 [30259.797444] RAX: 0000000000000000 RBX: ffffa7f1450948d8 RCX: ffff8c7fe5bc40c8 [30259.804600] RDX: ffff8c800715b300 RSI: ffffa7f1450948d8 RDI: ffff8c80169c2480 [30259.811755] RBP: ffff8c801efdbc30 R08: 00000000000000ae R09: ffff8c800a314540 [30259.818911] R10: ffff8c7fe5bc40c8 R11: ffff8c801efdb8ae R12: 0000000000000000 [30259.826068] R13: ffff8c800715b300 R14: ffff8c80169c2480 R15: ffff8c8005da28e0 [30259.833223] FS: 0000000000000000(0000) GS:ffff8c803f840000(0000) knlGS:0000000000000000 [30259.841338] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [30259.847100] CR2: 0000000000000198 CR3: 000000081242e000 CR4: 00000000007607e0 [30259.854256] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [30259.861412] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [30259.868568] PKRU: 00000000 [30259.871278] Call Trace: [30259.873737] [] qedf_post_io_req+0x148/0x680 [qedf] [30259.880201] [] qedf_queuecommand+0x1f0/0x240 [qedf] [30259.886749] [] scsi_dispatch_cmd+0xb0/0x240 [30259.892600] [] scsi_request_fn+0x4cc/0x680 [30259.898364] [] __blk_run_queue+0x39/0x50 [30259.903954] [] __elv_add_request+0xd3/0x260 [30259.909805] [] blk_insert_cloned_request+0xf0/0x1b0 [30259.916358] [] map_request+0x142/0x220 [dm_mod] [30259.922560] [] map_tio_request+0x16/0x40 [dm_mod] [30259.928932] [] kthread_worker_fn+0x85/0x180 [30259.934782] [] ? kthread_stop+0xf0/0xf0 [30259.940284] [] kthread+0xd1/0xe0 [30259.945176] [] ? insert_kthread_work+0x40/0x40 [30259.951290] [] ret_from_fork_nospec_begin+0x7/0x21 [30259.957750] [] ? insert_kthread_work+0x40/0x40 [30259.963860] Code: fe 41 55 49 89 d5 41 54 53 48 89 f3 48 83 ec 58 4c 8b 67 28 4c 8b 4e 18 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 4c 8b 7e 58 <49> 8b 84 24 98 01 00 00 48 8b 00 f6 80 31 01 00 00 10 0f 85 0b [30259.983372] RIP [] qedf_init_task.isra.16+0x3d/0x450 [qedf] [30259.990630] RSP [30259.994127] CR2: 0000000000000198 Signed-off-by: Chad Dupuis Signed-off-by: Saurav Kashyap Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit faa3f27911352ab2c23e5c8e0fb0801b8e4dd092 Author: Thomas Gleixner Date: Sat Mar 23 11:36:19 2019 +0100 timekeeping: Force upper bound for setting CLOCK_REALTIME [ Upstream commit 7a8e61f8478639072d402a26789055a4a4de8f77 ] Several people reported testing failures after setting CLOCK_REALTIME close to the limits of the kernel internal representation in nanoseconds, i.e. year 2262. The failures are exposed in subsequent operations, i.e. when arming timers or when the advancing CLOCK_MONOTONIC makes the calculation of CLOCK_REALTIME overflow into negative space. Now people start to paper over the underlying problem by clamping calculations to the valid range, but that's just wrong because such workarounds will prevent detection of real issues as well. It is reasonable to force an upper bound for the various methods of setting CLOCK_REALTIME. Year 2262 is the absolute upper bound. Assume a maximum uptime of 30 years which is plenty enough even for esoteric embedded systems. That results in an upper bound of year 2232 for setting the time. Once that limit is reached in reality this limit is only a small part of the problem space. But until then this stops people from trying to paper over the problem at the wrong places. Reported-by: Xiongfeng Wang Reported-by: Hongbo Yao Signed-off-by: Thomas Gleixner Cc: John Stultz Cc: Stephen Boyd Cc: Miroslav Lichvar Cc: Arnd Bergmann Cc: Richard Cochran Cc: Peter Zijlstra Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1903231125480.2157@nanos.tec.linutronix.de Signed-off-by: Sasha Levin commit 075c1c01bb7ee07d96a4b0276784f4548b1a3a25 Author: Laurent Pinchart Date: Wed Mar 6 22:48:35 2019 +0200 drm: rcar-du: lvds: Set LVEN and LVRES bits together on D3 [ Upstream commit 00d082cc4ea6e42ec4fed832a1020231bb1ca150 ] On the D3 SoC the LVDS PHY must be enabled in the same register write that enables the LVDS output. Skip writing the LVEN bit independently on that platform, it will be set by the write that sets LVRES. Signed-off-by: Laurent Pinchart Reviewed-by: Jacopo Mondi Signed-off-by: Sasha Levin commit 9ea161c8c8091bc28e028d9c5f89901de212ac7b Author: Aditya Pakki Date: Mon Mar 25 16:25:22 2019 -0500 thunderbolt: Fix to check the return value of kmemdup [ Upstream commit fd21b79e541e4666c938a344f3ad2df74b4f5120 ] uuid in add_switch is allocted via kmemdup which can fail. The patch logs the error and cleans up the allocated memory for switch. Signed-off-by: Aditya Pakki Reviewed-by: Mukesh Ojha Signed-off-by: Mika Westerberg Signed-off-by: Sasha Levin commit 500d7e1377bf9a844af3422876ffb510a698a129 Author: Kangjie Lu Date: Mon Mar 25 15:23:08 2019 -0500 thunderbolt: property: Fix a missing check of kzalloc [ Upstream commit 6183d5a51866f3acdeeb66b75e87d44025b01a55 ] No check is enforced for the return value of kzalloc, which may lead to NULL-pointer dereference. The patch fixes this issue. Signed-off-by: Kangjie Lu Reviewed-by: Mukesh Ojha Signed-off-by: Mika Westerberg Signed-off-by: Sasha Levin commit 86606cb6c5693ed65d2b2bfe0b2d2bd3b0073258 Author: Ard Biesheuvel Date: Thu Mar 28 20:34:26 2019 +0100 efifb: Omit memory map check on legacy boot [ Upstream commit c2999c281ea2d2ebbdfce96cecc7b52e2ae7c406 ] Since the following commit: 38ac0287b7f4 ("fbdev/efifb: Honour UEFI memory map attributes when mapping the FB") efifb_probe() checks its memory range via efi_mem_desc_lookup(), and this leads to a spurious error message: EFI_MEMMAP is not enabled at every boot on KVM. This is quite annoying since the error message appears even if you set "quiet" boot option. Since this happens on legacy boot, which strangely enough exposes a EFI framebuffer via screen_info, let's double check that we are doing an EFI boot before attempting to access the EFI memory map. Reported-by: Takashi Iwai Tested-by: Takashi Iwai Signed-off-by: Ard Biesheuvel Cc: Linus Torvalds Cc: Matt Fleming Cc: Peter Jones Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20190328193429.21373-3-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin commit 3e90b7f4dee2790147e94bfb3bf629f54b116c38 Author: Ezequiel Garcia Date: Thu Feb 28 10:28:34 2019 -0500 media: gspca: Kill URBs on USB device disconnect [ Upstream commit 9b9ea7c2b57a0c9c3341fc6db039d1f7971a432e ] In order to prevent ISOC URBs from being infinitely resubmitted, the driver's USB disconnect handler must kill all the in-flight URBs. While here, change the URB packet status message to a debug level, to avoid spamming the console too much. This commit fixes a lockup caused by an interrupt storm coming from the URB completion handler. Signed-off-by: Ezequiel Garcia Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 001bda1a3b9f22c8d17c77aec8dfcf2bc20838a9 Author: Dan Carpenter Date: Tue Mar 26 01:12:07 2019 -0400 media: wl128x: prevent two potential buffer overflows [ Upstream commit 9c2ccc324b3a6cbc865ab8b3e1a09e93d3c8ade9 ] Smatch marks skb->data as untrusted so it warns that "evt_hdr->dlen" can copy up to 255 bytes and we only have room for two bytes. Even if this comes from the firmware and we trust it, the new policy generally is just to fix it as kernel hardenning. I can't test this code so I tried to be very conservative. I considered not allowing "evt_hdr->dlen == 1" because it doesn't initialize the whole variable but in the end I decided to allow it and manually initialized "asic_id" and "asic_ver" to zero. Fixes: e8454ff7b9a4 ("[media] drivers:media:radio: wl128x: FM Driver Common sources") Signed-off-by: Dan Carpenter Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 8307fad2bb51b3f4f873edef9bb9861b90c48de6 Author: Kangjie Lu Date: Sat Mar 9 02:20:56 2019 -0500 media: video-mux: fix null pointer dereferences [ Upstream commit aeb0d0f581e2079868e64a2e5ee346d340376eae ] devm_kcalloc may fail and return a null pointer. The fix returns -ENOMEM upon failures to avoid null pointer dereferences. Signed-off-by: Kangjie Lu Reviewed-by: Philipp Zabel Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 29af8f36ea8b83eed0608d86fae1ff51d0b2728b Author: Tetsuo Handa Date: Sun Mar 17 14:02:31 2019 +0900 kobject: Don't trigger kobject_uevent(KOBJ_REMOVE) twice. [ Upstream commit c03a0fd0b609e2f5c669c2b7f27c8e1928e9196e ] syzbot is hitting use-after-free bug in uinput module [1]. This is because kobject_uevent(KOBJ_REMOVE) is called again due to commit 0f4dafc0563c6c49 ("Kobject: auto-cleanup on final unref") after memory allocation fault injection made kobject_uevent(KOBJ_REMOVE) from device_del() from input_unregister_device() fail, while uinput_destroy_device() is expecting that kobject_uevent(KOBJ_REMOVE) is not called after device_del() from input_unregister_device() completed. That commit intended to catch cases where nobody even attempted to send "remove" uevents. But there is no guarantee that an event will ultimately be sent. We are at the point of no return as far as the rest of the kernel is concerned; there are no repeats or do-overs. Also, it is not clear whether some subsystem depends on that commit. If no subsystem depends on that commit, it will be better to remove the state_{add,remove}_uevent_sent logic. But we don't want to risk a regression (in a patch which will be backported) by trying to remove that logic. Therefore, as a first step, let's avoid the use-after-free bug by making sure that kobject_uevent(KOBJ_REMOVE) won't be triggered twice. [1] https://syzkaller.appspot.com/bug?id=8b17c134fe938bbddd75a45afaa9e68af43a362d Reported-by: syzbot Analyzed-by: Dmitry Torokhov Fixes: 0f4dafc0563c6c49 ("Kobject: auto-cleanup on final unref") Cc: Kay Sievers Signed-off-by: Tetsuo Handa Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 9e51d0515eae714f40d49d6c7a1af2cc9a733f83 Author: Sowjanya Komatineni Date: Tue Mar 26 22:56:32 2019 -0700 spi: tegra114: reset controller on probe [ Upstream commit 019194933339b3e9b486639c8cb3692020844d65 ] Fixes: SPI driver can be built as module so perform SPI controller reset on probe to make sure it is in valid state before initiating transfer. Signed-off-by: Sowjanya Komatineni Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 11468954439a2e9c74073c546a7a91e7066d3486 Author: Hans de Goede Date: Fri Mar 22 08:41:40 2019 +0100 HID: logitech-hidpp: change low battery level threshold from 31 to 30 percent [ Upstream commit 1f87b0cd32b3456d7efdfb017fcf74d0bfe3ec29 ] According to hidpp20_batterylevel_get_battery_info my Logitech K270 keyboard reports only 2 battery levels. This matches with what I've seen after testing with batteries at varying level of fullness, it always reports either 5% or 30%. Windows reports "battery good" for the 30% level. I've captured an USB trace of Windows reading the battery and it is getting the same info as the Linux hidpp code gets. Now that Linux handles these devices as hidpp devices, it reports the battery as being low as it treats anything under 31% as low, this leads to the user constantly getting a "Keyboard battery is low" warning from GNOME3, which is very annoying. This commit fixes this by changing the low threshold to anything under 30%, which I assume is what Windows does. Signed-off-by: Hans de Goede Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin commit fc7f4aaa7f7d6a8f56ea11a9ffc002dd3741517a Author: Takeshi Kihara Date: Fri Sep 28 16:33:06 2018 +0900 clk: renesas: rcar-gen3: Correct parent clock of Audio-DMAC [ Upstream commit b9df2ea2b8d09ad850afe4d4a0403cb23d9e0c02 ] The clock sources of the AXI-bus clock (266.66 MHz) used for Audio-DMAC DMA transfers are: Channel R-Car H3 R-Car M3-W R-Car M3-N R-Car E3 --------------------------------------------------------------- Audio-DMAC0 S1D2 S1D2 S1D2 S1D2 Audio-DMAC1 S1D2 S1D2 S1D2 - As a result, change the parent clocks of the Audio-DMAC{0,1} module clocks on R-Car H3, R-Car M3-W, and R-Car M3-N to S1D2, and change the parent clock of the Audio-DMAC0 module on R-Car E3 to S1D2. NOTE: This information will be reflected in a future revision of the R-Car Gen3 Hardware Manual. Signed-off-by: Takeshi Kihara [geert: Update R-Car D3, RZ/G2M, and RZ/G2E] Signed-off-by: Geert Uytterhoeven Reviewed-by: Simon Horman Signed-off-by: Sasha Levin commit 3e8d1b5d588bf66a7ceb0d289c10d60fdc315471 Author: Ming Lei Date: Fri Mar 29 15:07:54 2019 +0800 block: pass page to xen_biovec_phys_mergeable [ Upstream commit 0383ad4374f7ad7edd925a2ee4753035c3f5508a ] xen_biovec_phys_mergeable() only needs .bv_page of the 2nd bio bvec for checking if the two bvecs can be merged, so pass page to xen_biovec_phys_mergeable() directly. No function change. Cc: ris Ostrovsky Cc: Juergen Gross Cc: xen-devel@lists.xenproject.org Cc: Omar Sandoval Cc: Christoph Hellwig Reviewed-by: Christoph Hellwig Reviewed-by: Boris Ostrovsky Signed-off-by: Ming Lei Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit 75a20a8c0fc93f2e4e683413c356a5a830e0dda8 Author: Takeshi Kihara Date: Fri Sep 28 16:18:00 2018 +0900 clk: renesas: rcar-gen3: Correct parent clock of SYS-DMAC [ Upstream commit 3c772f71a552d343a96868ed9a809f9047be94f5 ] The clock sources of the AXI BUS clock (266.66 MHz) used for SYS-DMAC DMA transfers are: Channel R-Car H3 R-Car M3-W R-Car M3-N ------------------------------------------------- SYS-DMAC0 S0D3 S0D3 S0D3 SYS-DMAC1 S3D1 S3D1 S3D1 SYS-DMAC2 S3D1 S3D1 S3D1 As a result, change the parent clocks of the SYS-DMAC{1,2} module clocks on R-Car H3, R-Car M3-W, and R-Car M3-N to S3D1. NOTE: This information will be reflected in a future revision of the R-Car Gen3 Hardware Manual. Signed-off-by: Takeshi Kihara [geert: Update RZ/G2M] Signed-off-by: Geert Uytterhoeven Reviewed-by: Simon Horman Signed-off-by: Sasha Levin commit 0e9fbbee52f8481faab34970386f0ec1debc1b3f Author: Gustavo A. R. Silva Date: Fri Mar 29 10:27:26 2019 -0500 cxgb3/l2t: Fix undefined behaviour [ Upstream commit 76497732932f15e7323dc805e8ea8dc11bb587cf ] The use of zero-sized array causes undefined behaviour when it is not the last member in a structure. As it happens to be in this case. Also, the current code makes use of a language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as this one is a flexible array member, introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last. Which is beneficial to cultivate a high-quality code. Fixes: e48f129c2f20 ("[SCSI] cxgb3i: convert cdev->l2opt to use rcu to prevent NULL dereference") Signed-off-by: Gustavo A. R. Silva Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 59ccb4e49bfb06e2696b819626a718bb34ff4810 Author: Wen Yang Date: Tue Feb 26 16:17:50 2019 +0800 ASoC: fsl_utils: fix a leaked reference by adding missing of_node_put [ Upstream commit c705247136a523488eac806bd357c3e5d79a7acd ] The call to of_parse_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./sound/soc/fsl/fsl_utils.c:74:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 38, but without a corresponding object release within this function. Signed-off-by: Wen Yang Cc: Timur Tabi Cc: Nicolin Chen Cc: Xiubo Li Cc: Fabio Estevam Cc: Liam Girdwood Cc: Mark Brown Cc: Jaroslav Kysela Cc: Takashi Iwai Cc: alsa-devel@alsa-project.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit a676a261498e39bf2060bc2dea24830b3e180500 Author: Wen Yang Date: Tue Feb 26 16:17:51 2019 +0800 ASoC: eukrea-tlv320: fix a leaked reference by adding missing of_node_put [ Upstream commit b820d52e7eed7b30b2dfef5f4213a2bc3cbea6f3 ] The call to of_parse_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./sound/soc/fsl/eukrea-tlv320.c:121:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 102, but without a correspo nding object release within this function. ./sound/soc/fsl/eukrea-tlv320.c:127:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 102, but without a correspo nding object release within this function. Signed-off-by: Wen Yang Cc: Liam Girdwood Cc: Mark Brown Cc: Jaroslav Kysela Cc: Takashi Iwai Cc: alsa-devel@alsa-project.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 60354a853c18707d6de1a9e086194e5bcf6f8d28 Author: Nicolas Saenz Julienne Date: Wed Mar 27 11:18:48 2019 +0100 HID: core: move Usage Page concatenation to Main item [ Upstream commit 58e75155009cc800005629955d3482f36a1e0eec ] As seen on some USB wireless keyboards manufactured by Primax, the HID parser was using some assumptions that are not always true. In this case it's s the fact that, inside the scope of a main item, an Usage Page will always precede an Usage. The spec is not pretty clear as 6.2.2.7 states "Any usage that follows is interpreted as a Usage ID and concatenated with the Usage Page". While 6.2.2.8 states "When the parser encounters a main item it concatenates the last declared Usage Page with a Usage to form a complete usage value." Being somewhat contradictory it was decided to match Window's implementation, which follows 6.2.2.8. In summary, the patch moves the Usage Page concatenation from the local item parsing function to the main item parsing function. Signed-off-by: Nicolas Saenz Julienne Reviewed-by: Terry Junge Signed-off-by: Benjamin Tissoires Signed-off-by: Sasha Levin commit f6432d6d3e030b31957980b220e8114bff850943 Author: Geert Uytterhoeven Date: Mon Feb 11 13:58:43 2019 +0100 sh: sh7786: Add explicit I/O cast to sh7786_mm_sel() [ Upstream commit 8440bb9b944c02222c7a840d406141ed42e945cd ] When compile-testing on arm: arch/sh/include/cpu-sh4/cpu/sh7786.h: In function ‘sh7786_mm_sel’: arch/sh/include/cpu-sh4/cpu/sh7786.h:135:21: warning: passing argument 1 of ‘__raw_readl’ makes pointer from integer without a cast [-Wint-conversion] return __raw_readl(0xFC400020) & 0x7; ^~~~~~~~~~ In file included from include/linux/io.h:25:0, from arch/sh/include/cpu-sh4/cpu/sh7786.h:14, from drivers/pinctrl/sh-pfc/pfc-sh7786.c:15: arch/arm/include/asm/io.h:113:21: note: expected ‘const volatile void *’ but argument is of type ‘unsigned int’ #define __raw_readl __raw_readl ^ arch/arm/include/asm/io.h:114:19: note: in expansion of macro ‘__raw_readl’ static inline u32 __raw_readl(const volatile void __iomem *addr) ^~~~~~~~~~~ __raw_readl() on SuperH is a macro that casts the passed I/O address to the correct type, while the implementations on most other architectures expect to be passed the correct pointer type. Add an explicit cast to fix this. Note that this also gets rid of a sparse warning on SuperH: arch/sh/include/cpu-sh4/cpu/sh7786.h:135:16: warning: incorrect type in argument 1 (different base types) arch/sh/include/cpu-sh4/cpu/sh7786.h:135:16: expected void const volatile [noderef] * arch/sh/include/cpu-sh4/cpu/sh7786.h:135:16: got unsigned int Signed-off-by: Geert Uytterhoeven Reviewed-by: Simon Horman Signed-off-by: Sasha Levin commit 476e30ef6d5025eceebd4aa6d56f6591942e786a Author: Leon Romanovsky Date: Tue Mar 19 11:10:08 2019 +0200 RDMA/hns: Fix bad endianess of port_pd variable [ Upstream commit 6734b2973565e36659e97e12ab0d0faf1d9f3fbe ] port_pd is treated as le32 in declaration and read, fix assignment to be in le32 too. This change fixes the following compilation warnings. drivers/infiniband/hw/hns/hns_roce_ah.c:67:24: warning: incorrect type in assignment (different base types) drivers/infiniband/hw/hns/hns_roce_ah.c:67:24: expected restricted __le32 [usertype] port_pd drivers/infiniband/hw/hns/hns_roce_ah.c:67:24: got restricted __be32 [usertype] Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver") Signed-off-by: Leon Romanovsky Reviewed-by: Gal Pressman Reviewed-by: Lijun Ou Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin commit d682ebd67d88b3c8c9ee7b3235f7c964009653c4 Author: Chengguang Xu Date: Fri Feb 15 20:27:11 2019 +0800 chardev: add additional check for minor range overlap [ Upstream commit de36e16d1557a0b6eb328bc3516359a12ba5c25c ] Current overlap checking cannot correctly handle a case which is baseminor < existing baseminor && baseminor + minorct > existing baseminor + minorct. Signed-off-by: Chengguang Xu Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 8a68dfa400bc3e0d690a0338166a7cad508397d0 Author: Peter Zijlstra Date: Wed Apr 3 09:39:45 2019 +0200 x86/uaccess: Fix up the fixup [ Upstream commit b69656fa7ea2f75e47d7bd5b9430359fa46488af ] New tooling got confused about this: arch/x86/lib/memcpy_64.o: warning: objtool: .fixup+0x7: return with UACCESS enabled While the code isn't wrong, it is tedious (if at all possible) to figure out what function a particular chunk of .fixup belongs to. This then confuses the objtool uaccess validation. Instead of returning directly from the .fixup, jump back into the right function. Signed-off-by: Peter Zijlstra (Intel) Cc: Borislav Petkov Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin commit 282364641dae45d94eb0b18cd9bd01a32655b1a3 Author: Peter Zijlstra Date: Mon Feb 25 12:56:35 2019 +0100 x86/ia32: Fix ia32_restore_sigcontext() AC leak [ Upstream commit 67a0514afdbb8b2fc70b771b8c77661a9cb9d3a9 ] Objtool spotted that we call native_load_gs_index() with AC set. Re-arrange the code to avoid that. Signed-off-by: Peter Zijlstra (Intel) Cc: Borislav Petkov Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin commit eed3d71127fb3168432c1921841e84a699fa0a8f Author: Peter Zijlstra Date: Wed Apr 3 09:39:48 2019 +0200 x86/uaccess, signal: Fix AC=1 bloat [ Upstream commit 88e4718275c1bddca6f61f300688b4553dc8584b ] Occasionally GCC is less agressive with inlining and the following is observed: arch/x86/kernel/signal.o: warning: objtool: restore_sigcontext()+0x3cc: call to force_valid_ss.isra.5() with UACCESS enabled arch/x86/kernel/signal.o: warning: objtool: do_signal()+0x384: call to frame_uc_flags.isra.0() with UACCESS enabled Cure this by moving this code out of the AC=1 region, since it really isn't needed for the user access. Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Andy Lutomirski Cc: Borislav Petkov Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin commit 6b025e2831321ce649b2e06600747c80470854f5 Author: Peter Zijlstra Date: Thu Mar 7 11:09:13 2019 +0100 x86/uaccess, ftrace: Fix ftrace_likely_update() vs. SMAP [ Upstream commit 4a6c91fbdef846ec7250b82f2eeeb87ac5f18cf9 ] For CONFIG_TRACE_BRANCH_PROFILING=y the likely/unlikely things get overloaded and generate callouts to this code, and thus also when AC=1. Make it safe. Signed-off-by: Peter Zijlstra (Intel) Cc: Borislav Petkov Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Steven Rostedt Cc: Thomas Gleixner Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin commit 8dbae96a237f143909e2e6997f3a9b7d812a3c31 Author: Lior David Date: Thu Feb 28 11:35:01 2019 +0200 wil6210: fix return code of wmi_mgmt_tx and wmi_mgmt_tx_ext [ Upstream commit 49122ec42634f73babb1dc96f170023e5228d080 ] The functions that send management TX frame have 3 possible results: success and other side acknowledged receive (ACK=1), success and other side did not acknowledge receive(ACK=0) and failure to send the frame. The current implementation incorrectly reports the ACK=0 case as failure. Signed-off-by: Lior David Signed-off-by: Maya Erez Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin commit b5e52d5b82da0be1ba00cb91111b1db95744117b Author: Peter Zijlstra Date: Tue Mar 19 13:18:56 2019 +0100 locking/static_key: Fix false positive warnings on concurrent dec/inc [ Upstream commit a1247d06d01045d7ab2882a9c074fbf21137c690 ] Even though the atomic_dec_and_mutex_lock() in __static_key_slow_dec_cpuslocked() can never see a negative value in key->enabled the subsequent sanity check is re-reading key->enabled, which may have been set to -1 in the meantime by static_key_slow_inc_cpuslocked(). CPU A CPU B __static_key_slow_dec_cpuslocked(): static_key_slow_inc_cpuslocked(): # enabled = 1 atomic_dec_and_mutex_lock() # enabled = 0 atomic_read() == 0 atomic_set(-1) # enabled = -1 val = atomic_read() # Oops - val == -1! The test case is TCP's clean_acked_data_enable() / clean_acked_data_disable() as tickled by KTLS (net/ktls). Suggested-by: Jakub Kicinski Reported-by: Jakub Kicinski Tested-by: Jakub Kicinski Signed-off-by: Peter Zijlstra (Intel) Cc: Andrew Morton Cc: Linus Torvalds Cc: Paul E. McKenney Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Will Deacon Cc: ard.biesheuvel@linaro.org Cc: oss-drivers@netronome.com Cc: pbonzini@redhat.com Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin commit 685f8804590f74aa1d7008e662c397e4b41c4003 Author: Wen Yang Date: Tue Mar 5 19:34:05 2019 +0800 arm64: cpu_ops: fix a leaked reference by adding missing of_node_put [ Upstream commit 92606ec9285fb84cd9b5943df23f07d741384bfc ] The call to of_get_next_child returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./arch/arm64/kernel/cpu_ops.c:102:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 69, but without a corresponding object release within this function. Signed-off-by: Wen Yang Reviewed-by: Florian Fainelli Cc: Catalin Marinas Cc: Will Deacon Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Will Deacon Signed-off-by: Sasha Levin commit 244c8859b32b3b84b79fc3846c995a157b61d15b Author: Nicholas Kazlauskas Date: Mon Mar 11 10:33:35 2019 -0400 drm/amd/display: Prevent cursor hotspot overflow for RV overlay planes [ Upstream commit 6752bea8b03e77c98be7d8d25b0a9d86a00b3cf7 ] [Why] The actual position for the cursor on the screen is essentially: x_out = x - x_plane - x_hotspot y_out = y - y_plane - y_hotspot The register values for cursor position and cursor hotspot need to be greater than zero when programmed, but we also need to subtract off the plane position to display the cursor at the correct position. Since we don't want x or y to be less than zero, we add the plane position as a positive value to x_hotspot or y_hotspot. However, what this doesn't take into account is that the hotspot registers are limited by the maximum cursor size. On DCN10 the cursor hotspot regitsers are masked to 0xFF, so they have a maximum value of 0-255. Values greater this will wrap, causing the cursor to display in the wrong position. In practice this means that for sufficiently large plane positions, the cursor will be drawn twice on the screen, and can cause screen flashes or p-state WARNS depending on what the wrapped value is. So we need a way to remove the value from x_plane and y_plane without exceeding the maximum cursor size. [How] Subtract as much as x_plane/y_plane as possible from x and y and place the remainder in the cursor hotspot register. The value for x_hotspot and y_hotspot can still wrap around but it won't happen in a case where the cursor is actually enabled. The cursor plane needs to intersect at least one pixel of the plane's rectangle to be enabled, so the cursor position + hotspot provided by userspace must always be strictly less than the maximum cursor size for the cursor to actually be enabled. Signed-off-by: Nicholas Kazlauskas Reviewed-by: Sun peng Li Acked-by: Bhawanpreet Lakha Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit 12240cd07528a1b97ab6db611f5da6f8f7dea03e Author: Yannick Fertré Date: Thu Mar 21 09:04:05 2019 +0100 drm/panel: otm8009a: Add delay at the end of initialization [ Upstream commit 0084c3c71126fc878c6dab8a6ab8ecc484c2be02 ] At the end of initialization, a delay is required by the panel. Without this delay, the panel could received a frame early & generate a crash of panel (black screen). Signed-off-by: Yannick Fertré Reviewed-by: Philippe Cornu Tested-by: Philippe Cornu Signed-off-by: Thierry Reding Link: https://patchwork.freedesktop.org/patch/msgid/1553155445-13407-1-git-send-email-yannick.fertre@st.com Signed-off-by: Sasha Levin commit 6f6995a70e032a24cfdcb86b4515f5661a4b0bb6 Author: Stanley Chu Date: Thu Mar 28 17:16:24 2019 +0800 scsi: ufs: Avoid configuring regulator with undefined voltage range [ Upstream commit 3b141e8cfd54ba3e5c610717295b2a02aab26a05 ] For regulators used by UFS, vcc, vccq and vccq2 will have voltage range initialized by ufshcd_populate_vreg(), however other regulators may have undefined voltage range if dt-bindings have no such definition. In above undefined case, both "min_uV" and "max_uV" fields in ufs_vreg struct will be zero values and these values will be configured on regulators in different power modes. Currently this may have no harm if both "min_uV" and "max_uV" always keep "zero values" because regulator_set_voltage() will always bypass such invalid values and return "good" results. However improper values shall be fixed to avoid potential bugs. Simply bypass voltage configuration if voltage range is not defined. Signed-off-by: Stanley Chu Reviewed-by: Avri Altman Acked-by: Alim Akhtar Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 93ea3caaf49c43954686197e5d23547880c2feaa Author: Stanley Chu Date: Thu Mar 28 17:16:25 2019 +0800 scsi: ufs: Fix regulator load and icc-level configuration [ Upstream commit 0487fff76632ec023d394a05b82e87a971db8c03 ] Currently if a regulator has "-fixed-regulator" property in device tree, it will skip current limit initialization. This lead to a zero "max_uA" value in struct ufs_vreg. However, "regulator_set_load" operation shall be required on regulators which have valid current limits, otherwise a zero "max_uA" set by "regulator_set_load" may cause unexpected behavior when this regulator is enabled or set as high power mode. Similarly, in device's icc_level configuration flow, the target icc_level shall be updated if regulator also has valid current limit, otherwise a wrong icc_level will be calculated by zero "max_uA" and thus causes unexpected results after it is written to device. Signed-off-by: Stanley Chu Reviewed-by: Avri Altman Acked-by: Alim Akhtar Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 257002003291f0dc959fcec70a0674020d9f019b Author: Ping-Ke Shih Date: Tue Mar 12 17:06:48 2019 +0800 rtlwifi: fix potential NULL pointer dereference [ Upstream commit 60209d482b97743915883d293c8b85226d230c19 ] In case dev_alloc_skb fails, the fix safely returns to avoid potential NULL pointer dereference. Signed-off-by: Ping-Ke Shih Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin commit afbc04c3e1daa14ab1beb9e896cd77e7f5693c63 Author: Alexandre Belloni Date: Wed Mar 20 13:32:27 2019 +0100 rtc: xgene: fix possible race condition [ Upstream commit a652e00ee1233e251a337c28e18a1da59224e5ce ] The IRQ is requested before the struct rtc is allocated and registered, but this struct is used in the IRQ handler. This may lead to a NULL pointer dereference. Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc struct before requesting the IRQ. Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin commit 306e799b6d9e8f286e9e19f83f68c3144f5e2fde Author: Piotr Figiel Date: Wed Mar 13 09:52:01 2019 +0000 brcmfmac: fix Oops when bringing up interface during USB disconnect [ Upstream commit 24d413a31afaee9bbbf79226052c386b01780ce2 ] Fix a race which leads to an Oops with NULL pointer dereference. The dereference is in brcmf_config_dongle() when cfg_to_ndev() attempts to get net_device structure of interface with index 0 via if2bss mapping. This shouldn't fail because of check for bus being ready in brcmf_netdev_open(), but it's not synchronised with USB disconnect and there is a race: after the check the bus can be marked down and the mapping for interface 0 may be gone. Solve this by modifying disconnect handling so that the removal of mapping of ifidx to brcmf_if structure happens after netdev removal (which is synchronous with brcmf_netdev_open() thanks to rtln being locked in devinet_ioctl()). This assures brcmf_netdev_open() returns before the mapping is removed during disconnect. Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = bcae2612 [00000008] *pgd=8be73831 Internal error: Oops: 17 [#1] PREEMPT SMP ARM Modules linked in: brcmfmac brcmutil nf_log_ipv4 nf_log_common xt_LOG xt_limit iptable_mangle xt_connmark xt_tcpudp xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter ip_tables x_tables usb_f_mass_storage usb_f_rndis u_ether usb_serial_simple usbserial cdc_acm smsc95xx usbnet ci_hdrc_imx ci_hdrc usbmisc_imx ulpi 8250_exar 8250_pci 8250 8250_base libcomposite configfs udc_core [last unloaded: brcmutil] CPU: 2 PID: 24478 Comm: ifconfig Not tainted 4.19.23-00078-ga62866d-dirty #115 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) PC is at brcmf_cfg80211_up+0x94/0x29c [brcmfmac] LR is at brcmf_cfg80211_up+0x8c/0x29c [brcmfmac] pc : [<7f26a91c>] lr : [<7f26a914>] psr: a0070013 sp : eca99d28 ip : 00000000 fp : ee9c6c00 r10: 00000036 r9 : 00000000 r8 : ece4002c r7 : edb5b800 r6 : 00000000 r5 : 80f08448 r4 : edb5b968 r3 : ffffffff r2 : 00000000 r1 : 00000002 r0 : 00000000 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 7ca0c04a DAC: 00000051 Process ifconfig (pid: 24478, stack limit = 0xd9e85a0e) Stack: (0xeca99d28 to 0xeca9a000) 9d20: 00000000 80f873b0 0000000d 80f08448 eca99d68 50d45f32 9d40: 7f27de94 ece40000 80f08448 80f08448 7f27de94 ece4002c 00000000 00000036 9d60: ee9c6c00 7f27262c 00001002 50d45f32 ece40000 00000000 80f08448 80772008 9d80: 00000001 00001043 00001002 ece40000 00000000 50d45f32 ece40000 00000001 9da0: 80f08448 00001043 00001002 807723d0 00000000 50d45f32 80f08448 eca99e58 9dc0: 80f87113 50d45f32 80f08448 ece40000 ece40138 00001002 80f08448 00000000 9de0: 00000000 80772434 edbd5380 eca99e58 edbd5380 80f08448 ee9c6c0c 80805f70 9e00: 00000000 ede08e00 00008914 ece40000 00000014 ee9c6c0c 600c0013 00001043 9e20: 0208a8c0 ffffffff 00000000 50d45f32 eca98000 80f08448 7ee9fc38 00008914 9e40: 80f68e40 00000051 eca98000 00000036 00000003 80808b9c 6e616c77 00000030 9e60: 00000000 00000000 00001043 0208a8c0 ffffffff 00000000 80f08448 00000000 9e80: 00000000 816d8b20 600c0013 00000001 ede09320 801763d4 00000000 50d45f32 9ea0: eca98000 80f08448 7ee9fc38 50d45f32 00008914 80f08448 7ee9fc38 80f68e40 9ec0: ed531540 8074721c 00000800 00000001 00000000 6e616c77 00000030 00000000 9ee0: 00000000 00001002 0208a8c0 ffffffff 00000000 50d45f32 80f08448 7ee9fc38 9f00: ed531560 ec8fc900 80285a6c 80285138 edb910c0 00000000 ecd91008 ede08e00 9f20: 80f08448 00000000 00000000 816d8b20 600c0013 00000001 ede09320 801763d4 9f40: 00000000 50d45f32 00021000 edb91118 edb910c0 80f08448 01b29000 edb91118 9f60: eca99f7c 50d45f32 00021000 ec8fc900 00000003 ec8fc900 00008914 7ee9fc38 9f80: eca98000 00000036 00000003 80285a6c 00086364 7ee9fe1c 000000c3 00000036 9fa0: 801011c4 80101000 00086364 7ee9fe1c 00000003 00008914 7ee9fc38 00086364 9fc0: 00086364 7ee9fe1c 000000c3 00000036 0008630c 7ee9fe1c 7ee9fc38 00000003 9fe0: 000a42b8 7ee9fbd4 00019914 76e09acc 600c0010 00000003 00000000 00000000 [<7f26a91c>] (brcmf_cfg80211_up [brcmfmac]) from [<7f27262c>] (brcmf_netdev_open+0x74/0xe8 [brcmfmac]) [<7f27262c>] (brcmf_netdev_open [brcmfmac]) from [<80772008>] (__dev_open+0xcc/0x150) [<80772008>] (__dev_open) from [<807723d0>] (__dev_change_flags+0x168/0x1b4) [<807723d0>] (__dev_change_flags) from [<80772434>] (dev_change_flags+0x18/0x48) [<80772434>] (dev_change_flags) from [<80805f70>] (devinet_ioctl+0x67c/0x79c) [<80805f70>] (devinet_ioctl) from [<80808b9c>] (inet_ioctl+0x210/0x3d4) [<80808b9c>] (inet_ioctl) from [<8074721c>] (sock_ioctl+0x350/0x524) [<8074721c>] (sock_ioctl) from [<80285138>] (do_vfs_ioctl+0xb0/0x9b0) [<80285138>] (do_vfs_ioctl) from [<80285a6c>] (ksys_ioctl+0x34/0x5c) [<80285a6c>] (ksys_ioctl) from [<80101000>] (ret_fast_syscall+0x0/0x28) Exception stack(0xeca99fa8 to 0xeca99ff0) 9fa0: 00086364 7ee9fe1c 00000003 00008914 7ee9fc38 00086364 9fc0: 00086364 7ee9fe1c 000000c3 00000036 0008630c 7ee9fe1c 7ee9fc38 00000003 9fe0: 000a42b8 7ee9fbd4 00019914 76e09acc Code: e5970328 eb002021 e1a02006 e3a01002 (e5909008) ---[ end trace 5cbac2333f3ac5df ]--- Signed-off-by: Piotr Figiel Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin commit d0b552ad0ad3744231e664553aa7212895e17b89 Author: Piotr Figiel Date: Fri Mar 8 15:25:04 2019 +0000 brcmfmac: fix race during disconnect when USB completion is in progress [ Upstream commit db3b9e2e1d58080d0754bdf9293dabf8c6491b67 ] It was observed that rarely during USB disconnect happening shortly after connect (before full initialization completes) usb_hub_wq would wait forever for the dev_init_lock to be unlocked. dev_init_lock would remain locked though because of infinite wait during usb_kill_urb: [ 2730.656472] kworker/0:2 D 0 260 2 0x00000000 [ 2730.660700] Workqueue: events request_firmware_work_func [ 2730.664807] [<809dca20>] (__schedule) from [<809dd164>] (schedule+0x4c/0xac) [ 2730.670587] [<809dd164>] (schedule) from [<8069af44>] (usb_kill_urb+0xdc/0x114) [ 2730.676815] [<8069af44>] (usb_kill_urb) from [<7f258b50>] (brcmf_usb_free_q+0x34/0xa8 [brcmfmac]) [ 2730.684833] [<7f258b50>] (brcmf_usb_free_q [brcmfmac]) from [<7f2517d4>] (brcmf_detach+0xa0/0xb8 [brcmfmac]) [ 2730.693557] [<7f2517d4>] (brcmf_detach [brcmfmac]) from [<7f251a34>] (brcmf_attach+0xac/0x3d8 [brcmfmac]) [ 2730.702094] [<7f251a34>] (brcmf_attach [brcmfmac]) from [<7f2587ac>] (brcmf_usb_probe_phase2+0x468/0x4a0 [brcmfmac]) [ 2730.711601] [<7f2587ac>] (brcmf_usb_probe_phase2 [brcmfmac]) from [<7f252888>] (brcmf_fw_request_done+0x194/0x220 [brcmfmac]) [ 2730.721795] [<7f252888>] (brcmf_fw_request_done [brcmfmac]) from [<805748e4>] (request_firmware_work_func+0x4c/0x88) [ 2730.731125] [<805748e4>] (request_firmware_work_func) from [<80141474>] (process_one_work+0x228/0x808) [ 2730.739223] [<80141474>] (process_one_work) from [<80141a80>] (worker_thread+0x2c/0x564) [ 2730.746105] [<80141a80>] (worker_thread) from [<80147bcc>] (kthread+0x13c/0x16c) [ 2730.752227] [<80147bcc>] (kthread) from [<801010b4>] (ret_from_fork+0x14/0x20) [ 2733.099695] kworker/0:3 D 0 1065 2 0x00000000 [ 2733.103926] Workqueue: usb_hub_wq hub_event [ 2733.106914] [<809dca20>] (__schedule) from [<809dd164>] (schedule+0x4c/0xac) [ 2733.112693] [<809dd164>] (schedule) from [<809e2a8c>] (schedule_timeout+0x214/0x3e4) [ 2733.119621] [<809e2a8c>] (schedule_timeout) from [<809dde2c>] (wait_for_common+0xc4/0x1c0) [ 2733.126810] [<809dde2c>] (wait_for_common) from [<7f258d00>] (brcmf_usb_disconnect+0x1c/0x4c [brcmfmac]) [ 2733.135206] [<7f258d00>] (brcmf_usb_disconnect [brcmfmac]) from [<8069e0c8>] (usb_unbind_interface+0x5c/0x1e4) [ 2733.143943] [<8069e0c8>] (usb_unbind_interface) from [<8056d3e8>] (device_release_driver_internal+0x164/0x1fc) [ 2733.152769] [<8056d3e8>] (device_release_driver_internal) from [<8056c078>] (bus_remove_device+0xd0/0xfc) [ 2733.161138] [<8056c078>] (bus_remove_device) from [<8056977c>] (device_del+0x11c/0x310) [ 2733.167939] [<8056977c>] (device_del) from [<8069cba8>] (usb_disable_device+0xa0/0x1cc) [ 2733.174743] [<8069cba8>] (usb_disable_device) from [<8069507c>] (usb_disconnect+0x74/0x1dc) [ 2733.181823] [<8069507c>] (usb_disconnect) from [<80695e88>] (hub_event+0x478/0xf88) [ 2733.188278] [<80695e88>] (hub_event) from [<80141474>] (process_one_work+0x228/0x808) [ 2733.194905] [<80141474>] (process_one_work) from [<80141a80>] (worker_thread+0x2c/0x564) [ 2733.201724] [<80141a80>] (worker_thread) from [<80147bcc>] (kthread+0x13c/0x16c) [ 2733.207913] [<80147bcc>] (kthread) from [<801010b4>] (ret_from_fork+0x14/0x20) It was traced down to a case where usb_kill_urb would be called on an URB structure containing more or less random data, including large number in its use_count. During the debugging it appeared that in brcmf_usb_free_q() the traversal over URBs' lists is not synchronized with operations on those lists in brcmf_usb_rx_complete() leading to handling brcmf_usbdev_info structure (holding lists' head) as lists' element and in result causing above problem. Fix it by walking through all URBs during brcmf_cancel_all_urbs using the arrays of requests instead of linked lists. Signed-off-by: Piotr Figiel Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin commit 8116fb7f8c8133eb7bc83a20082a10a1e8e962f3 Author: Piotr Figiel Date: Mon Mar 4 15:42:49 2019 +0000 brcmfmac: fix WARNING during USB disconnect in case of unempty psq [ Upstream commit c80d26e81ef1802f30364b4ad1955c1443a592b9 ] brcmu_pkt_buf_free_skb emits WARNING when attempting to free a sk_buff which is part of any queue. After USB disconnect this may have happened when brcmf_fws_hanger_cleanup() is called as per-interface psq was never cleaned when removing the interface. Change brcmf_fws_macdesc_cleanup() in a way that it removes the corresponding packets from hanger table (to avoid double-free when brcmf_fws_hanger_cleanup() is called) and add a call to clean-up the interface specific packet queue. Below is a WARNING during USB disconnect with Raspberry Pi WiFi dongle running in AP mode. This was reproducible when the interface was transmitting during the disconnect and is fixed with this commit. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1171 at drivers/net/wireless/broadcom/brcm80211/brcmutil/utils.c:49 brcmu_pkt_buf_free_skb+0x3c/0x40 Modules linked in: nf_log_ipv4 nf_log_common xt_LOG xt_limit iptable_mangle xt_connmark xt_tcpudp xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter ip_tables x_tables usb_f_mass_storage usb_f_rndis u_ether cdc_acm smsc95xx usbnet ci_hdrc_imx ci_hdrc ulpi usbmisc_imx 8250_exar 8250_pci 8250 8250_base libcomposite configfs udc_core CPU: 0 PID: 1171 Comm: kworker/0:0 Not tainted 4.19.23-00075-gde33ed8 #99 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Workqueue: usb_hub_wq hub_event [<8010ff84>] (unwind_backtrace) from [<8010bb64>] (show_stack+0x10/0x14) [<8010bb64>] (show_stack) from [<80840278>] (dump_stack+0x88/0x9c) [<80840278>] (dump_stack) from [<8011f5ec>] (__warn+0xfc/0x114) [<8011f5ec>] (__warn) from [<8011f71c>] (warn_slowpath_null+0x40/0x48) [<8011f71c>] (warn_slowpath_null) from [<805a476c>] (brcmu_pkt_buf_free_skb+0x3c/0x40) [<805a476c>] (brcmu_pkt_buf_free_skb) from [<805bb6c4>] (brcmf_fws_cleanup+0x1e4/0x22c) [<805bb6c4>] (brcmf_fws_cleanup) from [<805bc854>] (brcmf_fws_del_interface+0x58/0x68) [<805bc854>] (brcmf_fws_del_interface) from [<805b66ac>] (brcmf_remove_interface+0x40/0x150) [<805b66ac>] (brcmf_remove_interface) from [<805b6870>] (brcmf_detach+0x6c/0xb0) [<805b6870>] (brcmf_detach) from [<805bdbb8>] (brcmf_usb_disconnect+0x30/0x4c) [<805bdbb8>] (brcmf_usb_disconnect) from [<805e5d64>] (usb_unbind_interface+0x5c/0x1e0) [<805e5d64>] (usb_unbind_interface) from [<804aab10>] (device_release_driver_internal+0x154/0x1ec) [<804aab10>] (device_release_driver_internal) from [<804a97f4>] (bus_remove_device+0xcc/0xf8) [<804a97f4>] (bus_remove_device) from [<804a6fc0>] (device_del+0x118/0x308) [<804a6fc0>] (device_del) from [<805e488c>] (usb_disable_device+0xa0/0x1c8) [<805e488c>] (usb_disable_device) from [<805dcf98>] (usb_disconnect+0x70/0x1d8) [<805dcf98>] (usb_disconnect) from [<805ddd84>] (hub_event+0x464/0xf50) [<805ddd84>] (hub_event) from [<80135a70>] (process_one_work+0x138/0x3f8) [<80135a70>] (process_one_work) from [<80135d5c>] (worker_thread+0x2c/0x554) [<80135d5c>] (worker_thread) from [<8013b1a0>] (kthread+0x124/0x154) [<8013b1a0>] (kthread) from [<801010e8>] (ret_from_fork+0x14/0x2c) Exception stack(0xecf8dfb0 to 0xecf8dff8) dfa0: 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ---[ end trace 38d234018e9e2a90 ]--- ------------[ cut here ]------------ Signed-off-by: Piotr Figiel Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin commit 4eec2427daaa86f7de36660dc57fd86082194a10 Author: Piotr Figiel Date: Wed Mar 13 09:52:42 2019 +0000 brcmfmac: convert dev_init_lock mutex to completion [ Upstream commit a9fd0953fa4a62887306be28641b4b0809f3b2fd ] Leaving dev_init_lock mutex locked in probe causes BUG and a WARNING when kernel is compiled with CONFIG_PROVE_LOCKING. Convert mutex to completion which silences those warnings and improves code readability. Fix below errors when connecting the USB WiFi dongle: brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43143 for chip BCM43143/2 BUG: workqueue leaked lock or atomic: kworker/0:2/0x00000000/434 last function: hub_event 1 lock held by kworker/0:2/434: #0: 18d5dcdf (&devinfo->dev_init_lock){+.+.}, at: brcmf_usb_probe+0x78/0x550 [brcmfmac] CPU: 0 PID: 434 Comm: kworker/0:2 Not tainted 4.19.23-00084-g454a789-dirty #123 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Workqueue: usb_hub_wq hub_event [<8011237c>] (unwind_backtrace) from [<8010d74c>] (show_stack+0x10/0x14) [<8010d74c>] (show_stack) from [<809c4324>] (dump_stack+0xa8/0xd4) [<809c4324>] (dump_stack) from [<8014195c>] (process_one_work+0x710/0x808) [<8014195c>] (process_one_work) from [<80141a80>] (worker_thread+0x2c/0x564) [<80141a80>] (worker_thread) from [<80147bcc>] (kthread+0x13c/0x16c) [<80147bcc>] (kthread) from [<801010b4>] (ret_from_fork+0x14/0x20) Exception stack(0xed1d9fb0 to 0xed1d9ff8) 9fa0: 00000000 00000000 00000000 00000000 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ====================================================== WARNING: possible circular locking dependency detected 4.19.23-00084-g454a789-dirty #123 Not tainted ------------------------------------------------------ kworker/0:2/434 is trying to acquire lock: e29cf799 ((wq_completion)"events"){+.+.}, at: process_one_work+0x174/0x808 but task is already holding lock: 18d5dcdf (&devinfo->dev_init_lock){+.+.}, at: brcmf_usb_probe+0x78/0x550 [brcmfmac] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&devinfo->dev_init_lock){+.+.}: mutex_lock_nested+0x1c/0x24 brcmf_usb_probe+0x78/0x550 [brcmfmac] usb_probe_interface+0xc0/0x1bc really_probe+0x228/0x2c0 __driver_attach+0xe4/0xe8 bus_for_each_dev+0x68/0xb4 bus_add_driver+0x19c/0x214 driver_register+0x78/0x110 usb_register_driver+0x84/0x148 process_one_work+0x228/0x808 worker_thread+0x2c/0x564 kthread+0x13c/0x16c ret_from_fork+0x14/0x20 (null) -> #1 (brcmf_driver_work){+.+.}: worker_thread+0x2c/0x564 kthread+0x13c/0x16c ret_from_fork+0x14/0x20 (null) -> #0 ((wq_completion)"events"){+.+.}: process_one_work+0x1b8/0x808 worker_thread+0x2c/0x564 kthread+0x13c/0x16c ret_from_fork+0x14/0x20 (null) other info that might help us debug this: Chain exists of: (wq_completion)"events" --> brcmf_driver_work --> &devinfo->dev_init_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&devinfo->dev_init_lock); lock(brcmf_driver_work); lock(&devinfo->dev_init_lock); lock((wq_completion)"events"); *** DEADLOCK *** 1 lock held by kworker/0:2/434: #0: 18d5dcdf (&devinfo->dev_init_lock){+.+.}, at: brcmf_usb_probe+0x78/0x550 [brcmfmac] stack backtrace: CPU: 0 PID: 434 Comm: kworker/0:2 Not tainted 4.19.23-00084-g454a789-dirty #123 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Workqueue: events request_firmware_work_func [<8011237c>] (unwind_backtrace) from [<8010d74c>] (show_stack+0x10/0x14) [<8010d74c>] (show_stack) from [<809c4324>] (dump_stack+0xa8/0xd4) [<809c4324>] (dump_stack) from [<80172838>] (print_circular_bug+0x210/0x330) [<80172838>] (print_circular_bug) from [<80175940>] (__lock_acquire+0x160c/0x1a30) [<80175940>] (__lock_acquire) from [<8017671c>] (lock_acquire+0xe0/0x268) [<8017671c>] (lock_acquire) from [<80141404>] (process_one_work+0x1b8/0x808) [<80141404>] (process_one_work) from [<80141a80>] (worker_thread+0x2c/0x564) [<80141a80>] (worker_thread) from [<80147bcc>] (kthread+0x13c/0x16c) [<80147bcc>] (kthread) from [<801010b4>] (ret_from_fork+0x14/0x20) Exception stack(0xed1d9fb0 to 0xed1d9ff8) 9fa0: 00000000 00000000 00000000 00000000 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Signed-off-by: Piotr Figiel Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin commit 3fb9b1b0a0fabc31f90c15a3f61d5d91e28227dc Author: Arnd Bergmann Date: Fri Mar 22 15:37:02 2019 +0100 b43: shut up clang -Wuninitialized variable warning [ Upstream commit d825db346270dbceef83b7b750dbc29f1d7dcc0e ] Clang warns about what is clearly a case of passing an uninitalized variable into a static function: drivers/net/wireless/broadcom/b43/phy_lp.c:1852:23: error: variable 'gains' is uninitialized when used here [-Werror,-Wuninitialized] lpphy_papd_cal(dev, gains, 0, 1, 30); ^~~~~ drivers/net/wireless/broadcom/b43/phy_lp.c:1838:2: note: variable 'gains' is declared here struct lpphy_tx_gains gains, oldgains; ^ 1 error generated. However, this function is empty, and its arguments are never evaluated, so gcc in contrast does not warn here. Both compilers behave in a reasonable way as far as I can tell, so we should change the code to avoid the warning everywhere. We could just eliminate the lpphy_papd_cal() function entirely, given that it has had the TODO comment in it for 10 years now and is rather unlikely to ever get done. I'm doing a simpler change here, and just pass the 'oldgains' variable in that has been initialized, based on the guess that this is what was originally meant. Fixes: 2c0d6100da3e ("b43: LP-PHY: Begin implementing calibration & software RFKILL support") Signed-off-by: Arnd Bergmann Acked-by: Larry Finger Reviewed-by: Nathan Chancellor Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin commit e8e75263fa4e8c4577ccfdcc420e12b7da85fd74 Author: Kangjie Lu Date: Fri Mar 15 12:04:32 2019 -0500 brcmfmac: fix missing checks for kmemdup [ Upstream commit 46953f97224d56a12ccbe9c6acaa84ca0dab2780 ] In case kmemdup fails, the fix sets conn_info->req_ie_len and conn_info->resp_ie_len to zero to avoid buffer overflows. Signed-off-by: Kangjie Lu Acked-by: Arend van Spriel Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin commit 741d25eaa6c5786a4f6a842ea5da140a3eb8cf46 Author: YueHaibing Date: Tue Mar 12 15:03:58 2019 +0800 mwifiex: Fix mem leak in mwifiex_tm_cmd [ Upstream commit 003b686ace820ce2d635a83f10f2d7f9c147dabc ] 'hostcmd' is alloced by kzalloc, should be freed before leaving from the error handling cases, otherwise it will cause mem leak. Fixes: 3935ccc14d2c ("mwifiex: add cfg80211 testmode support") Signed-off-by: YueHaibing Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin commit afef821f106fc89a90d69246b7b1714b99a277f3 Author: Kangjie Lu Date: Tue Mar 12 02:56:33 2019 -0500 rtlwifi: fix a potential NULL pointer dereference [ Upstream commit 765976285a8c8db3f0eb7f033829a899d0c2786e ] In case alloc_workqueue fails, the fix reports the error and returns to avoid NULL pointer dereference. Signed-off-by: Kangjie Lu Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin commit 016115d516c0e3cdd66563a86cca187e388fd677 Author: Daniel T. Lee Date: Thu Apr 4 07:17:55 2019 +0900 selftests/bpf: ksym_search won't check symbols exists [ Upstream commit 0979ff7992fb6f4eb837995b12f4071dcafebd2d ] Currently, ksym_search located at trace_helpers won't check symbols are existing or not. In ksym_search, when symbol is not found, it will return &syms[0](_stext). But when the kernel symbols are not loaded, it will return NULL, which is not a desired action. This commit will add verification logic whether symbols are loaded prior to the symbol search. Signed-off-by: Daniel T. Lee Signed-off-by: Daniel Borkmann Signed-off-by: Sasha Levin commit b6d75e4f89c054357d0b038868e87206c54a4824 Author: Jian Shen Date: Thu Apr 4 16:17:55 2019 +0800 net: hns3: add protect when handling mac addr list [ Upstream commit 389775a6605e040dddea21a778a88eaaa57c068d ] It used netdev->uc and netdev->mc list in function hns3_recover_hw_addr() and hns3_remove_hw_addr(). We should add protect for them. Fixes: f05e21097121 ("net: hns3: Clear mac vlan table entries when unload driver or function reset") Signed-off-by: Jian Shen Signed-off-by: Peng Li Signed-off-by: Huazhong Tan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit cee70979bd4c7ec0832b2f4cdd15385e78a791d4 Author: Huazhong Tan Date: Thu Apr 4 16:17:56 2019 +0800 net: hns3: check resetting status in hns3_get_stats() [ Upstream commit c4e401e5a934bb0798ebbba98e08dab129695eff ] hns3_get_stats() should check the resetting status firstly, since the device will be reinitialized when resetting. If the reset has not completed, the hns3_get_stats() may access invalid memory. Signed-off-by: Huazhong Tan Signed-off-by: Peng Li Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 6950a1e58100dd0e008db176dba716d867f87c6b Author: Justin Chen Date: Thu Feb 28 14:16:48 2019 -0800 iio: adc: ti-ads7950: Fix improper use of mlock [ Upstream commit abbde2792999c9ad3514dd25d7f8d9a96034fe16 ] Indio->mlock is used for protecting the different iio device modes. It is currently not being used in this way. Replace the lock with an internal lock specifically used for protecting the SPI transfer buffer. Signed-off-by: Justin Chen Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin commit 1c16c6e947fb446667ac1077322aa86c9d689cdb Author: Nathan Chancellor Date: Thu Mar 7 14:45:46 2019 -0700 iio: common: ssp_sensors: Initialize calculated_time in ssp_common_process_data [ Upstream commit 6f9ca1d3eb74b81f811a87002de2d51640d135b1 ] When building with -Wsometimes-uninitialized, Clang warns: drivers/iio/common/ssp_sensors/ssp_iio.c:95:6: warning: variable 'calculated_time' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] While it isn't wrong, this will never be a problem because iio_push_to_buffers_with_timestamp only uses calculated_time on the same condition that it is assigned (when scan_timestamp is not zero). While iio_push_to_buffers_with_timestamp is marked as inline, Clang does inlining in the optimization stage, which happens after the semantic analysis phase (plus inline is merely a hint to the compiler). Fix this by just zero initializing calculated_time. Link: https://github.com/ClangBuiltLinux/linux/issues/394 Signed-off-by: Nathan Chancellor Reviewed-by: Nick Desaulniers Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin commit 52e3ca03729511c3169f6a3a1ce992d0b49e4830 Author: Kangjie Lu Date: Sat Mar 16 17:08:33 2019 -0500 iio: hmc5843: fix potential NULL pointer dereferences [ Upstream commit 536cc27deade8f1ec3c1beefa60d5fbe0f6fcb28 ] devm_regmap_init_i2c may fail and return NULL. The fix returns the error when it fails. Signed-off-by: Kangjie Lu Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin commit d1ccaed43fd4f5d4cb5ad6db68a2683adf8009e9 Author: Lars-Peter Clausen Date: Tue Mar 19 13:37:55 2019 +0200 iio: ad_sigma_delta: Properly handle SPI bus locking vs CS assertion [ Upstream commit df1d80aee963480c5c2938c64ec0ac3e4a0df2e0 ] For devices from the SigmaDelta family we need to keep CS low when doing a conversion, since the device will use the MISO line as a interrupt to indicate that the conversion is complete. This is why the driver locks the SPI bus and when the SPI bus is locked keeps as long as a conversion is going on. The current implementation gets one small detail wrong though. CS is only de-asserted after the SPI bus is unlocked. This means it is possible for a different SPI device on the same bus to send a message which would be wrongfully be addressed to the SigmaDelta device as well. Make sure that the last SPI transfer that is done while holding the SPI bus lock de-asserts the CS signal. Signed-off-by: Lars-Peter Clausen Signed-off-by: Alexandru Ardelean Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin commit e345c0842680c6bc15f5a3e6eb107010ed362fa3 Author: Wen Yang Date: Thu Apr 4 00:04:13 2019 +0800 drm/pl111: fix possible object reference leak [ Upstream commit bc29d3a69d4c1bd1a103e8b3c1ed81b807c1870b ] The call to of_find_matching_node_and_match returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: drivers/gpu/drm/pl111/pl111_versatile.c:333:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. drivers/gpu/drm/pl111/pl111_versatile.c:340:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. drivers/gpu/drm/pl111/pl111_versatile.c:346:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. drivers/gpu/drm/pl111/pl111_versatile.c:354:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. drivers/gpu/drm/pl111/pl111_versatile.c:395:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. drivers/gpu/drm/pl111/pl111_versatile.c:402:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. Signed-off-by: Wen Yang Cc: Eric Anholt (supporter:DRM DRIVER FOR ARM PL111 CLCD) Cc: David Airlie (maintainer:DRM DRIVERS) Cc: Daniel Vetter (maintainer:DRM DRIVERS) Cc: dri-devel@lists.freedesktop.org (open list:DRM DRIVERS) Cc: linux-kernel@vger.kernel.org (open list) Signed-off-by: Eric Anholt Link: https://patchwork.freedesktop.org/patch/msgid/1554307455-40361-6-git-send-email-wen.yang99@zte.com.cn Signed-off-by: Sasha Levin commit 36e250cb89d0dc5ce2cad7c283c9b54aba2e37a0 Author: Charles Keepax Date: Thu Apr 4 16:32:18 2019 +0100 regulator: core: Avoid potential deadlock on regulator_unregister [ Upstream commit 063773011d33bb36588a90385aa9eb75d13c6d80 ] Lockdep reports the following issue on my setup: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((work_completion)(&(&rdev->disable_work)->work)); lock(regulator_list_mutex); lock((work_completion)(&(&rdev->disable_work)->work)); lock(regulator_list_mutex); The problem is that regulator_unregister takes the regulator_list_mutex and then calls flush_work on disable_work. But regulator_disable_work calls regulator_lock_dependent which will also take the regulator_list_mutex. Resulting in a deadlock if the flush_work call actually needs to flush the work. Fix this issue by moving the flush_work outside of the regulator_list_mutex. The list mutex is not used to guard the point at which the delayed work is queued, so its use adds no additional safety. Fixes: f8702f9e4aa7 ("regulator: core: Use ww_mutex for regulators locking") Signed-off-by: Charles Keepax Reviewed-by: Dmitry Osipenko Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 834782f986f3e0d2eeb537248838e921c1ea39ae Author: Kees Cook Date: Thu Apr 4 14:40:27 2019 -0700 x86/build: Keep local relocations with ld.lld [ Upstream commit 7c21383f3429dd70da39c0c7f1efa12377a47ab6 ] The LLVM linker (ld.lld) defaults to removing local relocations, which causes KASLR boot failures. ld.bfd and ld.gold already handle this correctly. This adds the explicit instruction "--discard-none" during the link phase. There is no change in output for ld.bfd and ld.gold, but ld.lld now produces an image with all the needed relocations. Signed-off-by: Kees Cook Signed-off-by: Borislav Petkov Cc: "H. Peter Anvin" Cc: Ingo Molnar Cc: Nick Desaulniers Cc: Thomas Gleixner Cc: clang-built-linux@googlegroups.com Cc: x86-ml Link: https://lkml.kernel.org/r/20190404214027.GA7324@beast Link: https://github.com/ClangBuiltLinux/linux/issues/404 Signed-off-by: Sasha Levin commit f1c52d5392a2fa10ef04029128949e51c2e0158e Author: Alexei Starovoitov Date: Thu Apr 4 14:37:14 2019 -0700 samples/bpf: fix build with new clang [ Upstream commit 636e78b1cdb40b77a79b143dbd9d94847b360efa ] clang started to error on invalid asm clobber usage in x86 headers and many bpf program samples failed to build with the message: CLANG-bpf /data/users/ast/bpf-next/samples/bpf/xdp_redirect_kern.o In file included from /data/users/ast/bpf-next/samples/bpf/xdp_redirect_kern.c:14: In file included from ../include/linux/in.h:23: In file included from ../include/uapi/linux/in.h:24: In file included from ../include/linux/socket.h:8: In file included from ../include/linux/uio.h:14: In file included from ../include/crypto/hash.h:16: In file included from ../include/linux/crypto.h:26: In file included from ../include/linux/uaccess.h:5: In file included from ../include/linux/sched.h:15: In file included from ../include/linux/sem.h:5: In file included from ../include/uapi/linux/sem.h:5: In file included from ../include/linux/ipc.h:9: In file included from ../include/linux/refcount.h:72: ../arch/x86/include/asm/refcount.h:72:36: error: asm-specifier for input or output variable conflicts with asm clobber list r->refs.counter, e, "er", i, "cx"); ^ ../arch/x86/include/asm/refcount.h:86:27: error: asm-specifier for input or output variable conflicts with asm clobber list r->refs.counter, e, "cx"); ^ 2 errors generated. Override volatile() to workaround the problem. Signed-off-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann Signed-off-by: Sasha Levin commit 46ffc4fe597f09605b5fddc75430406afad7759b Author: David Kozub Date: Thu Feb 14 01:15:53 2019 +0100 block: sed-opal: fix IOC_OPAL_ENABLE_DISABLE_MBR [ Upstream commit 78bf47353b0041865564deeed257a54f047c2fdc ] The implementation of IOC_OPAL_ENABLE_DISABLE_MBR handled the value opal_mbr_data.enable_disable incorrectly: enable_disable is expected to be one of OPAL_MBR_ENABLE(0) or OPAL_MBR_DISABLE(1). enable_disable was passed directly to set_mbr_done and set_mbr_enable_disable where is was interpreted as either OPAL_TRUE(1) or OPAL_FALSE(0). The end result was that calling IOC_OPAL_ENABLE_DISABLE_MBR with OPAL_MBR_ENABLE actually disabled the shadow MBR and vice versa. This patch adds correct conversion from OPAL_MBR_DISABLE/ENABLE to OPAL_FALSE/TRUE. The change affects existing programs using IOC_OPAL_ENABLE_DISABLE_MBR but this is typically used only once when setting up an Opal drive. Acked-by: Jon Derrick Reviewed-by: Christoph Hellwig Reviewed-by: Scott Bauer Signed-off-by: David Kozub Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit 95ea6c20d44ce03b2ed34621bd9a3eedc3d6e40c Author: Wen Yang Date: Mon Apr 1 09:37:49 2019 +0800 cpufreq: imx6q: fix possible object reference leak [ Upstream commit ddb64c5db3cc8fb9c1242214d5798b2c2865681c ] The call to of_node_get returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/cpufreq/imx6q-cpufreq.c:391:4-10: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 348, but without a corresponding object release within this function. ./drivers/cpufreq/imx6q-cpufreq.c:395:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 348, but without a corresponding object release within this function. Signed-off-by: Wen Yang Cc: "Rafael J. Wysocki" Cc: Viresh Kumar Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Cc: linux-pm@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Viresh Kumar Signed-off-by: Sasha Levin commit 909c2b0f28b61b9680cfe965b56c501b9b7dfeaf Author: Wen Yang Date: Mon Apr 1 09:37:50 2019 +0800 cpufreq: kirkwood: fix possible object reference leak [ Upstream commit 7c468966f05ac9c17bb5948275283d34e6fe0660 ] The call to of_get_child_by_name returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/cpufreq/kirkwood-cpufreq.c:127:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 118, but without a corresponding object release within this function. ./drivers/cpufreq/kirkwood-cpufreq.c:133:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 118, but without a corresponding object release within this function. and also do some cleanup: - of_node_put(np); - np = NULL; ... of_node_put(np); Signed-off-by: Wen Yang Cc: "Rafael J. Wysocki" Cc: Viresh Kumar Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Viresh Kumar Signed-off-by: Sasha Levin commit 4357c55d0e74432a55f7d6e661843d2e4abecbbb Author: Wen Yang Date: Mon Apr 1 09:37:53 2019 +0800 cpufreq: pmac32: fix possible object reference leak [ Upstream commit 8d10dc28a9ea6e8c02e825dab28699f3c72b02d9 ] The call to of_find_node_by_name returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/cpufreq/pmac32-cpufreq.c:557:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 552, but without a corresponding object release within this function. ./drivers/cpufreq/pmac32-cpufreq.c:569:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 552, but without a corresponding object release within this function. ./drivers/cpufreq/pmac32-cpufreq.c:598:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 587, but without a corresponding object release within this function. Signed-off-by: Wen Yang Cc: "Rafael J. Wysocki" Cc: Viresh Kumar Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Michael Ellerman Cc: linux-pm@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Viresh Kumar Signed-off-by: Sasha Levin commit 20c2795d693c6bf17d175677d2fe3e84340762f9 Author: Wen Yang Date: Mon Apr 1 09:37:52 2019 +0800 cpufreq/pasemi: fix possible object reference leak [ Upstream commit a9acc26b75f652f697e02a9febe2ab0da648a571 ] The call to of_get_cpu_node returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/cpufreq/pasemi-cpufreq.c:212:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 147, but without a corresponding object release within this function. ./drivers/cpufreq/pasemi-cpufreq.c:220:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 147, but without a corresponding object release within this function. Signed-off-by: Wen Yang Cc: "Rafael J. Wysocki" Cc: Viresh Kumar Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Viresh Kumar Signed-off-by: Sasha Levin commit a275e0daa0209900f7ec21819118a0045985e07e Author: Wen Yang Date: Mon Apr 1 09:37:54 2019 +0800 cpufreq: ppc_cbe: fix possible object reference leak [ Upstream commit 233298032803f2802fe99892d0de4ab653bfece4 ] The call to of_get_cpu_node returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/cpufreq/ppc_cbe_cpufreq.c:89:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 76, but without a corresponding object release within this function. ./drivers/cpufreq/ppc_cbe_cpufreq.c:89:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 76, but without a corresponding object release within this function. Signed-off-by: Wen Yang Cc: "Rafael J. Wysocki" Cc: Viresh Kumar Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Viresh Kumar Signed-off-by: Sasha Levin commit e75dc2804b098e164e6d27d89aa857ed4699bb91 Author: Huazhong Tan Date: Sat Apr 6 15:43:34 2019 +0800 net: hns3: add error handler for initializing command queue [ Upstream commit 4339ef396ab65a61f7f22f36d7ba94b6e9e0939b ] This patch adds error handler for the failure of command queue initialization both PF and VF. Signed-off-by: Huazhong Tan Signed-off-by: Peng Li Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 9d399e5ffd3c6088dbd5347ca05eb37dfdf50116 Author: Kristian Evensen Date: Sun Apr 7 15:39:09 2019 +0200 qmi_wwan: Add quirk for Quectel dynamic config [ Upstream commit e4bf63482c309287ca84d91770ffa7dcc18e37eb ] Most, if not all, Quectel devices use dynamic interface numbers, and users are able to change the USB configuration at will. Matching on for example interface number is therefore not possible. Instead, the QMI device can be identified by looking at the interface class, subclass and protocol (all 0xff), as well as the number of endpoints. The reason we need to look at the number of endpoints, is that the diagnostic port interface has the same class, subclass and protocol as QMI. However, the diagnostic port only has two endpoints, while QMI has three. Until now, we have identified the QMI device by combining a match on class, subclass and protocol, with a call to the function quectel_diag_detect(). In quectel_diag_detect(), we check if the number of endpoints matches for known Quectel vendor/product ids. Adding new vendor/product ids to quectel_diag_detect() is not a good long-term solution. This commit replaces the function with a quirk, and applies the quirk to affected Quectel devices that I have been able to test the change with (EP06, EM12 and EC25). If the quirk is set and the number of endpoints equal two, we return from qmi_wwan_probe() with -ENODEV. Signed-off-by: Kristian Evensen Acked-by: Bjørn Mork Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit cc1ac79257c28dcb4154976bc7b82c863b63c418 Author: Huazhong Tan Date: Sat Apr 6 15:43:36 2019 +0800 net: hns3: fix keep_alive_timer not stop problem [ Upstream commit e233516e6a92baeec20aa40fa5b63be6b94f1627 ] When hclgevf_client_start() fails or VF driver unloaded, there is nobody to disable keep_alive_timer. So this patch fixes them. Fixes: a6d818e31d08 ("net: hns3: Add vport alive state checking support") Signed-off-by: Huazhong Tan Signed-off-by: Peng Li Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit de48733de46bb4b08307734e361b869691ed32fd Author: Roman Gushchin Date: Mon Apr 8 15:12:30 2019 -0700 selftests: cgroup: fix cleanup path in test_memcg_subtree_control() [ Upstream commit e14d314c7a489f060d6d691866fef5f131281718 ] Dan reported, that cleanup path in test_memcg_subtree_control() triggers a static checker warning: ./tools/testing/selftests/cgroup/test_memcontrol.c:76 \ test_memcg_subtree_control() error: uninitialized symbol 'child2'. Fix this by initializing child2 and parent2 variables and split the cleanup path into few stages. Signed-off-by: Roman Gushchin Fixes: 84092dbcf901 ("selftests: cgroup: add memory controller self-tests") Reported-by: Dan Carpenter Cc: Dan Carpenter Cc: Shuah Khan (Samsung OSG) Cc: Mike Rapoport Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin commit d3cbcc1032ffecec6cab8a7f2b4620d52513b966 Author: Arnd Bergmann Date: Mon Apr 8 23:26:20 2019 +0200 s390: cio: fix cio_irb declaration [ Upstream commit e91012ee855ad9f5ef2ab106a3de51db93fe4d0c ] clang points out that the declaration of cio_irb does not match the definition exactly, it is missing the alignment attribute: ../drivers/s390/cio/cio.c:50:1: warning: section does not match previous declaration [-Wsection] DEFINE_PER_CPU_ALIGNED(struct irb, cio_irb); ^ ../include/linux/percpu-defs.h:150:2: note: expanded from macro 'DEFINE_PER_CPU_ALIGNED' DEFINE_PER_CPU_SECTION(type, name, PER_CPU_ALIGNED_SECTION) \ ^ ../include/linux/percpu-defs.h:93:9: note: expanded from macro 'DEFINE_PER_CPU_SECTION' extern __PCPU_ATTRS(sec) __typeof__(type) name; \ ^ ../include/linux/percpu-defs.h:49:26: note: expanded from macro '__PCPU_ATTRS' __percpu __attribute__((section(PER_CPU_BASE_SECTION sec))) \ ^ ../drivers/s390/cio/cio.h:118:1: note: previous attribute is here DECLARE_PER_CPU(struct irb, cio_irb); ^ ../include/linux/percpu-defs.h:111:2: note: expanded from macro 'DECLARE_PER_CPU' DECLARE_PER_CPU_SECTION(type, name, "") ^ ../include/linux/percpu-defs.h:87:9: note: expanded from macro 'DECLARE_PER_CPU_SECTION' extern __PCPU_ATTRS(sec) __typeof__(type) name ^ ../include/linux/percpu-defs.h:49:26: note: expanded from macro '__PCPU_ATTRS' __percpu __attribute__((section(PER_CPU_BASE_SECTION sec))) \ ^ Use DECLARE_PER_CPU_ALIGNED() here, to make the two match. Signed-off-by: Arnd Bergmann Reviewed-by: Nathan Chancellor Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky Signed-off-by: Sasha Levin commit 8c19d2c56bd1c013b2cf46bb28ce9b2dd685521a Author: Thomas Huth Date: Sun Apr 7 14:55:09 2019 +0200 s390/mm: silence compiler warning when compiling without CONFIG_PGSTE [ Upstream commit 81a8f2beb32a5951ecf04385301f50879abc092b ] If CONFIG_PGSTE is not set (e.g. when compiling without KVM), GCC complains: CC arch/s390/mm/pgtable.o arch/s390/mm/pgtable.c:413:15: warning: ‘pmd_alloc_map’ defined but not used [-Wunused-function] static pmd_t *pmd_alloc_map(struct mm_struct *mm, unsigned long addr) ^~~~~~~~~~~~~ Wrap the function with "#ifdef CONFIG_PGSTE" to silence the warning. Signed-off-by: Thomas Huth Reviewed-by: David Hildenbrand Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky Signed-off-by: Sasha Levin commit 28890eab7ee27c32c2b188fe7b8a0f7ab2564b91 Author: Borislav Petkov Date: Thu Apr 4 22:14:07 2019 +0200 x86/microcode: Fix the ancient deprecated microcode loading method [ Upstream commit 24613a04ad1c0588c10f4b5403ca60a73d164051 ] Commit 2613f36ed965 ("x86/microcode: Attempt late loading only when new microcode is present") added the new define UCODE_NEW to denote that an update should happen only when newer microcode (than installed on the system) has been found. But it missed adjusting that for the old /dev/cpu/microcode loading interface. Fix it. Fixes: 2613f36ed965 ("x86/microcode: Attempt late loading only when new microcode is present") Signed-off-by: Borislav Petkov Reviewed-by: Thomas Gleixner Cc: Jann Horn Link: https://lkml.kernel.org/r/20190405133010.24249-3-bp@alien8.de Signed-off-by: Sasha Levin commit 700c555c76486c850be28597c1cad0967d02bace Author: Arnd Bergmann Date: Mon Apr 8 23:26:18 2019 +0200 s390: zcrypt: initialize variables before_use [ Upstream commit 913140e221567b3ecd21b4242257a7e3fa279026 ] The 'func_code' variable gets printed in debug statements without a prior initialization in multiple functions, as reported when building with clang: drivers/s390/crypto/zcrypt_api.c:659:6: warning: variable 'func_code' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] if (mex->outputdatalength < mex->inputdatalength) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/s390/crypto/zcrypt_api.c:725:29: note: uninitialized use occurs here trace_s390_zcrypt_rep(mex, func_code, rc, ^~~~~~~~~ drivers/s390/crypto/zcrypt_api.c:659:2: note: remove the 'if' if its condition is always false if (mex->outputdatalength < mex->inputdatalength) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/s390/crypto/zcrypt_api.c:654:24: note: initialize the variable 'func_code' to silence this warning unsigned int func_code; ^ Add initializations to all affected code paths to shut up the warning and make the warning output consistent. Signed-off-by: Arnd Bergmann Signed-off-by: Martin Schwidefsky Signed-off-by: Sasha Levin commit 9f69f7e7186a6388cf2dc199e7fcac174a4c32f5 Author: Michael Tretter Date: Tue Mar 19 11:01:46 2019 +0100 clk: zynqmp: fix check for fractional clock [ Upstream commit c06e64407e031e71c67f45f07981510ca4c880a1 ] The firmware sets BIT(13) in clkflag to mark a divider as fractional divider. The clock driver copies the clkflag straight to the flags of the common clock framework. In the common clk framework flags, BIT(13) is defined as CLK_DUTY_CYCLE_PARENT. Add a new field to the zynqmp_clk_divider to specify if a divider is a fractional devider. Set this field based on the clkflag when registering a divider. At the same time, unset BIT(13) from clkflag when copying the flags to the common clk framework flags. Signed-off-by: Michael Tretter Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin commit 03492b8e72c2342c2c3f8c25a97b2756db717a7d Author: Douglas Anderson Date: Tue Apr 9 13:47:06 2019 -0700 clk: rockchip: Make rkpwm a critical clock on rk3288 [ Upstream commit dfe7fb21cd9e730230d55a79bc72cf2ece67cdd5 ] Most rk3288-based boards are derived from the EVB and thus use a PWM regulator for the logic rail. However, most rk3288-based boards don't specify the PWM regulator in their device tree. We'll deal with that by making it critical. NOTE: it's important to make it critical and not just IGNORE_UNUSED because all PWMs in the system share the same clock. We don't want another PWM user to turn the clock on and off and kill the logic rail. This change is in preparation for actually having the PWMs in the rk3288 device tree actually point to the proper PWM clock. Up until now they've all pointed to the clock for the old IP block and they've all worked due to the fact that rkpwm was IGNORE_UNUSED and that the clock rates for both clocks were the same. Signed-off-by: Douglas Anderson Signed-off-by: Heiko Stuebner Signed-off-by: Sasha Levin commit a732a0940e40c307e7d94582768db44846a1e7ed Author: Charles Keepax Date: Thu Apr 4 17:33:56 2019 +0100 extcon: arizona: Disable mic detect if running when driver is removed [ Upstream commit 00053de52231117ddc154042549f2256183ffb86 ] Microphone detection provides the button detection features on the Arizona CODECs as such it will be running if the jack is currently inserted. If the driver is unbound whilst the jack is still inserted this will cause warnings from the regulator framework as the MICVDD regulator is put but was never disabled. Correct this by disabling microphone detection on driver removal and if the microphone detection was running disable the regulator and put the runtime reference that was currently held. Signed-off-by: Charles Keepax Signed-off-by: Chanwoo Choi Signed-off-by: Sasha Levin commit d3b4d73ef7848683f0413595a6fb631a222b2ad0 Author: Douglas Anderson Date: Thu Apr 11 06:55:55 2019 -0700 clk: rockchip: Fix video codec clocks on rk3288 [ Upstream commit 00c0cd9e59d265b393553e9afa54fee8b10e8158 ] It appears that there is a typo in the rk3288 TRM. For GRF_SOC_CON0[7] it says that 0 means "vepu" and 1 means "vdpu". It's the other way around. How do I know? Here's my evidence: 1. Prior to commit 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec using the new muxgrf type on rk3288") we always pretended that we were using "aclk_vdpu" and the comment in the code said that this matched the default setting in the system. In fact the default setting is 0 according to the TRM and according to reading memory at bootup. In addition rk3288-based Chromebooks ran like this and the video codecs worked. 2. With the existing clock code if you boot up and try to enable the new VIDEO_ROCKCHIP_VPU as a module (and without "clk_ignore_unused" on the command line), you get errors like "failed to get ack on domain 'pd_video', val=0x80208". After flipping vepu/vdpu things init OK. 3. If I export and add both the vepu and vdpu to the list of clocks for RK3288_PD_VIDEO I can get past the power domain errors, but now I freeze when the vpu_mmu gets initted. 4. If I just mark the "vdpu" as IGNORE_UNUSED then everything boots up and probes OK showing that somehow the "vdpu" was important to keep enabled. This is because we were actually using it as a parent. 5. After this change I can hack "aclk_vcodec_pre" to parent from "aclk_vepu" using assigned-clocks and the video codec still probes OK. 6. Rockchip has said so on the mailing list [1]. ...so let's fix it. Let's also add CLK_SET_RATE_PARENT to "aclk_vcodec_pre" as suggested by Jonas Karlman. Prior to the same commit you could do clk_set_rate() on "aclk_vcodec" and it would change "aclk_vdpu". That's because "aclk_vcodec" was a simple gate clock (always gets CLK_SET_RATE_PARENT) and its direct parent was "aclk_vdpu". After that commit "aclk_vcodec_pre" gets in the way so we need to add CLK_SET_RATE_PARENT to it too. [1] https://lkml.kernel.org/r/1d17b015-9e17-34b9-baf8-c285dc1957aa@rock-chips.com Fixes: 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec using the new muxgrf type on rk3288") Suggested-by: Jonas Karlman Suggested-by: Randy Li Signed-off-by: Douglas Anderson Signed-off-by: Heiko Stuebner Signed-off-by: Sasha Levin commit 414989cd9387ae2ed26228fdf31dd70fa17d7a7e Author: Ulf Hansson Date: Wed Apr 10 11:55:16 2019 +0200 PM / core: Propagate dev->power.wakeup_path when no callbacks [ Upstream commit dc351d4c5f4fe4d0f274d6d660227be0c3a03317 ] The dev->power.direct_complete flag may become set in device_prepare() in case the device don't have any PM callbacks (dev->power.no_pm_callbacks is set). This leads to a broken behaviour, when there is child having wakeup enabled and relies on its parent to be used in the wakeup path. More precisely, when the direct complete path becomes selected for the child in __device_suspend(), the propagation of the dev->power.wakeup_path becomes skipped as well. Let's address this problem, by checking if the device is a part the wakeup path or has wakeup enabled, then prevent the direct complete path from being used. Reported-by: Loic Pallardy Signed-off-by: Ulf Hansson [ rjw: Comment cleanup ] Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit 78a2fc2382d5b6bab205bdcfa37a27e22747af1c Author: Christian König Date: Fri Mar 29 19:30:23 2019 +0100 drm/amdgpu: fix old fence check in amdgpu_fence_emit [ Upstream commit 3d2aca8c8620346abdba96c6300d2c0b90a1d0cc ] We don't hold a reference to the old fence, so it can go away any time we are waiting for it to signal. Signed-off-by: Christian König Reviewed-by: Chunming Zhou Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit cbc7dc74f4126091eeb943a7b075f36537376c7d Author: Peng Li Date: Sun Apr 14 09:47:45 2019 +0800 net: hns3: free the pending skb when clean RX ring [ Upstream commit cc5ff6e90f808f9a4c8229bf2f1de0dfe5d7931c ] If there is pending skb in RX flow when close the port, and the pending buffer is not cleaned, the new packet will be added to the pending skb when the port opens again, and the first new packet has error data. This patch cleans the pending skb when clean RX ring. Signed-off-by: Peng Li Signed-off-by: Huazhong Tan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 86c59a100b4d84b3aee855b4f9113f833f9189a8 Author: Yinbo Zhu Date: Mon Mar 11 02:16:40 2019 +0000 mmc: sdhci-of-esdhc: add erratum eSDHC-A001 and A-008358 support [ Upstream commit 05cb6b2a66fa7837211a060878e91be5eb10cb07 ] eSDHC-A001: The data timeout counter (SYSCTL[DTOCV]) is not reliable for DTOCV values 0x4(2^17 SD clock), 0x8(2^21 SD clock), and 0xC(2^25 SD clock). The data timeout counter can count from 2^13–2^27, but for values 2^17, 2^21, and 2^25, the timeout counter counts for only 2^13 SD clocks. A-008358: The data timeout counter value loaded into the timeout counter is less than expected and can result into early timeout error in case of eSDHC data transactions. The table below shows the expected vs actual timeout period for different values of SYSCTL[DTOCV]: these two erratum has the same quirk to control it, and set SDHCI_QUIRK_RESET_AFTER_REQUEST to fix above issue. Signed-off-by: Yinbo Zhu Acked-by: Adrian Hunter Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin commit 594708945e8639b2093c5e29a8cfd662b86cd1f8 Author: Yinbo Zhu Date: Mon Mar 11 02:16:44 2019 +0000 mmc: sdhci-of-esdhc: add erratum A-009204 support [ Upstream commit 5dd195522562542bc6ebe6e7bd47890d8b7ca93c ] In the event of that any data error (like, IRQSTAT[DCE]) occurs during an eSDHC data transaction where DMA is used for data transfer to/from the system memory, setting the SYSCTL[RSTD] register may cause a system hang. If software sets the register SYSCTL[RSTD] to 1 for error recovery while DMA transferring is not complete, eSDHC may hang the system bus. This happens because the software register SYSCTL[RSTD] resets the DMA engine without waiting for the completion of pending system transactions. This erratum is to fix this issue. Signed-off-by: Yinbo Zhu Acked-by: Adrian Hunter Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin commit c516ee4b59197c2185ad9e124d9897beae26a173 Author: Yinbo Zhu Date: Mon Mar 11 02:16:36 2019 +0000 mmc: sdhci-of-esdhc: add erratum eSDHC5 support [ Upstream commit a46e42712596b51874f04c73f1cdf1017f88df52 ] Software writing to the Transfer Type configuration register (system clock domain) can cause a setup/hold violation in the CRC flops (card clock domain), which can cause write accesses to be sent with corrupt CRC values. This issue occurs only for write preceded by read. this erratum is to fix this issue. Signed-off-by: Yinbo Zhu Acked-by: Adrian Hunter Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin commit 5b567db0051a9ca06b68426ac45ef94487dc4c82 Author: Kangjie Lu Date: Mon Mar 11 00:53:33 2019 -0500 mmc_spi: add a status check for spi_sync_locked [ Upstream commit 611025983b7976df0183390a63a2166411d177f1 ] In case spi_sync_locked fails, the fix reports the error and returns the error code upstream. Signed-off-by: Kangjie Lu Reviewed-by: Laurent Pinchart Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin commit 6bef2bd78b8d18e9183af354414926a4ec02f64e Author: Andrea Merello Date: Fri Apr 5 10:34:58 2019 +0200 mmc: core: make pwrseq_emmc (partially) support sleepy GPIO controllers [ Upstream commit 002ee28e8b322d4d4b7b83234b5d0f4ebd428eda ] pwrseq_emmc.c implements a HW reset procedure for eMMC chip by driving a GPIO line. It registers the .reset() cb on mmc_pwrseq_ops and it registers a system restart notification handler; both of them perform reset by unconditionally calling gpiod_set_value(). If the eMMC reset line is tied to a GPIO controller whose driver can sleep (i.e. I2C GPIO controller), then the kernel would spit warnings when trying to reset the eMMC chip by means of .reset() mmc_pwrseq_ops cb (that is exactly what I'm seeing during boot). Furthermore, on system reset we would gets to the system restart notification handler with disabled interrupts - local_irq_disable() is called in machine_restart() at least on ARM/ARM64 - and we would be in trouble when the GPIO driver tries to sleep (which indeed doesn't happen here, likely because in my case the machine specific code doesn't call do_kernel_restart(), I guess..). This patch fixes the .reset() cb to make use of gpiod_set_value_cansleep(), so that the eMMC gets reset on boot without complaints, while, since there isn't that much we can do, we avoid register the restart handler if the GPIO controller has a sleepy driver (and we spit a dev_notice() message to let people know).. This had been tested on a downstream 4.9 kernel with backported commit 83f37ee7ba33 ("mmc: pwrseq: Add reset callback to the struct mmc_pwrseq_ops") and commit ae60fb031cf2 ("mmc: core: Don't do eMMC HW reset when resuming the eMMC card"), because I couldn't boot my board otherwise. Maybe worth to RFT. Signed-off-by: Andrea Merello Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin commit 81c00ef2f255f1ffc23374c8000e658345faf718 Author: John Garry Date: Fri Apr 12 16:57:56 2019 +0800 scsi: libsas: Do discovery on empty PHY to update PHY info [ Upstream commit d8649fc1c5e40e691d589ed825998c36a947491c ] When we discover the PHY is empty in sas_rediscover_dev(), the PHY information (like negotiated linkrate) is not updated. As such, for a user examining sysfs for that PHY, they would see incorrect values: root@(none)$ cd /sys/class/sas_phy/phy-0:0:20 root@(none)$ more negotiated_linkrate 3.0 Gbit root@(none)$ echo 0 > enable root@(none)$ more negotiated_linkrate 3.0 Gbit So fix this, simply discover the PHY again, even though we know it's empty; in the above example, this gives us: root@(none)$ more negotiated_linkrate Phy disabled We must do this after unregistering the device associated with the PHY (in sas_unregister_devs_sas_addr()). Signed-off-by: John Garry Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit c11665e76f60ba1ee772910dd515843bbfdc93c1 Author: Guenter Roeck Date: Thu Apr 4 10:52:43 2019 -0700 hwmon: (f71805f) Use request_muxed_region for Super-IO accesses [ Upstream commit 73e6ff71a7ea924fb7121d576a2d41e3be3fc6b5 ] Super-IO accesses may fail on a system with no or unmapped LPC bus. Unable to handle kernel paging request at virtual address ffffffbffee0002e pgd = ffffffc1d68d4000 [ffffffbffee0002e] *pgd=0000000000000000, *pud=0000000000000000 Internal error: Oops: 94000046 [#1] PREEMPT SMP Modules linked in: f71805f(+) hwmon CPU: 3 PID: 1659 Comm: insmod Not tainted 4.5.0+ #88 Hardware name: linux,dummy-virt (DT) task: ffffffc1f6665400 ti: ffffffc1d6418000 task.ti: ffffffc1d6418000 PC is at f71805f_find+0x6c/0x358 [f71805f] Also, other drivers may attempt to access the LPC bus at the same time, resulting in undefined behavior. Use request_muxed_region() to ensure that IO access on the requested address space is supported, and to ensure that access by multiple drivers is synchronized. Fixes: e53004e20a58e ("hwmon: New f71805f driver") Reported-by: Kefeng Wang Reported-by: John Garry Cc: John Garry Acked-by: John Garry Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit 081d3fefbb894b321f803c7ebd6e96747301e961 Author: Guenter Roeck Date: Thu Apr 4 11:16:20 2019 -0700 hwmon: (pc87427) Use request_muxed_region for Super-IO accesses [ Upstream commit 755a9b0f8aaa5639ba5671ca50080852babb89ce ] Super-IO accesses may fail on a system with no or unmapped LPC bus. Also, other drivers may attempt to access the LPC bus at the same time, resulting in undefined behavior. Use request_muxed_region() to ensure that IO access on the requested address space is supported, and to ensure that access by multiple drivers is synchronized. Fixes: ba224e2c4f0a7 ("hwmon: New PC87427 hardware monitoring driver") Reported-by: Kefeng Wang Reported-by: John Garry Cc: John Garry Acked-by: John Garry Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit 860156471f53e6c189a16ea5a916bd8fb24fb65d Author: Guenter Roeck Date: Thu Apr 4 11:22:42 2019 -0700 hwmon: (smsc47b397) Use request_muxed_region for Super-IO accesses [ Upstream commit 8c0826756744c0ac1df600a5e4cca1a341b13101 ] Super-IO accesses may fail on a system with no or unmapped LPC bus. Also, other drivers may attempt to access the LPC bus at the same time, resulting in undefined behavior. Use request_muxed_region() to ensure that IO access on the requested address space is supported, and to ensure that access by multiple drivers is synchronized. Fixes: 8d5d45fb1468 ("I2C: Move hwmon drivers (2/3)") Reported-by: Kefeng Wang Reported-by: John Garry Cc: John Garry Acked-by: John Garry Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit a4f828b02b014daa86e73073b806e9c03eb58505 Author: Guenter Roeck Date: Thu Apr 4 11:28:37 2019 -0700 hwmon: (smsc47m1) Use request_muxed_region for Super-IO accesses [ Upstream commit d6410408ad2a798c4cc685252c1baa713be0ad69 ] Super-IO accesses may fail on a system with no or unmapped LPC bus. Also, other drivers may attempt to access the LPC bus at the same time, resulting in undefined behavior. Use request_muxed_region() to ensure that IO access on the requested address space is supported, and to ensure that access by multiple drivers is synchronized. Fixes: 8d5d45fb1468 ("I2C: Move hwmon drivers (2/3)") Reported-by: Kefeng Wang Reported-by: John Garry Cc: John Garry Acked-by: John Garry Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit 2ca1b3f336ded534460b5e2ffc51ca4ca49f0105 Author: Guenter Roeck Date: Fri Apr 5 08:53:08 2019 -0700 hwmon: (vt1211) Use request_muxed_region for Super-IO accesses [ Upstream commit 14b97ba5c20056102b3dd22696bf17b057e60976 ] Super-IO accesses may fail on a system with no or unmapped LPC bus. Also, other drivers may attempt to access the LPC bus at the same time, resulting in undefined behavior. Use request_muxed_region() to ensure that IO access on the requested address space is supported, and to ensure that access by multiple drivers is synchronized. Fixes: 2219cd81a6cd ("hwmon/vt1211: Add probing of alternate config index port") Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit d5a09b593f641121709abebbae38adf44abe40fc Author: Enric Balletbo i Serra Date: Wed Mar 13 13:22:53 2019 +0100 PM / devfreq: Fix static checker warning in try_then_request_governor [ Upstream commit b53b0128052ffd687797d5f4deeb76327e7b5711 ] The patch 23c7b54ca1cd: "PM / devfreq: Fix devfreq_add_device() when drivers are built as modules." leads to the following static checker warning: drivers/devfreq/devfreq.c:1043 governor_store() warn: 'governor' can also be NULL The reason is that the try_then_request_governor() function returns both error pointers and NULL. It should just return error pointers, so fix this by returning a ERR_PTR to the error intead of returning NULL. Fixes: 23c7b54ca1cd ("PM / devfreq: Fix devfreq_add_device() when drivers are built as modules.") Reported-by: Dan Carpenter Signed-off-by: Enric Balletbo i Serra Reviewed-by: Chanwoo Choi Signed-off-by: MyungJoo Ham Signed-off-by: Sasha Levin commit 034485a71764b0843001e2735b0c225f728f02cf Author: Kan Liang Date: Tue Apr 2 12:45:06 2019 -0700 perf/x86/intel/cstate: Add Icelake support [ Upstream commit f08c47d1f86c6dc666c7e659d94bf6d4492aa9d7 ] Icelake uses the same C-state residency events as Sandy Bridge. Signed-off-by: Kan Liang Signed-off-by: Peter Zijlstra (Intel) Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Thomas Gleixner Cc: Vince Weaver Cc: acme@kernel.org Cc: jolsa@kernel.org Link: https://lkml.kernel.org/r/20190402194509.2832-10-kan.liang@linux.intel.com Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin commit 618d1f844273af35f1e951afb5a731bcb931bda8 Author: Kan Liang Date: Tue Apr 2 12:45:07 2019 -0700 perf/x86/intel/rapl: Add Icelake support [ Upstream commit b3377c3acb9e54cf86efcfe25f2e792bca599ed4 ] Icelake support the same RAPL counters as Skylake. Signed-off-by: Kan Liang Signed-off-by: Peter Zijlstra (Intel) Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Thomas Gleixner Cc: Vince Weaver Cc: acme@kernel.org Cc: jolsa@kernel.org Link: https://lkml.kernel.org/r/20190402194509.2832-11-kan.liang@linux.intel.com Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin commit 83d19d2f5b4cf7c7b6c245335f1caba8ee973c53 Author: Kan Liang Date: Tue Apr 2 12:45:08 2019 -0700 perf/x86/msr: Add Icelake support [ Upstream commit cf50d79a8cfe5adae37fec026220b009559bbeed ] Icelake is the same as the existing Skylake parts. Signed-off-by: Kan Liang Signed-off-by: Peter Zijlstra (Intel) Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Thomas Gleixner Cc: Vince Weaver Cc: acme@kernel.org Cc: jolsa@kernel.org Link: https://lkml.kernel.org/r/20190402194509.2832-12-kan.liang@linux.intel.com Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin commit 941198a0f9e84352969045b24c3c9462a3b1a359 Author: Colin Ian King Date: Sat Apr 13 17:00:26 2019 +0100 RDMA/cxgb4: Fix null pointer dereference on alloc_skb failure [ Upstream commit a6d2a5a92e67d151c98886babdc86d530d27111c ] Currently if alloc_skb fails to allocate the skb a null skb is passed to t4_set_arp_err_handler and this ends up dereferencing the null skb. Avoid the NULL pointer dereference by checking for a NULL skb and returning early. Addresses-Coverity: ("Dereference null return") Fixes: b38a0ad8ec11 ("RDMA/cxgb4: Set arp error handler for PASS_ACCEPT_RPL messages") Signed-off-by: Colin Ian King Acked-by: Potnuri Bharat Teja Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin commit d306fa351148b04a158b208439d11f77df10145d Author: Vincenzo Frascino Date: Tue Apr 16 17:14:30 2019 +0100 arm64: vdso: Fix clock_getres() for CLOCK_REALTIME [ Upstream commit 81fb8736dd81da3fe94f28968dac60f392ec6746 ] clock_getres() in the vDSO library has to preserve the same behaviour of posix_get_hrtimer_res(). In particular, posix_get_hrtimer_res() does: sec = 0; ns = hrtimer_resolution; where 'hrtimer_resolution' depends on whether or not high resolution timers are enabled, which is a runtime decision. The vDSO incorrectly returns the constant CLOCK_REALTIME_RES. Fix this by exposing 'hrtimer_resolution' in the vDSO datapage and returning that instead. Reviewed-by: Catalin Marinas Signed-off-by: Vincenzo Frascino [will: Use WRITE_ONCE(), move adr off COARSE path, renumber labels, use 'w' reg] Signed-off-by: Will Deacon Signed-off-by: Sasha Levin commit b975333e49d4ce944756d007f6ccb7314994dea9 Author: Kefeng Wang Date: Mon Apr 8 23:21:12 2019 +0800 ACPI/IORT: Reject platform device creation on NUMA node mapping failure [ Upstream commit 36a2ba07757df790b4a874efb1a105b9330a9ae7 ] In a system where, through IORT firmware mappings, the SMMU device is mapped to a NUMA node that is not online, the kernel bootstrap results in the following crash: Unable to handle kernel paging request at virtual address 0000000000001388 Mem abort info: ESR = 0x96000004 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [0000000000001388] user address but active_mm is swapper Internal error: Oops: 96000004 [#1] SMP Modules linked in: CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.0.0 #15 pstate: 80c00009 (Nzcv daif +PAN +UAO) pc : __alloc_pages_nodemask+0x13c/0x1068 lr : __alloc_pages_nodemask+0xdc/0x1068 ... Process swapper/0 (pid: 1, stack limit = 0x(____ptrval____)) Call trace: __alloc_pages_nodemask+0x13c/0x1068 new_slab+0xec/0x570 ___slab_alloc+0x3e0/0x4f8 __slab_alloc+0x60/0x80 __kmalloc_node_track_caller+0x10c/0x478 devm_kmalloc+0x44/0xb0 pinctrl_bind_pins+0x4c/0x188 really_probe+0x78/0x2b8 driver_probe_device+0x64/0x110 device_driver_attach+0x74/0x98 __driver_attach+0x9c/0xe8 bus_for_each_dev+0x84/0xd8 driver_attach+0x30/0x40 bus_add_driver+0x170/0x218 driver_register+0x64/0x118 __platform_driver_register+0x54/0x60 arm_smmu_driver_init+0x24/0x2c do_one_initcall+0xbc/0x328 kernel_init_freeable+0x304/0x3ac kernel_init+0x18/0x110 ret_from_fork+0x10/0x1c Code: f90013b5 b9410fa1 1a9f0694 b50014c2 (b9400804) ---[ end trace dfeaed4c373a32da ]-- Change the dev_set_proximity() hook prototype so that it returns a value and make it return failure if the PXM->NUMA-node mapping corresponds to an offline node, fixing the crash. Acked-by: Lorenzo Pieralisi Signed-off-by: Kefeng Wang Link: https://lore.kernel.org/linux-arm-kernel/20190315021940.86905-1-wangkefeng.wang@huawei.com/ Signed-off-by: Will Deacon Signed-off-by: Sasha Levin commit 32123c567406c1fcc68775069d2d1428d1727bab Author: Nicholas Nunley Date: Wed Feb 6 15:08:17 2019 -0800 i40e: don't allow changes to HW VLAN stripping on active port VLANs [ Upstream commit bfb0ebed53857cfc57f11c63fa3689940d71c1c8 ] Modifying the VLAN stripping options when a port VLAN is configured will break traffic for the VSI, and conceptually doesn't make sense, so don't allow this. Signed-off-by: Nicholas Nunley Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin commit e6abfd1fc057e14a13ede1338fb3fe55513d31e3 Author: Adam Ludkiewicz Date: Wed Feb 6 15:08:25 2019 -0800 i40e: Able to add up to 16 MAC filters on an untrusted VF [ Upstream commit 06b6e2a2333eb3581567a7ac43ca465ef45f4daa ] This patch fixes the problem with the driver being able to add only 7 multicast MAC address filters instead of 16. The problem is fixed by changing the maximum number of MAC address filters to 16+1+1 (two extra are needed because the driver uses 1 for unicast MAC address and 1 for broadcast). Signed-off-by: Adam Ludkiewicz Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin commit ae0482134880905efa4cc061cde597148c496fdd Author: Ioana Ciocoi Radulescu Date: Tue Apr 16 17:13:28 2019 +0000 dpaa2-eth: Fix Rx classification status [ Upstream commit df8e249be866e2f762be11b14a9e7a94752614d4 ] Set the Rx flow classification enable flag only if key config operation is successful. Fixes 3f9b5c9 ("dpaa2-eth: Configure Rx flow classification key") Signed-off-by: Ioana Radulescu Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 66e5886ba0bc853be60b1f528583a2668d06be08 Author: Arnd Bergmann Date: Mon Mar 4 21:23:58 2019 +0100 phy: mapphone-mdm6600: add gpiolib dependency [ Upstream commit 208d3423ee463ab257908456f6bbca4024ab63f7 ] gcc points out that when CONFIG_GPIOLIB is disabled, gpiod_get_array_value_cansleep() returns 0 but fails to set its output: drivers/phy/motorola/phy-mapphone-mdm6600.c: In function 'phy_mdm6600_status': drivers/phy/motorola/phy-mapphone-mdm6600.c:220:24: error: 'values[0]' is used uninitialized in this function [-Werror=uninitialized] This could be fixed more generally in gpiolib by returning a failure code, but for this specific case, the easier workaround is to add a gpiolib dependency. Fixes: 5d1ebbda0318 ("phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4") Signed-off-by: Arnd Bergmann Acked-by: Tony Lindgren Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin commit fb63c3e6bb1b7db8509b00675d74aae532d9827b Author: Paul Kocialkowski Date: Thu Mar 14 14:05:18 2019 +0100 phy: sun4i-usb: Make sure to disable PHY0 passby for peripheral mode [ Upstream commit e6f32efb1b128344a2c7df9875bc1a1abaa1d395 ] On platforms where the MUSB and HCI controllers share PHY0, PHY passby is required when using the HCI controller with the PHY, but it must be disabled when the MUSB controller is used instead. Without this, PHY0 passby is always enabled, which results in broken peripheral mode on such platforms (e.g. H3/H5). Fixes: ba4bdc9e1dc0 ("PHY: sunxi: Add driver for sunxi usb phy") Signed-off-by: Paul Kocialkowski Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin commit a983ef2ca7b6f0843646e894aa20cc892a4dacac Author: Evan Green Date: Thu Mar 21 10:17:54 2019 -0700 dt-bindings: phy-qcom-qmp: Add UFS PHY reset [ Upstream commit 95cee0b4e30a09a411a17e9a3bc6b72ed92063da ] Add a required reset to the SDM845 UFS phy to express the PHY reset bit inside the UFS controller register space. Before this change, this reset was not expressed in the DT, and the driver utilized two different callbacks (phy_init and phy_poweron) to implement a two-phase initialization procedure that involved deasserting this reset between init and poweron. This abused the two callbacks and diluted their purpose. That scheme does not work as regulators cannot be turned off in phy_poweroff because they were turned on in init, rather than poweron. The net result is that regulators are left on in suspend that shouldn't be. This new scheme gives the UFS reset to the PHY, so that it can fully initialize itself in a single callback. We can then turn regulators on during poweron and off during poweroff. Signed-off-by: Evan Green Reviewed-by: Rob Herring Reviewed-by: Stephen Boyd Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin commit 8b2f655a0c9c834b4aa07af725b19f2aff2f5f36 Author: Russell King Date: Mon Feb 25 10:51:30 2019 +0000 drm: etnaviv: avoid DMA API warning when importing buffers [ Upstream commit 1262cc8893ecb0eb2c21e042d0d268cc180edb61 ] During boot, I get this kernel warning: WARNING: CPU: 0 PID: 19001 at kernel/dma/debug.c:1301 debug_dma_map_sg+0x284/0x3dc etnaviv etnaviv: DMA-API: mapping sg segment longer than device claims to support [len=3145728] [max=65536] Modules linked in: ip6t_REJECT nf_reject_ipv6 ip6t_rpfilter xt_tcpudp ipt_REJECT nf_reject_ipv4 xt_conntrack ip_set nfnetlink ebtable_broute ebtable_nat ip6table_raw ip6table_nat nf_nat_ipv6 ip6table_mangle iptable_raw iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv4 nf_defrag_ipv6 libcrc32c iptable_mangle ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter caam_jr error snd_soc_imx_spdif imx_thermal snd_soc_imx_audmux nvmem_imx_ocotp snd_soc_sgtl5000 caam imx_sdma virt_dma coda rc_cec v4l2_mem2mem snd_soc_fsl_ssi snd_soc_fsl_spdif imx_vdoa imx_pcm_dma videobuf2_dma_contig etnaviv dw_hdmi_cec gpu_sched dw_hdmi_ahb_audio imx6q_cpufreq nfsd sch_fq_codel ip_tables x_tables CPU: 0 PID: 19001 Comm: Xorg Not tainted 4.20.0+ #307 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x9c/0xd4) [] (dump_stack) from [] (__warn+0xf8/0x124) [] (__warn) from [] (warn_slowpath_fmt+0x38/0x48) [] (warn_slowpath_fmt) from [] (debug_dma_map_sg+0x284/0x3dc) [] (debug_dma_map_sg) from [] (drm_gem_map_dma_buf+0xc4/0x13c) [] (drm_gem_map_dma_buf) from [] (dma_buf_map_attachment+0x38/0x5c) [] (dma_buf_map_attachment) from [] (drm_gem_prime_import_dev+0x74/0x104) [] (drm_gem_prime_import_dev) from [] (drm_gem_prime_fd_to_handle+0x84/0x17c) [] (drm_gem_prime_fd_to_handle) from [] (drm_prime_fd_to_handle_ioctl+0x38/0x4c) [] (drm_prime_fd_to_handle_ioctl) from [] (drm_ioctl_kernel+0x90/0xc8) [] (drm_ioctl_kernel) from [] (drm_ioctl+0x1e0/0x3b0) [] (drm_ioctl) from [] (do_vfs_ioctl+0x90/0xa48) [] (do_vfs_ioctl) from [] (ksys_ioctl+0x34/0x60) [] (ksys_ioctl) from [] (ret_fast_syscall+0x0/0x28) Exception stack(0xd81a9fa8 to 0xd81a9ff0) 9fa0: b6c69c88 bec613f8 00000009 c00c642e bec613f8 b86c4600 9fc0: b6c69c88 bec613f8 c00c642e 00000036 012762e0 01276348 00000300 012d91f8 9fe0: b6989f18 bec613dc b697185c b667be5c irq event stamp: 47905 hardirqs last enabled at (47913): [] console_unlock+0x46c/0x680 hardirqs last disabled at (47922): [] console_unlock+0xb8/0x680 softirqs last enabled at (47754): [] __do_softirq+0x344/0x540 softirqs last disabled at (47701): [] irq_exit+0x124/0x144 ---[ end trace af477747acbcc642 ]--- The reason is the contiguous buffer exceeds the default maximum segment size of 64K as specified by dma_get_max_seg_size() in linux/dma-mapping.h. Fix this by providing our own segment size, which is set to 2GiB to cover the window found in MMUv1 GPUs. Signed-off-by: Russell King Signed-off-by: Lucas Stach Signed-off-by: Sasha Levin commit 562c09361024fff50670b0e4f8a93ba7da7cc7e3 Author: Thomas Gleixner Date: Sun Apr 14 17:59:38 2019 +0200 x86/irq/64: Limit IST stack overflow check to #DB stack [ Upstream commit 7dbcf2b0b770eeb803a416ee8dcbef78e6389d40 ] Commit 37fe6a42b343 ("x86: Check stack overflow in detail") added a broad check for the full exception stack area, i.e. it considers the full exception stack area as valid. That's wrong in two aspects: 1) It does not check the individual areas one by one 2) #DF, NMI and #MCE are not enabling interrupts which means that a regular device interrupt cannot happen in their context. In fact if a device interrupt hits one of those IST stacks that's a bug because some code path enabled interrupts while handling the exception. Limit the check to the #DB stack and consider all other IST stacks as 'overflow' or invalid. Signed-off-by: Thomas Gleixner Signed-off-by: Borislav Petkov Cc: Andy Lutomirski Cc: "H. Peter Anvin" Cc: Ingo Molnar Cc: Josh Poimboeuf Cc: Mitsuo Hayasaka Cc: Nicolai Stange Cc: Sean Christopherson Cc: x86-ml Link: https://lkml.kernel.org/r/20190414160143.682135110@linutronix.de Signed-off-by: Sasha Levin commit 227d91a25e87a0f2eb8588bed916328dd65be9c9 Author: Alan Stern Date: Tue Apr 16 10:50:01 2019 -0400 USB: core: Don't unbind interfaces following device reset failure [ Upstream commit 381419fa720060ba48b7bbc483be787d5b1dca6f ] The SCSI core does not like to have devices or hosts unregistered while error recovery is in progress. Trying to do so can lead to self-deadlock: Part of the removal code tries to obtain a lock already held by the error handler. This can cause problems for the usb-storage and uas drivers, because their error handler routines perform a USB reset, and if the reset fails then the USB core automatically goes on to unbind all drivers from the device's interfaces -- all while still in the context of the SCSI error handler. As it turns out, practically all the scenarios leading to a USB reset failure end up causing a device disconnect (the main error pathway in usb_reset_and_verify_device(), at the end of the routine, calls hub_port_logical_disconnect() before returning). As a result, the hub_wq thread will soon become aware of the problem and will unbind all the device's drivers in its own context, not in the error-handler's context. This means that usb_reset_device() does not need to call usb_unbind_and_rebind_marked_interfaces() in cases where usb_reset_and_verify_device() has returned an error, because hub_wq will take care of everything anyway. This particular problem was observed in somewhat artificial circumstances, by using usbfs to tell a hub to power-down a port connected to a USB-3 mass storage device using the UAS protocol. With the port turned off, the currently executing command timed out and the error handler started running. The USB reset naturally failed, because the hub port was off, and the error handler deadlocked as described above. Not carrying out the call to usb_unbind_and_rebind_marked_interfaces() fixes this issue. Signed-off-by: Alan Stern Reported-by: Kento Kobayashi Tested-by: Kento Kobayashi CC: Bart Van Assche CC: Martin K. Petersen CC: Jacky Cao Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit f956f86538745b0cd1aa779f1703ea1842efd96f Author: Julian Wiedmann Date: Wed Apr 17 18:17:29 2019 +0200 s390/qeth: handle error from qeth_update_from_chp_desc() [ Upstream commit a4cdc9baee0740748f16e50cd70c2607510df492 ] Subsequent code relies on the values that qeth_update_from_chp_desc() reads from the CHP descriptor. Rather than dealing with weird errors later on, just handle it properly here. Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit acbca5230a0adb35425776c1df57b3efd58cf6e6 Author: Mika Westerberg Date: Tue Mar 19 16:48:41 2019 +0200 thunderbolt: Take domain lock in switch sysfs attribute callbacks [ Upstream commit 09f11b6c99feaf86a26444bca85dc693b3f58f8b ] switch_lock was introduced because it allowed serialization of device authorization requests from userspace without need to take the big domain lock (tb->lock). This was fine because device authorization with ICM is just one command that is sent to the firmware. Now that we start to handle all tunneling in the driver switch_lock is not enough because we need to walk over the topology to establish paths. For this reason drop switch_lock from the driver completely in favour of big domain lock. There is one complication, though. If userspace is waiting for the lock in tb_switch_set_authorized(), it keeps the device_del() from removing the sysfs attribute because it waits for active users to release the attribute first which leads into following splat: INFO: task kworker/u8:3:73 blocked for more than 61 seconds. Tainted: G W 5.1.0-rc1+ #244 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kworker/u8:3 D12976 73 2 0x80000000 Workqueue: thunderbolt0 tb_handle_hotplug [thunderbolt] Call Trace: ? __schedule+0x2e5/0x740 ? _raw_spin_lock_irqsave+0x12/0x40 ? prepare_to_wait_event+0xc5/0x160 schedule+0x2d/0x80 __kernfs_remove.part.17+0x183/0x1f0 ? finish_wait+0x80/0x80 kernfs_remove_by_name_ns+0x4a/0x90 remove_files.isra.1+0x2b/0x60 sysfs_remove_group+0x38/0x80 sysfs_remove_groups+0x24/0x40 device_remove_attrs+0x3d/0x70 device_del+0x14c/0x360 device_unregister+0x15/0x50 tb_switch_remove+0x9e/0x1d0 [thunderbolt] tb_handle_hotplug+0x119/0x5a0 [thunderbolt] ? process_one_work+0x1b7/0x420 process_one_work+0x1b7/0x420 worker_thread+0x37/0x380 ? _raw_spin_unlock_irqrestore+0xf/0x30 ? process_one_work+0x420/0x420 kthread+0x118/0x130 ? kthread_create_on_node+0x60/0x60 ret_from_fork+0x35/0x40 We deal this by following what network stack did for some of their attributes and use mutex_trylock() with restart_syscall(). This makes userspace release the attribute allowing sysfs attribute removal to progress before the write is restarted and eventually fail when the attribute is removed. Signed-off-by: Mika Westerberg Signed-off-by: Sasha Levin commit 779eda0893864c613df3b75922d8151fef097c62 Author: Nicholas Piggin Date: Tue Apr 9 19:34:03 2019 +1000 irq_work: Do not raise an IPI when queueing work on the local CPU [ Upstream commit 471ba0e686cb13752bc1ff3216c54b69a2d250ea ] The QEMU PowerPC/PSeries machine model was not expecting a self-IPI, and it may be a bit surprising thing to do, so have irq_work_queue_on do local queueing when target is the current CPU. Suggested-by: Steven Rostedt Reported-by: Sebastian Andrzej Siewior Tested-by: Sebastian Andrzej Siewior Signed-off-by: Nicholas Piggin Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Frederic Weisbecker Acked-by: Peter Zijlstra (Intel) Cc: =?UTF-8?q?C=C3=A9dric=20Le=20Goater?= Cc: Linus Torvalds Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Suraj Jitindar Singh Cc: Thomas Gleixner Link: https://lkml.kernel.org/r/20190409093403.20994-1-npiggin@gmail.com [ Simplified the preprocessor comments. Fixed unbalanced curly brackets pointed out by Thomas. ] Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin commit 4d6986ae4e489ce45167ff9eb77f894248f22293 Author: Luca Weiss Date: Sat Mar 2 13:35:29 2019 +0100 drm/msm: Fix NULL pointer dereference [ Upstream commit 7603df38cc8c1e5d540b18ec9eb9d62d823197d0 ] [ 3.707412] Unable to handle kernel NULL pointer dereference at virtual address 0000009c [ 3.714511] pgd = (ptrval) [ 3.722742] [0000009c] *pgd=00000000 [ 3.725238] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 3.728968] Modules linked in: [ 3.734265] CPU: 3 PID: 112 Comm: kworker/3:2 Tainted: G W 5.0.0-rc7-00183-g06a1c31df9eb #4 [ 3.737142] Hardware name: Generic DT based system [ 3.746778] Workqueue: events deferred_probe_work_func [ 3.751542] PC is at msm_gem_map_vma+0x3c/0xac [ 3.756669] LR is at msm_gem_get_and_pin_iova+0xd8/0x134 [ 3.761086] pc : [] lr : [] psr: 60000013 [ 3.766560] sp : ee297be8 ip : ed9ab1c0 fp : ed93b800 [ 3.772546] r10: ee35e180 r9 : 00000000 r8 : ee297c80 [ 3.777752] r7 : 00000000 r6 : 7c100000 r5 : 00000000 r4 : ee35e180 [ 3.782968] r3 : 00000001 r2 : 00000003 r1 : ee35e180 r0 : 00000000 [ 3.789562] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 3.796079] Control: 10c5787d Table: 2e3a806a DAC: 00000051 [ 3.803282] Process kworker/3:2 (pid: 112, stack limit = 0x(ptrval)) [ 3.809006] Stack: (0xee297be8 to 0xee298000) [ 3.815445] 7be0: 00000000 c1108c48 eda8c000 00000003 eda8c0fc c1108c48 [ 3.819715] 7c00: eda8c000 00000003 eda8c0fc c07d14f8 00000001 c07d1100 7c100000 00000000 [ 3.827873] 7c20: eda8c000 bb7ffb78 00000000 eda8c000 00000000 00000000 c0c8b1d4 ee3bfa00 [ 3.836037] 7c40: ee3b9800 c07d1684 00000000 c1108c48 ee0d7810 ee3b9800 c0c8b1d4 c07d222c [ 3.844193] 7c60: ee3bfd84 ee297c80 00000000 c0b1d5b0 ee3bfc40 c07dcfd8 ee3bfd84 ee297c80 [ 3.852357] 7c80: 0000006d ee3bfc40 ee0d7810 bb7ffb78 c0c8b1d4 00000000 ee3bfc40 c07ddb48 [ 3.860516] 7ca0: 00002004 c0eba384 ee3bfc40 c079eba0 ee3bd040 ee3b9800 00000001 ed93b800 [ 3.868673] 7cc0: ed9aa100 c07db7e8 ee3bf240 ed9a6500 00000001 ee3b9800 ee3bf2d4 c07a0a30 [ 3.876834] 7ce0: ed93b800 7d100000 c1108c48 ee0d7610 ee3b9800 ed93b800 c1108c48 00000000 [ 3.884991] 7d00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 3.893151] 7d20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bb7ffb78 [ 3.901310] 7d40: c12113c4 ed93b800 ee3b9800 c1108c48 ee9eec10 00000000 ed93b800 7d100000 [ 3.909472] 7d60: eff7b000 c07cf748 7d100000 00000000 c0e9a350 c0b1d5b0 c12113c4 c0961e40 [ 3.917633] 7d80: c12113c4 40000113 eeff4bec c0ebe004 00000019 c0b1d230 ee9eeda8 60000113 [ 3.925791] 7da0: ee35d300 ee9eeda8 c07ce260 bb7ffb78 c07ce260 ee35d2c0 00000028 00000002 [ 3.933950] 7dc0: eeb76280 c118f884 ee0be640 c11c6128 c07ce260 c07ea4ac 00000000 c0962b48 [ 3.942108] 7de0: c118f868 00000001 c0ebbc98 ee35d2c0 00000000 eeb76280 00000000 c118f87c [ 3.950270] 7e00: ee35d2c0 00000000 c11c63e0 c118f694 00000019 c07ea5d0 ee0d7810 00000000 [ 3.958430] 7e20: c118f694 00000000 00000000 c07f2b0c c120f55c ee0d7810 c120f560 00000000 [ 3.966590] 7e40: 00000000 c07f08c4 c07f0e8c ee0d7810 c11ba3d0 ee0d7810 c118f694 c07f0e8c [ 3.974748] 7e60: c1108c48 00000001 c0ebc3cc c11c63f8 c11ba3d0 c07f0c08 00000001 c07f2f8c [ 3.982908] 7e80: c118f694 00000000 ee297ed4 c07f0e8c c1108c48 00000001 c0ebc3cc c11c63f8 [ 3.991068] 7ea0: c11ba3d0 c07ee8a0 c11ba3d0 ee82686c ee0baf38 bb7ffb78 ee0d7810 ee0d7810 [ 3.999227] 7ec0: c1108c48 ee0d7844 c118faac c07f05b0 ee0d7810 ee0d7810 00000001 bb7ffb78 [ 4.007389] 7ee0: ee0d7810 ee0d7810 c118fd18 c118faac c11c63e0 c07ef7d0 ee0d7810 c118fa90 [ 4.015548] 7f00: c118fa90 c07efd68 c118fac8 ee27fe00 eefd9c80 eefdcd00 00000000 c118facc [ 4.023708] 7f20: 00000000 c033c038 eefd9c80 eefd9c80 00000008 ee27fe00 ee27fe14 eefd9c80 [ 4.031866] 7f40: 00000008 c1103d00 eefd9c98 ee296000 eefd9c80 c033ce54 ee907eac c0b1d230 [ 4.040026] 7f60: ee907eac eea24440 ee285000 00000000 ee296000 ee27fe00 c033ce24 eea2445c [ 4.048188] 7f80: ee907eac c0341db0 00000000 ee285000 c0341c8c 00000000 00000000 00000000 [ 4.056346] 7fa0: 00000000 00000000 00000000 c03010e8 00000000 00000000 00000000 00000000 [ 4.064505] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 4.072665] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 4.080828] [] (msm_gem_map_vma) from [] (msm_gem_get_and_pin_iova+0xd8/0x134) [ 4.088983] [] (msm_gem_get_and_pin_iova) from [] (_msm_gem_kernel_new+0x38/0xac) [ 4.097839] [] (_msm_gem_kernel_new) from [] (msm_gem_kernel_new+0x24/0x2c) [ 4.107130] [] (msm_gem_kernel_new) from [] (dsi_tx_buf_alloc_6g+0x44/0x90) [ 4.115631] [] (dsi_tx_buf_alloc_6g) from [] (msm_dsi_host_modeset_init+0x80/0x104) [ 4.124313] [] (msm_dsi_host_modeset_init) from [] (msm_dsi_modeset_init+0x34/0x1c0) [ 4.133691] [] (msm_dsi_modeset_init) from [] (mdp5_kms_init+0x764/0x7e0) [ 4.143409] [] (mdp5_kms_init) from [] (msm_drm_bind+0x56c/0x740) [ 4.151824] [] (msm_drm_bind) from [] (try_to_bring_up_master+0x238/0x2b4) [ 4.159636] [] (try_to_bring_up_master) from [] (component_add+0xa8/0x170) [ 4.168146] [] (component_add) from [] (platform_drv_probe+0x48/0x9c) [ 4.176737] [] (platform_drv_probe) from [] (really_probe+0x278/0x404) [ 4.184981] [] (really_probe) from [] (driver_probe_device+0x78/0x1c0) [ 4.193147] [] (driver_probe_device) from [] (bus_for_each_drv+0x74/0xb8) [ 4.201389] [] (bus_for_each_drv) from [] (__device_attach+0xd0/0x164) [ 4.209984] [] (__device_attach) from [] (bus_probe_device+0x84/0x8c) [ 4.218143] [] (bus_probe_device) from [] (deferred_probe_work_func+0x48/0xc4) [ 4.226398] [] (deferred_probe_work_func) from [] (process_one_work+0x204/0x574) [ 4.235254] [] (process_one_work) from [] (worker_thread+0x30/0x560) [ 4.244534] [] (worker_thread) from [] (kthread+0x124/0x154) [ 4.252606] [] (kthread) from [] (ret_from_fork+0x14/0x2c) [ 4.259966] Exception stack(0xee297fb0 to 0xee297ff8) [ 4.266998] 7fa0: 00000000 00000000 00000000 00000000 [ 4.272143] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 4.280297] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 4.288451] Code: e5813080 1a000013 e3a03001 e5c4307c (e590009c) [ 4.294933] ---[ end trace 18729cc2bca2b4b3 ]--- Signed-off-by: Luca Weiss Signed-off-by: Rob Clark Signed-off-by: Rob Clark Signed-off-by: Sasha Levin commit 18a3357193c9b249261b48f503d342770eab0a02 Author: Sean Paul Date: Wed Jan 30 11:32:12 2019 -0500 drm/msm: dpu: Don't set frame_busy_mask for async updates [ Upstream commit f98baa3109cea46083d2361ab14a0207d1b1bd16 ] The frame_busy mask is used in frame_done event handling, which is not invoked for async commits. So an async commit will leave the frame_busy mask populated after it completes and future commits will start with the busy mask incorrect. This showed up on disable after cursor move. I was hitting the "this should not happen" comment in the frame event worker since frame_busy was set, we queued the event, but there were no frames pending (since async also doesn't set that). Reviewed-by: Fritz Koenig Signed-off-by: Sean Paul Link: https://patchwork.freedesktop.org/patch/msgid/20190130163220.138637-1-sean@poorly.run Signed-off-by: Rob Clark Signed-off-by: Sasha Levin commit f66ce9381b5a6c313f5739d9bb800a93946925d6 Author: Wen Yang Date: Thu Apr 4 00:04:11 2019 +0800 drm/msm: a5xx: fix possible object reference leak [ Upstream commit 6cd5235c3135ea84b32469ea51b2aae384eda8af ] The call to of_get_child_by_name returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: drivers/gpu/drm/msm/adreno/a5xx_gpu.c:57:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 47, but without a corresponding object release within this function. drivers/gpu/drm/msm/adreno/a5xx_gpu.c:66:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 47, but without a corresponding object release within this function. drivers/gpu/drm/msm/adreno/a5xx_gpu.c:118:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 47, but without a corresponding object release within this function. drivers/gpu/drm/msm/adreno/a5xx_gpu.c:57:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 51, but without a corresponding object release within this function. drivers/gpu/drm/msm/adreno/a5xx_gpu.c:66:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 51, but without a corresponding object release within this function. drivers/gpu/drm/msm/adreno/a5xx_gpu.c:118:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 51, but without a corresponding object release within this function. Signed-off-by: Wen Yang Cc: Rob Clark Cc: Sean Paul Cc: David Airlie Cc: Daniel Vetter Cc: Jordan Crouse Cc: Mamta Shukla Cc: Thomas Zimmermann Cc: Sharat Masetty Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org (open list) Reviewed-by: Jordan Crouse Signed-off-by: Rob Clark Signed-off-by: Rob Clark Signed-off-by: Sasha Levin commit 71d00e62d37ed5633152b1529d2e9a6aefa0967f Author: Jeykumar Sankaran Date: Wed Feb 13 17:19:12 2019 -0800 drm/msm/dpu: release resources on modeset failure [ Upstream commit a7fcc3237f31a4e206953bb73cf41bd429442f09 ] release resources allocated in mode_set if any of the hw check fails. Most of these checks are not necessary and they will be removed in the follow up patches with state based resource allocations. Signed-off-by: Jeykumar Sankaran Signed-off-by: Sean Paul Link: https://patchwork.freedesktop.org/patch/msgid/1550107156-17625-4-git-send-email-jsanka@codeaurora.org Signed-off-by: Rob Clark Signed-off-by: Sasha Levin commit 71bc990fe23b619695b166adb202e81e43880ac8 Author: Nicholas Mc Guire Date: Fri Apr 19 01:31:08 2019 +0200 staging: vc04_services: handle kzalloc failure [ Upstream commit a5112277872a56017b777770e2fd4324d4a6c866 ] The kzalloc here was being used without checking the return - if the kzalloc fails return VCHIQ_ERROR. The call-site of vchiq_platform_init_state() vchiq_init_state() was not responding to an allocation failure so checks for != VCHIQ_SUCCESS and pass VCHIQ_ERROR up to vchiq_platform_init() which then will fail with -EINVAL. Signed-off-by: Nicholas Mc Guire Reported-by: kbuild test robot Acked-By: Stefan Wahren Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 2cf38d686bd34aece2403079ba4799251610df34 Author: Konstantin Khlebnikov Date: Wed Feb 27 11:10:18 2019 +0300 sched/core: Handle overflow in cpu_shares_write_u64 [ Upstream commit 5b61d50ab4ef590f5e1d4df15cd2cea5f5715308 ] Bit shift in scale_load() could overflow shares. This patch saturates it to MAX_SHARES like following sched_group_set_shares(). Example: # echo 9223372036854776832 > cpu.shares # cat cpu.shares Before patch: 1024 After pattch: 262144 Signed-off-by: Konstantin Khlebnikov Acked-by: Peter Zijlstra Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/155125501891.293431.3345233332801109696.stgit@buzz Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin commit 7dff75508ccbaaad6c6f0b9150c17342af572262 Author: Konstantin Khlebnikov Date: Wed Feb 27 11:10:17 2019 +0300 sched/rt: Check integer overflow at usec to nsec conversion [ Upstream commit 1a010e29cfa00fee2888fd2fd4983f848cbafb58 ] Example of unhandled overflows: # echo 18446744073709651 > cpu.rt_runtime_us # cat cpu.rt_runtime_us 99 # echo 18446744073709900 > cpu.rt_period_us # cat cpu.rt_period_us 348 After this patch they will fail with -EINVAL. Signed-off-by: Konstantin Khlebnikov Acked-by: Peter Zijlstra Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/155125501739.293431.5252197504404771496.stgit@buzz Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin commit 98cf1382939808209657e9a9c8cd62ae3cadf5d2 Author: Konstantin Khlebnikov Date: Wed Feb 27 11:10:20 2019 +0300 sched/core: Check quota and period overflow at usec to nsec conversion [ Upstream commit 1a8b4540db732ca16c9e43ac7c08b1b8f0b252d8 ] Large values could overflow u64 and pass following sanity checks. # echo 18446744073750000 > cpu.cfs_period_us # cat cpu.cfs_period_us 40448 # echo 18446744073750000 > cpu.cfs_quota_us # cat cpu.cfs_quota_us 40448 After this patch they will fail with -EINVAL. Signed-off-by: Konstantin Khlebnikov Acked-by: Peter Zijlstra Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/155125502079.293431.3947497929372138600.stgit@buzz Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin commit eab336b76e6b6ac17903cc3a6d204885f84a2a2d Author: Roman Gushchin Date: Fri Apr 19 10:03:03 2019 -0700 cgroup: protect cgroup->nr_(dying_)descendants by css_set_lock [ Upstream commit 4dcabece4c3a9f9522127be12cc12cc120399b2f ] The number of descendant cgroups and the number of dying descendant cgroups are currently synchronized using the cgroup_mutex. The number of descendant cgroups will be required by the cgroup v2 freezer, which will use it to determine if a cgroup is frozen (depending on total number of descendants and number of frozen descendants). It's not always acceptable to grab the cgroup_mutex, especially from quite hot paths (e.g. exit()). To avoid this, let's additionally synchronize these counters using the css_set_lock. So, it's safe to read these counters with either cgroup_mutex or css_set_lock locked, and for changing both locks should be acquired. Signed-off-by: Roman Gushchin Signed-off-by: Tejun Heo Cc: kernel-team@fb.com Signed-off-by: Sasha Levin commit d6c68321e7856a247672205a33a61f6c668ac070 Author: Sebastian Andrzej Siewior Date: Sat Apr 20 00:09:51 2019 -0400 random: add a spinlock_t to struct batched_entropy [ Upstream commit b7d5dc21072cda7124d13eae2aefb7343ef94197 ] The per-CPU variable batched_entropy_uXX is protected by get_cpu_var(). This is just a preempt_disable() which ensures that the variable is only from the local CPU. It does not protect against users on the same CPU from another context. It is possible that a preemptible context reads slot 0 and then an interrupt occurs and the same value is read again. The above scenario is confirmed by lockdep if we add a spinlock: | ================================ | WARNING: inconsistent lock state | 5.1.0-rc3+ #42 Not tainted | -------------------------------- | inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. | ksoftirqd/9/56 [HC0[0]:SC1[1]:HE0:SE0] takes: | (____ptrval____) (batched_entropy_u32.lock){+.?.}, at: get_random_u32+0x3e/0xe0 | {SOFTIRQ-ON-W} state was registered at: | _raw_spin_lock+0x2a/0x40 | get_random_u32+0x3e/0xe0 | new_slab+0x15c/0x7b0 | ___slab_alloc+0x492/0x620 | __slab_alloc.isra.73+0x53/0xa0 | kmem_cache_alloc_node+0xaf/0x2a0 | copy_process.part.41+0x1e1/0x2370 | _do_fork+0xdb/0x6d0 | kernel_thread+0x20/0x30 | kthreadd+0x1ba/0x220 | ret_from_fork+0x3a/0x50 … | other info that might help us debug this: | Possible unsafe locking scenario: | | CPU0 | ---- | lock(batched_entropy_u32.lock); | | lock(batched_entropy_u32.lock); | | *** DEADLOCK *** | | stack backtrace: | Call Trace: … | kmem_cache_alloc_trace+0x20e/0x270 | ipmi_alloc_recv_msg+0x16/0x40 … | __do_softirq+0xec/0x48d | run_ksoftirqd+0x37/0x60 | smpboot_thread_fn+0x191/0x290 | kthread+0xfe/0x130 | ret_from_fork+0x3a/0x50 Add a spinlock_t to the batched_entropy data structure and acquire the lock while accessing it. Acquire the lock with disabled interrupts because this function may be used from interrupt context. Remove the batched_entropy_reset_lock lock. Now that we have a lock for the data scructure, we can access it from a remote CPU. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin commit 2089644fc4534bc8e425f04e4ae9a2a1fcbdcc69 Author: Jon DeVree Date: Fri Apr 19 23:35:16 2019 -0400 random: fix CRNG initialization when random.trust_cpu=1 [ Upstream commit fe6f1a6a8eedc1aa538fee0baa612b6a59639cf8 ] When the system boots with random.trust_cpu=1 it doesn't initialize the per-NUMA CRNGs because it skips the rest of the CRNG startup code. This means that the code from 1e7f583af67b ("random: make /dev/urandom scalable for silly userspace programs") is not used when random.trust_cpu=1. crash> dmesg | grep random: [ 0.000000] random: get_random_bytes called from start_kernel+0x94/0x530 with crng_init=0 [ 0.314029] random: crng done (trusting CPU's manufacturer) crash> print crng_node_pool $6 = (struct crng_state **) 0x0 After adding the missing call to numa_crng_init() the per-NUMA CRNGs are initialized again: crash> dmesg | grep random: [ 0.000000] random: get_random_bytes called from start_kernel+0x94/0x530 with crng_init=0 [ 0.314031] random: crng done (trusting CPU's manufacturer) crash> print crng_node_pool $1 = (struct crng_state **) 0xffff9a915f4014a0 The call to invalidate_batched_entropy() was also missing. This is important for architectures like PPC and S390 which only have the arch_get_random_seed_* functions. Fixes: 39a8883a2b98 ("random: add a config option to trust the CPU's hwrng") Signed-off-by: Jon DeVree Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin commit 8c54b4088fc29a83aa262a132d36739cedfcb11e Author: Russell Currey Date: Wed Mar 27 14:35:54 2019 +1100 powerpc/64: Fix booting large kernels with STRICT_KERNEL_RWX [ Upstream commit 56c46bba9bbfe229b4472a5be313c44c5b714a39 ] With STRICT_KERNEL_RWX enabled anything marked __init is placed at a 16M boundary. This is necessary so that it can be repurposed later with different permissions. However, in kernels with text larger than 16M, this pushes early_setup past 32M, incapable of being reached by the branch instruction. Fix this by setting the CTR and branching there instead. Fixes: 1e0fc9d1eb2b ("powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs") Signed-off-by: Russell Currey [mpe: Fix it to work on BE by using DOTSYM()] Signed-off-by: Michael Ellerman Signed-off-by: Sasha Levin commit dbfe04574b06ad16efae9127a48d7aa84f74a365 Author: Nathan Lynch Date: Thu Apr 18 13:56:57 2019 -0500 powerpc/numa: improve control of topology updates [ Upstream commit 2d4d9b308f8f8dec68f6dbbff18c68ec7c6bd26f ] When booted with "topology_updates=no", or when "off" is written to /proc/powerpc/topology_updates, NUMA reassignments are inhibited for PRRN and VPHN events. However, migration and suspend unconditionally re-enable reassignments via start_topology_update(). This is incoherent. Check the topology_updates_enabled flag in start/stop_topology_update() so that callers of those APIs need not be aware of whether reassignments are enabled. This allows the administrative decision on reassignments to remain in force across migrations and suspensions. Signed-off-by: Nathan Lynch Signed-off-by: Michael Ellerman Signed-off-by: Sasha Levin commit 4f305a3d5f30b1527a793b50002ded8d2ccd5ad7 Author: Yufen Yu Date: Tue Apr 2 20:06:34 2019 +0800 block: fix use-after-free on gendisk [ Upstream commit 2c88e3c7ec32d7a40cc7c9b4a487cf90e4671bdd ] commit 2da78092dda "block: Fix dev_t minor allocation lifetime" specifically moved blk_free_devt(dev->devt) call to part_release() to avoid reallocating device number before the device is fully shutdown. However, it can cause use-after-free on gendisk in get_gendisk(). We use md device as example to show the race scenes: Process1 Worker Process2 md_free blkdev_open del_gendisk add delete_partition_work_fn() to wq __blkdev_get get_gendisk put_disk disk_release kfree(disk) find part from ext_devt_idr get_disk_and_module(disk) cause use after free delete_partition_work_fn put_device(part) part_release remove part from ext_devt_idr Before is removed from ext_devt_idr by delete_partition_work_fn(), we can find the devt and then access gendisk by hd_struct pointer. But, if we access the gendisk after it have been freed, it can cause in use-after-freeon gendisk in get_gendisk(). We fix this by adding a new helper blk_invalidate_devt() in delete_partition() and del_gendisk(). It replaces hd_struct pointer in idr with value 'NULL', and deletes the entry from idr in part_release() as we do now. Thanks to Jan Kara for providing the solution and more clear comments for the code. Fixes: 2da78092dda1 ("block: Fix dev_t minor allocation lifetime") Cc: Al Viro Reviewed-by: Bart Van Assche Reviewed-by: Keith Busch Reviewed-by: Jan Kara Suggested-by: Jan Kara Signed-off-by: Yufen Yu Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit 15e048afc5a6f677e755bcbe25bd75bde8730061 Author: Fabrice Gasnier Date: Mon Apr 15 15:00:50 2019 +0200 iio: adc: stm32-dfsdm: fix unmet direct dependencies detected [ Upstream commit ba7ecfe43d6bf12e2aa76705c45f7d187ae3d7c0 ] This fixes unmet direct dependencies seen when CONFIG_STM32_DFSDM_ADC is selected: WARNING: unmet direct dependencies detected for IIO_BUFFER_HW_CONSUMER Depends on [n]: IIO [=y] && IIO_BUFFER [=n] Selected by [y]: - STM32_DFSDM_ADC [=y] && IIO [=y] && (ARCH_STM32 [=y] && OF [=y] || COMPILE_TEST [=n]) Fixes: e2e6771c6462 ("IIO: ADC: add STM32 DFSDM sigma delta ADC support") Signed-off-by: Fabrice Gasnier Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin commit a09b5b919f21cc65327990a49d50c2aa751302b2 Author: Dan Carpenter Date: Mon Apr 8 05:52:38 2019 -0400 media: pvrusb2: Prevent a buffer overflow [ Upstream commit c1ced46c7b49ad7bc064e68d966e0ad303f917fb ] The ctrl_check_input() function is called from pvr2_ctrl_range_check(). It's supposed to validate user supplied input and return true or false depending on whether the input is valid or not. The problem is that negative shifts or shifts greater than 31 are undefined in C. In practice with GCC they result in shift wrapping so this function returns true for some inputs which are not valid and this could result in a buffer overflow: drivers/media/usb/pvrusb2/pvrusb2-ctrl.c:205 pvr2_ctrl_get_valname() warn: uncapped user index 'names[val]' The cptr->hdw->input_allowed_mask mask is configured in pvr2_hdw_create() and the highest valid bit is BIT(4). Fixes: 7fb20fa38caa ("V4L/DVB (7299): pvrusb2: Improve logic which handles input choice availability") Signed-off-by: Dan Carpenter Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit b0b28a0bc04a42ab6aaa76be9c90af22563dc3f6 Author: Shuah Khan Date: Mon Apr 1 20:43:17 2019 -0400 media: au0828: Fix NULL pointer dereference in au0828_analog_stream_enable() [ Upstream commit 898bc40bfcc26abb6e06e960d6d4754c36c58b50 ] Fix au0828_analog_stream_enable() to check if device is in the right state first. When unbind happens while bind is in progress, usbdev pointer could be invalid in au0828_analog_stream_enable() and a call to usb_ifnum_to_if() will result in the null pointer dereference. This problem is found with the new media_dev_allocator.sh test. kernel: [ 590.359623] BUG: unable to handle kernel NULL pointer dereference at 00000000000004e8 kernel: [ 590.359627] #PF error: [normal kernel read fault] kernel: [ 590.359629] PGD 0 P4D 0 kernel: [ 590.359632] Oops: 0000 [#1] SMP PTI kernel: [ 590.359634] CPU: 3 PID: 1458 Comm: v4l_id Not tainted 5.1.0-rc2+ #30 kernel: [ 590.359636] Hardware name: Dell Inc. OptiPlex 7 90/0HY9JP, BIOS A18 09/24/2013 kernel: [ 590.359641] RIP: 0010:usb_ifnum_to_if+0x6/0x60 kernel: [ 590.359643] Code: 5d 41 5e 41 5f 5d c3 48 83 c4 10 b8 fa ff ff ff 5b 41 5c 41 5d 41 5e 41 5f 5d c3 b8 fa ff ff ff c3 0f 1f 00 6 6 66 66 66 90 55 <48> 8b 97 e8 04 00 00 48 89 e5 48 85 d2 74 41 0f b6 4a 04 84 c 9 74 kernel: [ 590.359645] RSP: 0018:ffffad3cc3c1fc00 EFLAGS: 00010246 kernel: [ 590.359646] RAX: 0000000000000000 RBX: ffff8ded b1f3c000 RCX: 1f377e4500000000 kernel: [ 590.359648] RDX: ffff8dedfa3a6b50 RSI: 00000000 00000000 RDI: 0000000000000000 kernel: [ 590.359649] RBP: ffffad3cc3c1fc28 R08: 00000000 8574acc2 R09: ffff8dedfa3a6b50 kernel: [ 590.359650] R10: 0000000000000001 R11: 00000000 00000000 R12: 0000000000000000 kernel: [ 590.359652] R13: ffff8dedb1f3f0f0 R14: ffffffff adcf7ec0 R15: 0000000000000000 kernel: [ 590.359654] FS: 00007f7917198540(0000) GS:ffff 8dee258c0000(0000) knlGS:0000000000000000 kernel: [ 590.359655] CS: 0010 DS: 0000 ES: 0000 CR0: 00 00000080050033 kernel: [ 590.359657] CR2: 00000000000004e8 CR3: 00000001 a388e002 CR4: 00000000000606e0 kernel: [ 590.359658] Call Trace: kernel: [ 590.359664] ? au0828_analog_stream_enable+0x2c/0x180 kernel: [ 590.359666] au0828_v4l2_open+0xa4/0x110 kernel: [ 590.359670] v4l2_open+0x8b/0x120 kernel: [ 590.359674] chrdev_open+0xa6/0x1c0 kernel: [ 590.359676] ? cdev_put.part.3+0x20/0x20 kernel: [ 590.359678] do_dentry_open+0x1f6/0x360 kernel: [ 590.359681] vfs_open+0x2f/0x40 kernel: [ 590.359684] path_openat+0x299/0xc20 kernel: [ 590.359688] do_filp_open+0x9b/0x110 kernel: [ 590.359695] ? _raw_spin_unlock+0x27/0x40 kernel: [ 590.359697] ? __alloc_fd+0xb2/0x160 kernel: [ 590.359700] do_sys_open+0x1ba/0x260 kernel: [ 590.359702] ? do_sys_open+0x1ba/0x260 kernel: [ 590.359712] __x64_sys_openat+0x20/0x30 kernel: [ 590.359715] do_syscall_64+0x5a/0x120 kernel: [ 590.359718] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by: Shuah Khan Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 6e4a22993b09c16e7194ce528efc49e2be3152f1 Author: Hugues Fruchet Date: Mon Apr 1 04:56:09 2019 -0400 media: stm32-dcmi: fix crash when subdev do not expose any formats [ Upstream commit 33dfeb62e23c31619d2197850f7e8b50e8cc5466 ] Do not access sd_formats[] if num_of_sd_formats is zero, ie subdev sensor didn't expose any formats. Signed-off-by: Hugues Fruchet Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 3a7a701d18b0e21996b8115e1e581ff9d95ac2bc Author: Wenwen Wang Date: Fri Apr 19 20:49:29 2019 -0500 audit: fix a memory leak bug [ Upstream commit 70c4cf17e445264453bc5323db3e50aa0ac9e81f ] In audit_rule_change(), audit_data_to_entry() is firstly invoked to translate the payload data to the kernel's rule representation. In audit_data_to_entry(), depending on the audit field type, an audit tree may be created in audit_make_tree(), which eventually invokes kmalloc() to allocate the tree. Since this tree is a temporary tree, it will be then freed in the following execution, e.g., audit_add_rule() if the message type is AUDIT_ADD_RULE or audit_del_rule() if the message type is AUDIT_DEL_RULE. However, if the message type is neither AUDIT_ADD_RULE nor AUDIT_DEL_RULE, i.e., the default case of the switch statement, this temporary tree is not freed. To fix this issue, only allocate the tree when the type is AUDIT_ADD_RULE or AUDIT_DEL_RULE. Signed-off-by: Wenwen Wang Reviewed-by: Richard Guy Briggs Signed-off-by: Paul Moore Signed-off-by: Sasha Levin commit 5d0102cd1a908a1c4d773929ec0d490f8f1e40a9 Author: Akinobu Mita Date: Sat Mar 30 10:01:31 2019 -0400 media: ov2659: make S_FMT succeed even if requested format doesn't match [ Upstream commit bccb89cf9cd07a0690d519696a00c00a973b3fe4 ] This driver returns an error if unsupported media bus pixel code is requested by VIDIOC_SUBDEV_S_FMT. But according to Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst, Drivers must not return an error solely because the requested format doesn't match the device capabilities. They must instead modify the format to match what the hardware can provide. So select default format code and return success in that case. This is detected by v4l2-compliance. Cc: "Lad, Prabhakar" Signed-off-by: Akinobu Mita Acked-by: Lad, Prabhakar Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit a9176dab8898fa7ae611e2c4743e1ee7544f7cba Author: Hans Verkuil Date: Tue Apr 2 03:24:15 2019 -0400 media: au0828: stop video streaming only when last user stops [ Upstream commit f604f0f5afb88045944567f604409951b5eb6af8 ] If the application was streaming from both videoX and vbiX, and streaming from videoX was stopped, then the vbi streaming also stopped. The cause being that stop_streaming for video stopped the subdevs as well, instead of only doing that if dev->streaming_users reached 0. au0828_stop_vbi_streaming was also wrong since it didn't stop the subdevs at all when dev->streaming_users reached 0. Signed-off-by: Hans Verkuil Tested-by: Shuah Khan Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 8d082dcc5150d75583cf0c427b83585e1581db39 Author: Janusz Krzysztofik Date: Fri Mar 29 21:06:09 2019 -0400 media: ov6650: Move v4l2_clk_get() to ov6650_video_probe() helper [ Upstream commit ccdd85d518d8b9320ace1d87271f0ba2175f21fa ] In preparation for adding asynchronous subdevice support to the driver, don't acquire v4l2_clk from the driver .probe() callback as that may fail if the clock is provided by a bridge driver which may be not yet initialized. Move the v4l2_clk_get() to ov6650_video_probe() helper which is going to be converted to v4l2_subdev_internal_ops.registered() callback, executed only when the bridge driver is ready. Signed-off-by: Janusz Krzysztofik Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 33742fccc0c8d28ca75c9375a771fb9e7e4dd391 Author: Philipp Zabel Date: Mon Apr 8 08:32:49 2019 -0400 media: coda: clear error return value before picture run [ Upstream commit bbeefa7357a648afe70e7183914c87c3878d528d ] The error return value is not written by some firmware codecs, such as MPEG-2 decode on CodaHx4. Clear the error return value before starting the picture run to avoid misinterpreting unrelated values returned by sequence initialization as error return value. Signed-off-by: Philipp Zabel Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 5509ba411b9b9ba6ac94d205b8b1e541a56174ae Author: Nicolas Ferre Date: Wed Apr 3 12:23:57 2019 +0200 dmaengine: at_xdmac: remove BUG_ON macro in tasklet [ Upstream commit e2c114c06da2d9ffad5b16690abf008d6696f689 ] Even if this case shouldn't happen when controller is properly programmed, it's still better to avoid dumping a kernel Oops for this. As the sequence may happen only for debugging purposes, log the error and just finish the tasklet call. Signed-off-by: Nicolas Ferre Acked-by: Ludovic Desroches Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin commit 498460266b614b2cf7fc3ea3b4745636d8bd655a Author: Robin Murphy Date: Tue Apr 16 16:24:24 2019 +0100 perf/arm-cci: Remove broken race mitigation [ Upstream commit 0d2e2a82d4de298d006bf8eddc86829e3c7da820 ] Uncore PMU drivers face an awkward cyclic dependency wherein: - They have to pick a valid online CPU to associate with before registering the PMU device, since it will get exposed to userspace immediately. - The PMU registration has to be be at least partly complete before hotplug events can be handled, since trying to migrate an uninitialised context would be bad. - The hotplug handler has to be ready as soon as a CPU is chosen, lest it go offline without the user-visible cpumask value getting updated. The arm-cci driver has tried to solve this by using get_cpu() to pick the current CPU and prevent it from disappearing while both registrations are performed, but that results in taking mutexes with preemption disabled, which makes certain configurations very unhappy: [ 1.983337] BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:2004 [ 1.983340] in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: swapper/0 [ 1.983342] Preemption disabled at: [ 1.983353] [] cci_pmu_probe+0x1dc/0x488 [ 1.983360] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.18.20-rt8-yocto-preempt-rt #1 [ 1.983362] Hardware name: ZynqMP ZCU102 Rev1.0 (DT) [ 1.983364] Call trace: [ 1.983369] dump_backtrace+0x0/0x158 [ 1.983372] show_stack+0x24/0x30 [ 1.983378] dump_stack+0x80/0xa4 [ 1.983383] ___might_sleep+0x138/0x160 [ 1.983386] __might_sleep+0x58/0x90 [ 1.983391] __rt_mutex_lock_state+0x30/0xc0 [ 1.983395] _mutex_lock+0x24/0x30 [ 1.983400] perf_pmu_register+0x2c/0x388 [ 1.983404] cci_pmu_probe+0x2bc/0x488 [ 1.983409] platform_drv_probe+0x58/0xa8 It is not feasible to resolve all the possible races outside of the perf core itself, so address the immediate bug by following the example of nearly every other PMU driver and not even trying to do so. Registering the hotplug notifier first should minimise the window in which things can go wrong, so that's about as much as we can reasonably do here. This also revealed an additional race in assigning the global pointer too late relative to the hotplug notifier, which gets fixed in the process. Reported-by: Li, Meng Tested-by: Corentin Labbe Reviewed-by: Suzuki K Poulose Signed-off-by: Robin Murphy Signed-off-by: Will Deacon Signed-off-by: Sasha Levin commit a7171d4225d9dc3ec4c355e911afcf7d18e514fc Author: Douglas Anderson Date: Fri Apr 12 09:17:47 2019 -0700 clk: rockchip: undo several noc and special clocks as critical on rk3288 [ Upstream commit f4033db5b84ebe4b32c25ba2ed65ab20b628996a ] This is mostly a revert of commit 55bb6a633c33 ("clk: rockchip: mark noc and some special clk as critical on rk3288") except that we're keeping "pmu_hclk_otg0" as critical still. NOTE: turning these clocks off doesn't seem to do a whole lot in terms of power savings (checking the power on the logic rail). It appears to save maybe 1-2mW. ...but still it seems like we should turn the clocks off if they aren't needed. About "pmu_hclk_otg0" (the one clock from the original commit we're still keeping critical) from an email thread: > pmu ahb clock > > Function: Clock to pmu module when hibernation and/or ADP is > enabled. Must be greater than or equal to 30 MHz. > > If the SOC design does not support hibernation/ADP function, only have > hclk_otg, this clk can be switched according to the usage of otg. > If the SOC design support hibernation/ADP, has two clocks, hclk_otg and > pmu_hclk_otg0. > Hclk_otg belongs to the closed part of otg logic, which can be switched > according to the use of otg. > > pmu_hclk_otg0 belongs to the always on part. > > As for whether pmu_hclk_otg0 can be turned off when otg is not in use, > we have not tested. IC suggest make pmu_hclk_otg0 always on. For the rest of the clocks: atclk: No documentation about this clock other than that it goes to the CPU. CPU functions fine without it on. Maybe needed for JTAG? jtag: Presumably this clock is only needed if you're debugging with JTAG. It doesn't seem like it makes sense to waste power for every rk3288 user. In any case to do JTAG you'd need private patches to adjust the pinctrl the mux the JTAG out anyway. pclk_dbg, pclk_core_niu: On veyron Chromebooks we turn these two clocks on only during kernel panics in order to access some coresight registers. Since nothing in the upstream kernel does this we should be able to leave them off safely. Maybe also needed for JTAG? hsicphy12m_xin12m: There is no indication of why this clock would need to be turned on for boards that don't use HSIC. pclk_ddrupctl[0-1], pclk_publ0[0-1]: On veyron Chromebooks we turn these 4 clocks on only when doing DDR transitions and they are off otherwise. I see no reason why they'd need to be on in the upstream kernel which doesn't support DDRFreq. Signed-off-by: Douglas Anderson Reviewed-by: Elaine Zhang Signed-off-by: Heiko Stuebner Signed-off-by: Sasha Levin commit 0feb0be6a43d1b352f802065afb4bc02f155c828 Author: Wen Yang Date: Fri Apr 12 14:02:22 2019 +0800 pinctrl: samsung: fix leaked of_node references [ Upstream commit 44b9f86cd41db6c522effa5aec251d664a52fbc0 ] The call to of_find_compatible_node returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/pinctrl/samsung/pinctrl-exynos-arm.c:76:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 66, but without a corresponding object release within this function. ./drivers/pinctrl/samsung/pinctrl-exynos-arm.c:82:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 66, but without a corresponding object release within this function. Signed-off-by: Wen Yang Cc: Linus Walleij Cc: Tomasz Figa Cc: Sylwester Nawrocki Cc: Kukjin Kim Cc: linux-samsung-soc@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Krzysztof Kozlowski Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin commit 40f726291793a5403be98331ac276b17b9240c04 Author: Wen Yang Date: Fri Apr 12 14:02:21 2019 +0800 pinctrl: st: fix leaked of_node references [ Upstream commit 483d70d73beaecab55882fcd2a357af72674e24c ] The call to of_get_child_by_name returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/pinctrl/pinctrl-st.c:1188:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1175, but without a corresponding object release within this function. ./drivers/pinctrl/pinctrl-st.c:1188:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1175, but without a corresponding object release within this function. ./drivers/pinctrl/pinctrl-st.c:1199:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1175, but without a corresponding object release within this function. ./drivers/pinctrl/pinctrl-st.c:1199:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1175, but without a corresponding object release within this function. Signed-off-by: Wen Yang Cc: Patrice Chotard Cc: Linus Walleij Cc: linux-gpio@vger.kernel.org Cc: linux-kernel@vger.kernel.org (open list) Reviewed-by: Patrice Chotard Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin commit df16aae712d14f91728ecbf5b3f59ebbffa5b82f Author: Wen Yang Date: Fri Apr 12 14:02:19 2019 +0800 pinctrl: pistachio: fix leaked of_node references [ Upstream commit 44a4455ac2c6b0981eace683a2b6eccf47689022 ] The call to of_get_child_by_name returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/pinctrl/pinctrl-pistachio.c:1422:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1360, but without a corresponding object release within this function. Signed-off-by: Wen Yang Cc: Linus Walleij Cc: linux-gpio@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin commit 801f4dd9ea6ab644baf45978218896a4ca225b94 Author: Hans de Goede Date: Sat Apr 20 13:22:10 2019 +0200 HID: logitech-hidpp: use RAP instead of FAP to get the protocol version [ Upstream commit 096377525cdb8251e4656085efc988bdf733fb4c ] According to the logitech_hidpp_2.0_specification_draft_2012-06-04.pdf doc: https://lekensteyn.nl/files/logitech/logitech_hidpp_2.0_specification_draft_2012-06-04.pdf We should use a register-access-protocol request using the short input / output report ids. This is necessary because 27MHz HID++ receivers have a max-packetsize on their HIP++ endpoint of 8, so they cannot support long reports. Using a feature-access-protocol request (which is always long or very-long) with these will cause a timeout error, followed by the hidpp driver treating the device as not being HID++ capable. This commit fixes this by switching to using a rap request to get the protocol version. Besides being tested with a (046d:c517) 27MHz receiver with various 27MHz keyboards and mice, this has also been tested to not cause regressions on a non-unifying dual-HID++ nano receiver (046d:c534) with k270 and m185 HID++-2.0 devices connected and on a unifying/dj receiver (046d:c52b) with a HID++-2.0 Logitech Rechargeable Touchpad T650. Signed-off-by: Hans de Goede Signed-off-by: Benjamin Tissoires Signed-off-by: Sasha Levin commit 13c8183154a39dc6ac045897e2da65ab6e4e219d Author: Ferry Toth Date: Tue Apr 9 16:15:50 2019 +0200 Bluetooth: btbcm: Add default address for BCM43341B [ Upstream commit 5035726128cd2e3813ee44deedb9898509edb232 ] The BCM43341B has the default MAC address 43:34:1B:00:1F:AC if none is given. This address was found when enabling Bluetooth on multiple Intel Edison modules. It also contains the sequence 43341B, the name the chip identifies itself as. Using the same BD_ADDR is problematic when having multiple Intel Edison modules in each others range. The default address also has the LAA (locally administered address) bit set which prevents a BNEP device from being created, needed for BT tethering. Add this to the list of black listed default MAC addresses and let the user configure a valid one using f.i. `btmgmt -i hci0 public-addr xx:xx:xx:xx:xx:xx` Suggested-by: Andy Shevchenko Signed-off-by: Ferry Toth Reviewed-by: Andy Shevchenko Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin commit d05bd365e36cd815bd40277163da7341d5f25f80 Author: Balakrishna Godavarthi Date: Mon Apr 1 15:19:08 2019 +0530 Bluetooth: hci_qca: Give enough time to ROME controller to bootup. [ Upstream commit 7f09d5a6c33be66a5ca19bf9dd1c2d90c5dfcf0d ] This patch enables enough time to ROME controller to bootup after we bring the enable pin out of reset. Fixes: 05ba533c5c11 ("Bluetooth: hci_qca: Add serdev support"). Signed-off-by: Balakrishna Godavarthi Reviewed-by: Rocky Liao Tested-by: Rocky Liao Tested-by: Claire Chang Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin commit 200aa576a8cdf81a724dfb1d73dc8998ccab1d6a Author: Peter Zijlstra Date: Wed Apr 24 09:19:25 2019 +0200 mm/uaccess: Use 'unsigned long' to placate UBSAN warnings on older GCC versions [ Upstream commit 29da93fea3ea39ab9b12270cc6be1b70ef201c9e ] Randy reported objtool triggered on his (GCC-7.4) build: lib/strncpy_from_user.o: warning: objtool: strncpy_from_user()+0x315: call to __ubsan_handle_add_overflow() with UACCESS enabled lib/strnlen_user.o: warning: objtool: strnlen_user()+0x337: call to __ubsan_handle_sub_overflow() with UACCESS enabled This is due to UBSAN generating signed-overflow-UB warnings where it should not. Prior to GCC-8 UBSAN ignored -fwrapv (which the kernel uses through -fno-strict-overflow). Make the functions use 'unsigned long' throughout. Reported-by: Randy Dunlap Signed-off-by: Peter Zijlstra (Intel) Acked-by: Randy Dunlap # build-tested Acked-by: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: luto@kernel.org Link: http://lkml.kernel.org/r/20190424072208.754094071@infradead.org Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin commit c5b7ac2ec77968614277576585750acf7fddfd79 Author: Jiri Kosina Date: Wed Apr 24 09:04:57 2019 +0200 x86/mm: Remove in_nmi() warning from 64-bit implementation of vmalloc_fault() [ Upstream commit a65c88e16f32aa9ef2e8caa68ea5c29bd5eb0ff0 ] In-NMI warnings have been added to vmalloc_fault() via: ebc8827f75 ("x86: Barf when vmalloc and kmemcheck faults happen in NMI") back in the time when our NMI entry code could not cope with nested NMIs. These days, it's perfectly fine to take a fault in NMI context and we don't have to care about the fact that IRET from the fault handler might cause NMI nesting. This warning has already been removed from 32-bit implementation of vmalloc_fault() in: 6863ea0cda8 ("x86/mm: Remove in_nmi() warning from vmalloc_fault()") but the 64-bit version was omitted. Remove the bogus warning also from 64-bit implementation of vmalloc_fault(). Reported-by: Nicolai Stange Signed-off-by: Jiri Kosina Acked-by: Peter Zijlstra (Intel) Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Dave Hansen Cc: Frederic Weisbecker Cc: Joerg Roedel Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Fixes: 6863ea0cda8 ("x86/mm: Remove in_nmi() warning from vmalloc_fault()") Link: http://lkml.kernel.org/r/nycvar.YFH.7.76.1904240902280.9803@cbobk.fhfr.pm Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin commit 9096a8a2f81c0486e099d71248569b41e3f40555 Author: Peter Zijlstra Date: Wed Apr 24 09:19:24 2019 +0200 x86/uaccess: Dont leak the AC flag into __put_user() argument evaluation [ Upstream commit 6ae865615fc43d014da2fd1f1bba7e81ee622d1b ] The __put_user() macro evaluates it's @ptr argument inside the __uaccess_begin() / __uaccess_end() region. While this would normally not be expected to be an issue, an UBSAN bug (it ignored -fwrapv, fixed in GCC 8+) would transform the @ptr evaluation for: drivers/gpu/drm/i915/i915_gem_execbuffer.c: if (unlikely(__put_user(offset, &urelocs[r-stack].presumed_offset))) { into a signed-overflow-UB check and trigger the objtool AC validation. Finish this commit: 2a418cf3f5f1 ("x86/uaccess: Don't leak the AC flag into __put_user() value evaluation") and explicitly evaluate all 3 arguments early. Reported-by: Randy Dunlap Signed-off-by: Peter Zijlstra (Intel) Acked-by: Randy Dunlap # build-tested Acked-by: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: luto@kernel.org Fixes: 2a418cf3f5f1 ("x86/uaccess: Don't leak the AC flag into __put_user() value evaluation") Link: http://lkml.kernel.org/r/20190424072208.695962771@infradead.org Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin commit c81914be4444028c62bf1d61813581e0b6122eea Author: Sebastian Andrzej Siewior Date: Wed Apr 24 10:52:53 2019 +0200 smpboot: Place the __percpu annotation correctly [ Upstream commit d4645d30b50d1691c26ff0f8fa4e718b08f8d3bb ] The test robot reported a wrong assignment of a per-CPU variable which it detected by using sparse and sent a report. The assignment itself is correct. The annotation for sparse was wrong and hence the report. The first pointer is a "normal" pointer and points to the per-CPU memory area. That means that the __percpu annotation has to be moved. Move the __percpu annotation to pointer which points to the per-CPU area. This change affects only the sparse tool (and is ignored by the compiler). Reported-by: kbuild test robot Signed-off-by: Sebastian Andrzej Siewior Cc: Linus Torvalds Cc: Paul E. McKenney Cc: Peter Zijlstra Cc: Thomas Gleixner Fixes: f97f8f06a49fe ("smpboot: Provide infrastructure for percpu hotplug threads") Link: http://lkml.kernel.org/r/20190424085253.12178-1-bigeasy@linutronix.de Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin commit 2e79106b9c784b4c0f644214cae5d62f135e5d35 Author: Kees Cook Date: Tue Apr 23 11:38:27 2019 -0700 x86/build: Move _etext to actual end of .text [ Upstream commit 392bef709659abea614abfe53cf228e7a59876a4 ] When building x86 with Clang LTO and CFI, CFI jump regions are automatically added to the end of the .text section late in linking. As a result, the _etext position was being labelled before the appended jump regions, causing confusion about where the boundaries of the executable region actually are in the running kernel, and broke at least the fault injection code. This moves the _etext mark to outside (and immediately after) the .text area, as it already the case on other architectures (e.g. arm64, arm). Reported-and-tested-by: Sami Tolvanen Signed-off-by: Kees Cook Cc: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20190423183827.GA4012@beast Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin commit 69da78aec7e723b82d0ea75a509f9676cb64006a Author: Farhan Ali Date: Mon Apr 8 17:05:33 2019 -0400 vfio-ccw: Release any channel program when releasing/removing vfio-ccw mdev [ Upstream commit b49bdc8602b7c9c7a977758bee4125683f73e59f ] When releasing the vfio-ccw mdev, we currently do not release any existing channel program and its pinned pages. This can lead to the following warning: [1038876.561565] WARNING: CPU: 2 PID: 144727 at drivers/vfio/vfio_iommu_type1.c:1494 vfio_sanity_check_pfn_list+0x40/0x70 [vfio_iommu_type1] .... 1038876.561921] Call Trace: [1038876.561935] ([<00000009897fb870>] 0x9897fb870) [1038876.561949] [<000003ff8013bf62>] vfio_iommu_type1_detach_group+0xda/0x2f0 [vfio_iommu_type1] [1038876.561965] [<000003ff8007b634>] __vfio_group_unset_container+0x64/0x190 [vfio] [1038876.561978] [<000003ff8007b87e>] vfio_group_put_external_user+0x26/0x38 [vfio] [1038876.562024] [<000003ff806fc608>] kvm_vfio_group_put_external_user+0x40/0x60 [kvm] [1038876.562045] [<000003ff806fcb9e>] kvm_vfio_destroy+0x5e/0xd0 [kvm] [1038876.562065] [<000003ff806f63fc>] kvm_put_kvm+0x2a4/0x3d0 [kvm] [1038876.562083] [<000003ff806f655e>] kvm_vm_release+0x36/0x48 [kvm] [1038876.562098] [<00000000003c2dc4>] __fput+0x144/0x228 [1038876.562113] [<000000000016ee82>] task_work_run+0x8a/0xd8 [1038876.562125] [<000000000014c7a8>] do_exit+0x5d8/0xd90 [1038876.562140] [<000000000014d084>] do_group_exit+0xc4/0xc8 [1038876.562155] [<000000000015c046>] get_signal+0x9ae/0xa68 [1038876.562169] [<0000000000108d66>] do_signal+0x66/0x768 [1038876.562185] [<0000000000b9e37e>] system_call+0x1ea/0x2d8 [1038876.562195] 2 locks held by qemu-system-s39/144727: [1038876.562205] #0: 00000000537abaf9 (&container->group_lock){++++}, at: __vfio_group_unset_container+0x3c/0x190 [vfio] [1038876.562230] #1: 00000000670008b5 (&iommu->lock){+.+.}, at: vfio_iommu_type1_detach_group+0x36/0x2f0 [vfio_iommu_type1] [1038876.562250] Last Breaking-Event-Address: [1038876.562262] [<000003ff8013aa24>] vfio_sanity_check_pfn_list+0x3c/0x70 [vfio_iommu_type1] [1038876.562272] irq event stamp: 4236481 [1038876.562287] hardirqs last enabled at (4236489): [<00000000001cee7a>] console_unlock+0x6d2/0x740 [1038876.562299] hardirqs last disabled at (4236496): [<00000000001ce87e>] console_unlock+0xd6/0x740 [1038876.562311] softirqs last enabled at (4234162): [<0000000000b9fa1e>] __do_softirq+0x556/0x598 [1038876.562325] softirqs last disabled at (4234153): [<000000000014e4cc>] irq_exit+0xac/0x108 [1038876.562337] ---[ end trace 6c96d467b1c3ca06 ]--- Similarly we do not free the channel program when we are removing the vfio-ccw device. Let's fix this by resetting the device and freeing the channel program and pinned pages in the release path. For the remove path we can just quiesce the device, since in the remove path the mediated device is going away for good and so we don't need to do a full reset. Signed-off-by: Farhan Ali Message-Id: Acked-by: Eric Farman Signed-off-by: Cornelia Huck Signed-off-by: Sasha Levin commit c79adb6f8b704cf37f7217c02ca9a852551776da Author: Farhan Ali Date: Mon Apr 8 17:05:31 2019 -0400 vfio-ccw: Do not call flush_workqueue while holding the spinlock [ Upstream commit cea5dde42a83b5f0a039da672f8686455936b8d8 ] Currently we call flush_workqueue while holding the subchannel spinlock. But flush_workqueue function can go to sleep, so do not call the function while holding the spinlock. Fixes the following bug: [ 285.203430] BUG: scheduling while atomic: bash/14193/0x00000002 [ 285.203434] INFO: lockdep is turned off. .... [ 285.203485] Preemption disabled at: [ 285.203488] [<000003ff80243e5c>] vfio_ccw_sch_quiesce+0xbc/0x120 [vfio_ccw] [ 285.203496] CPU: 7 PID: 14193 Comm: bash Tainted: G W .... [ 285.203504] Call Trace: [ 285.203510] ([<0000000000113772>] show_stack+0x82/0xd0) [ 285.203514] [<0000000000b7a102>] dump_stack+0x92/0xd0 [ 285.203518] [<000000000017b8be>] __schedule_bug+0xde/0xf8 [ 285.203524] [<0000000000b95b5a>] __schedule+0x7a/0xc38 [ 285.203528] [<0000000000b9678a>] schedule+0x72/0xb0 [ 285.203533] [<0000000000b9bfbc>] schedule_timeout+0x34/0x528 [ 285.203538] [<0000000000b97608>] wait_for_common+0x118/0x1b0 [ 285.203544] [<0000000000166d6a>] flush_workqueue+0x182/0x548 [ 285.203550] [<000003ff80243e6e>] vfio_ccw_sch_quiesce+0xce/0x120 [vfio_ccw] [ 285.203556] [<000003ff80245278>] vfio_ccw_mdev_reset+0x38/0x70 [vfio_ccw] [ 285.203562] [<000003ff802458b0>] vfio_ccw_mdev_remove+0x40/0x78 [vfio_ccw] [ 285.203567] [<000003ff801a499c>] mdev_device_remove_ops+0x3c/0x80 [mdev] [ 285.203573] [<000003ff801a4d5c>] mdev_device_remove+0xc4/0x130 [mdev] [ 285.203578] [<000003ff801a5074>] remove_store+0x6c/0xa8 [mdev] [ 285.203582] [<000000000046f494>] kernfs_fop_write+0x14c/0x1f8 [ 285.203588] [<00000000003c1530>] __vfs_write+0x38/0x1a8 [ 285.203593] [<00000000003c187c>] vfs_write+0xb4/0x198 [ 285.203597] [<00000000003c1af2>] ksys_write+0x5a/0xb0 [ 285.203601] [<0000000000b9e270>] system_call+0xdc/0x2d8 Signed-off-by: Farhan Ali Reviewed-by: Eric Farman Reviewed-by: Pierre Morel Message-Id: <626bab8bb2958ae132452e1ddaf1b20882ad5a9d.1554756534.git.alifm@linux.ibm.com> Signed-off-by: Cornelia Huck Signed-off-by: Sasha Levin commit f371eda7dfb2ba9928d40a1032418f451784bc77 Author: Parav Pandit Date: Wed Apr 10 11:23:04 2019 +0300 RDMA/cma: Consider scope_id while binding to ipv6 ll address [ Upstream commit 5d7ed2f27bbd482fd29e6b2e204b1a1ee8a0b268 ] When two netdev have same link local addresses (such as vlan and non vlan), two rdma cm listen id should be able to bind to following different addresses. listener-1: addr=lla, scope_id=A, port=X listener-2: addr=lla, scope_id=B, port=X However while comparing the addresses only addr and port are considered, due to which 2nd listener fails to listen. In below example of two listeners, 2nd listener is failing with address in use error. $ rping -sv -a fe80::268a:7ff:feb3:d113%ens2f1 -p 4545& $ rping -sv -a fe80::268a:7ff:feb3:d113%ens2f1.200 -p 4545 rdma_bind_addr: Address already in use To overcome this, consider the scope_ids as well which forms the accurate IPv6 link local address. Signed-off-by: Parav Pandit Reviewed-by: Daniel Jurgens Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin commit 518bd2c457a9f17787e2d9ed19ef9562f15cb029 Author: Arnd Bergmann Date: Thu Apr 25 00:48:28 2019 +0800 bcache: avoid clang -Wunintialized warning [ Upstream commit 78d4eb8ad9e1d413449d1b7a060f50b6efa81ebd ] clang has identified a code path in which it thinks a variable may be unused: drivers/md/bcache/alloc.c:333:4: error: variable 'bucket' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] fifo_pop(&ca->free_inc, bucket); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/md/bcache/util.h:219:27: note: expanded from macro 'fifo_pop' #define fifo_pop(fifo, i) fifo_pop_front(fifo, (i)) ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/md/bcache/util.h:189:6: note: expanded from macro 'fifo_pop_front' if (_r) { \ ^~ drivers/md/bcache/alloc.c:343:46: note: uninitialized use occurs here allocator_wait(ca, bch_allocator_push(ca, bucket)); ^~~~~~ drivers/md/bcache/alloc.c:287:7: note: expanded from macro 'allocator_wait' if (cond) \ ^~~~ drivers/md/bcache/alloc.c:333:4: note: remove the 'if' if its condition is always true fifo_pop(&ca->free_inc, bucket); ^ drivers/md/bcache/util.h:219:27: note: expanded from macro 'fifo_pop' #define fifo_pop(fifo, i) fifo_pop_front(fifo, (i)) ^ drivers/md/bcache/util.h:189:2: note: expanded from macro 'fifo_pop_front' if (_r) { \ ^ drivers/md/bcache/alloc.c:331:15: note: initialize the variable 'bucket' to silence this warning long bucket; ^ This cannot happen in practice because we only enter the loop if there is at least one element in the list. Slightly rearranging the code makes this clearer to both the reader and the compiler, which avoids the warning. Signed-off-by: Arnd Bergmann Reviewed-by: Nathan Chancellor Signed-off-by: Coly Li Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit 72c1f20d867500e9cdbecfa90d4f3e1bdca1fa89 Author: Coly Li Date: Thu Apr 25 00:48:34 2019 +0800 bcache: add failure check to run_cache_set() for journal replay [ Upstream commit ce3e4cfb59cb382f8e5ce359238aa580d4ae7778 ] Currently run_cache_set() has no return value, if there is failure in bch_journal_replay(), the caller of run_cache_set() has no idea about such failure and just continue to execute following code after run_cache_set(). The internal failure is triggered inside bch_journal_replay() and being handled in async way. This behavior is inefficient, while failure handling inside bch_journal_replay(), cache register code is still running to start the cache set. Registering and unregistering code running as same time may introduce some rare race condition, and make the code to be more hard to be understood. This patch adds return value to run_cache_set(), and returns -EIO if bch_journal_rreplay() fails. Then caller of run_cache_set() may detect such failure and stop registering code flow immedidately inside register_cache_set(). If journal replay fails, run_cache_set() can report error immediately to register_cache_set(). This patch makes the failure handling for bch_journal_replay() be in synchronized way, easier to understand and debug, and avoid poetential race condition for register-and-unregister in same time. Signed-off-by: Coly Li Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit ba278c0cbd0d99c98f067c76465d68fd914ce994 Author: Tang Junhui Date: Thu Apr 25 00:48:41 2019 +0800 bcache: fix failure in journal relplay [ Upstream commit 631207314d88e9091be02fbdd1fdadb1ae2ed79a ] journal replay failed with messages: Sep 10 19:10:43 ceph kernel: bcache: error on bb379a64-e44e-4812-b91d-a5599871a3b1: bcache: journal entries 2057493-2057567 missing! (replaying 2057493-2076601), disabling caching The reason is in journal_reclaim(), when discard is enabled, we send discard command and reclaim those journal buckets whose seq is old than the last_seq_now, but before we write a journal with last_seq_now, the machine is restarted, so the journal with the last_seq_now is not written to the journal bucket, and the last_seq_wrote in the newest journal is old than last_seq_now which we expect to be, so when we doing replay, journals from last_seq_wrote to last_seq_now are missing. It's hard to write a journal immediately after journal_reclaim(), and it harmless if those missed journal are caused by discarding since those journals are already wrote to btree node. So, if miss seqs are started from the beginning journal, we treat it as normal, and only print a message to show the miss journal, and point out it maybe caused by discarding. Patch v2 add a judgement condition to ignore the missed journal only when discard enabled as Coly suggested. (Coly Li: rebase the patch with other changes in bch_journal_replay()) Signed-off-by: Tang Junhui Tested-by: Dennis Schridde Signed-off-by: Coly Li Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit 67d75fb8f1c33385fca722dc23d919c284202b86 Author: Coly Li Date: Thu Apr 25 00:48:36 2019 +0800 bcache: return error immediately in bch_journal_replay() [ Upstream commit 68d10e6979a3b59e3cd2e90bfcafed79c4cf180a ] When failure happens inside bch_journal_replay(), calling cache_set_err_on() and handling the failure in async way is not a good idea. Because after bch_journal_replay() returns, registering code will continue to execute following steps, and unregistering code triggered by cache_set_err_on() is running in same time. First it is unnecessary to handle failure and unregister cache set in an async way, second there might be potential race condition to run register and unregister code for same cache set. So in this patch, if failure happens in bch_journal_replay(), we don't call cache_set_err_on(), and just print out the same error message to kernel message buffer, then return -EIO immediately caller. Then caller can detect such failure and handle it in synchrnozied way. Signed-off-by: Coly Li Reviewed-by: Hannes Reinecke Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit 7c8550b8ef0f1cc6c9657871213a80377ed81c5f Author: Shenghui Wang Date: Thu Apr 25 00:48:43 2019 +0800 bcache: avoid potential memleak of list of journal_replay(s) in the CACHE_SYNC branch of run_cache_set [ Upstream commit 95f18c9d1310730d075499a75aaf13bcd60405a7 ] In the CACHE_SYNC branch of run_cache_set(), LIST_HEAD(journal) is used to collect journal_replay(s) and filled by bch_journal_read(). If all goes well, bch_journal_replay() will release the list of jounal_replay(s) at the end of the branch. If something goes wrong, code flow will jump to the label "err:" and leave the list unreleased. This patch will release the list of journal_replay(s) in the case of error detected. v1 -> v2: * Move the release code to the location after label 'err:' to simply the change. Signed-off-by: Shenghui Wang Signed-off-by: Coly Li Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit 63f2d4bba9e1f497b3e8938445783c26e61ad3d5 Author: Corentin Labbe Date: Thu Apr 18 10:17:34 2019 +0200 crypto: sun4i-ss - Fix invalid calculation of hash end [ Upstream commit f87391558acf816b48f325a493d81d45dec40da0 ] When nbytes < 4, end is wronlgy set to a negative value which, due to uint, is then interpreted to a large value leading to a deadlock in the following code. This patch fix this problem. Fixes: 6298e948215f ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator") Signed-off-by: Corentin Labbe Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin commit 47f986bac28d011e3aec960f28583f4d99fc6d5c Author: Sagi Grimberg Date: Wed Apr 24 11:53:17 2019 -0700 nvme-tcp: fix a NULL deref when an admin connect times out [ Upstream commit 7a42589654ae79e1177f0d74306a02d6cef7bddf ] If we timeout the admin startup sequence we might not yet have an I/O tagset allocated which causes the teardown sequence to crash. Make nvme_tcp_teardown_io_queues safe by not iterating inflight tags if the tagset wasn't allocated. Fixes: 39d57757467b ("nvme-tcp: fix timeout handler") Signed-off-by: Sagi Grimberg Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin commit e9dd0fd8233f8eb2e4513283cf9c78beaa87e113 Author: Sagi Grimberg Date: Wed Apr 24 11:53:18 2019 -0700 nvme-rdma: fix a NULL deref when an admin connect times out [ Upstream commit 1007709d7d06fab09bf2d007657575958676282b ] If we timeout the admin startup sequence we might not yet have an I/O tagset allocated which causes the teardown sequence to crash. Make nvme_tcp_teardown_io_queues safe by not iterating inflight tags if the tagset wasn't allocated. Fixes: 4c174e636674 ("nvme-rdma: fix timeout handler") Signed-off-by: Sagi Grimberg Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin commit 2e8c239616c4f9f5a9f83b05bae6f6b5ba12d855 Author: Sagi Grimberg Date: Mon Mar 11 15:02:25 2019 -0700 nvme: set 0 capacity if namespace block size exceeds PAGE_SIZE [ Upstream commit 01fa017484ad98fccdeaab32db0077c574b6bd6f ] If our target exposed a namespace with a block size that is greater than PAGE_SIZE, set 0 capacity on the namespace as we do not support it. This issue encountered when the nvmet namespace was backed by a tempfile. Signed-off-by: Sagi Grimberg Reviewed-by: Keith Busch Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin commit 0a0bf234477632053865102d1a34554e6dc0a9ce Author: Kangjie Lu Date: Tue Mar 12 03:05:02 2019 -0500 net: cw1200: fix a NULL pointer dereference [ Upstream commit 0ed2a005347400500a39ea7c7318f1fea57fb3ca ] In case create_singlethread_workqueue fails, the fix free the hardware and returns NULL to avoid NULL pointer dereference. Signed-off-by: Kangjie Lu Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin commit 8945579832c651bf58d123df0635fb099b403af5 Author: Aditya Pakki Date: Sat Mar 23 15:49:16 2019 -0500 rsi: Fix NULL pointer dereference in kmalloc [ Upstream commit d5414c2355b20ea8201156d2e874265f1cb0d775 ] kmalloc can fail in rsi_register_rates_channels but memcpy still attempts to write to channels. The patch replaces these calls with kmemdup and passes the error upstream. Signed-off-by: Aditya Pakki Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin commit 9df0ca5d1b3027a1c8d7eb9afb29b60e698aad32 Author: Dan Carpenter Date: Thu Apr 4 11:44:23 2019 +0300 mwifiex: prevent an array overflow [ Upstream commit b4c35c17227fe437ded17ce683a6927845f8c4a4 ] The "rate_index" is only used as an index into the phist_data->rx_rate[] array in the mwifiex_hist_data_set() function. That array has MWIFIEX_MAX_AC_RX_RATES (74) elements and it's used to generate some debugfs information. The "rate_index" variable comes from the network skb->data[] and it is a u8 so it's in the 0-255 range. We need to cap it to prevent an array overflow. Fixes: cbf6e05527a7 ("mwifiex: add rx histogram statistics support") Signed-off-by: Dan Carpenter Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin commit aef12f25323ff13807c848f06f22d3f616e29ac8 Author: Xiaoli Feng Date: Sat Mar 16 09:43:30 2019 +0800 Fix nfs4.2 return -EINVAL when do dedupe operation [ Upstream commit ce96e888fe48ecfa868c9a39adc03292c78a80ff ] dedupe_file_range operations is combiled into remap_file_range. But in nfs42_remap_file_range, it's skiped for dedupe operations. Before this patch: # dd if=/dev/zero of=nfs/file bs=1M count=1 # xfs_io -c "dedupe nfs/file 4k 64k 4k" nfs/file XFS_IOC_FILE_EXTENT_SAME: Invalid argument After this patch: # dd if=/dev/zero of=nfs/file bs=1M count=1 # xfs_io -c "dedupe nfs/file 4k 64k 4k" nfs/file deduped 4096/4096 bytes at offset 65536 4 KiB, 1 ops; 0.0046 sec (865.988 KiB/sec and 216.4971 ops/sec) Signed-off-by: Xiaoli Feng Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin commit d50a3cd0a0cc7e4b6f8dd622e526cbd1413855f2 Author: Daniel Baluta Date: Sun Apr 21 19:39:08 2019 +0000 ASoC: fsl_sai: Update is_slave_mode with correct value [ Upstream commit ddb351145a967ee791a0fb0156852ec2fcb746ba ] is_slave_mode defaults to false because sai structure that contains it is kzalloc'ed. Anyhow, if we decide to set the following configuration SAI slave -> SAI master, is_slave_mode will remain set on true although SAI being master it should be set to false. Fix this by updating is_slave_mode for each call of fsl_sai_set_dai_fmt. Signed-off-by: Daniel Baluta Acked-by: Nicolin Chen Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 976c828c229b9d5dcd972a8fd264600475d2080b Author: Kangjie Lu Date: Sat Apr 13 11:34:47 2019 +0100 slimbus: fix a potential NULL pointer dereference in of_qcom_slim_ngd_register [ Upstream commit 06d5d6b7f9948a89543e1160ef852d57892c750d ] In case platform_device_alloc fails, the fix returns an error code to avoid the NULL pointer dereference. Signed-off-by: Kangjie Lu Signed-off-by: Srinivas Kandagatla Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 54b41f070947d631f918e8fec07b73d889b1d3c4 Author: Daniel T. Lee Date: Wed Apr 24 05:24:56 2019 +0900 libbpf: fix samples/bpf build failure due to undefined UINT32_MAX [ Upstream commit 32e621e55496a0009f44fe4914cd4a23cade4984 ] Currently, building bpf samples will cause the following error. ./tools/lib/bpf/bpf.h:132:27: error: 'UINT32_MAX' undeclared here (not in a function) .. #define BPF_LOG_BUF_SIZE (UINT32_MAX >> 8) /* verifier maximum in kernels <= 5.1 */ ^ ./samples/bpf/bpf_load.h:31:25: note: in expansion of macro 'BPF_LOG_BUF_SIZE' extern char bpf_log_buf[BPF_LOG_BUF_SIZE]; ^~~~~~~~~~~~~~~~ Due to commit 4519efa6f8ea ("libbpf: fix BPF_LOG_BUF_SIZE off-by-one error") hard-coded size of BPF_LOG_BUF_SIZE has been replaced with UINT32_MAX which is defined in header. Even with this change, bpf selftests are running fine since these are built with clang and it includes header(-idirafter) from clang/6.0.0/include. (it has ) clang -I. -I./include/uapi -I../../../include/uapi -idirafter /usr/local/include -idirafter /usr/include \ -idirafter /usr/lib/llvm-6.0/lib/clang/6.0.0/include -idirafter /usr/include/x86_64-linux-gnu \ -Wno-compare-distinct-pointer-types -O2 -target bpf -emit-llvm -c progs/test_sysctl_prog.c -o - | \ llc -march=bpf -mcpu=generic -filetype=obj -o /linux/tools/testing/selftests/bpf/test_sysctl_prog.o But bpf samples are compiled with GCC, and it only searches and includes headers declared at the target file. As '#include ' hasn't been declared in tools/lib/bpf/bpf.h, it causes build failure of bpf samples. gcc -Wp,-MD,./samples/bpf/.sockex3_user.o.d -Wall -Wmissing-prototypes -Wstrict-prototypes \ -O2 -fomit-frame-pointer -std=gnu89 -I./usr/include -I./tools/lib/ -I./tools/testing/selftests/bpf/ \ -I./tools/ lib/ -I./tools/include -I./tools/perf -c -o ./samples/bpf/sockex3_user.o ./samples/bpf/sockex3_user.c; This commit add declaration of '#include ' to tools/lib/bpf/bpf.h to fix this problem. Signed-off-by: Daniel T. Lee Acked-by: Yonghong Song Signed-off-by: Daniel Borkmann Signed-off-by: Sasha Levin commit 13455c92794ac1e82dd0a8508b799e1bc24e1eec Author: Sergey Matyukevich Date: Tue Mar 26 09:27:37 2019 +0000 mac80211/cfg80211: update bss channel on channel switch [ Upstream commit 5dc8cdce1d722c733f8c7af14c5fb595cfedbfa8 ] FullMAC STAs have no way to update bss channel after CSA channel switch completion. As a result, user-space tools may provide inconsistent channel info. For instance, consider the following two commands: $ sudo iw dev wlan0 link $ sudo iw dev wlan0 info The latter command gets channel info from the hardware, so most probably its output will be correct. However the former command gets channel info from scan cache, so its output will contain outdated channel info. In fact, current bss channel info will not be updated until the next [re-]connect. Note that mac80211 STAs have a workaround for this, but it requires access to internal cfg80211 data, see ieee80211_chswitch_work: /* XXX: shouldn't really modify cfg80211-owned data! */ ifmgd->associated->channel = sdata->csa_chandef.chan; This patch suggests to convert mac80211 workaround into cfg80211 behavior and to update current bss channel in cfg80211_ch_switch_notify. Signed-off-by: Sergey Matyukevich Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit 54570f7c987824d4656bfa5a0a747c94f00485f8 Author: Sugar Zhang Date: Wed Apr 3 19:06:22 2019 +0800 dmaengine: pl330: _stop: clear interrupt status [ Upstream commit 2da254cc7908105a60a6bb219d18e8dced03dcb9 ] This patch kill instructs the DMAC to immediately terminate execution of a thread. and then clear the interrupt status, at last, stop generating interrupts for DMA_SEV. to guarantee the next dma start is clean. otherwise, one interrupt maybe leave to next start and make some mistake. we can reporduce the problem as follows: DMASEV: modify the event-interrupt resource, and if the INTEN sets function as interrupt, the DMAC will set irq HIGH to generate interrupt. write INTCLR to clear interrupt. DMA EXECUTING INSTRUCTS DMA TERMINATE | | | | ... _stop | | | spin_lock_irqsave DMASEV | | | | mask INTEN | | | DMAKILL | | | spin_unlock_irqrestore in above case, a interrupt was left, and if we unmask INTEN, the DMAC will set irq HIGH to generate interrupt. to fix this, do as follows: DMA EXECUTING INSTRUCTS DMA TERMINATE | | | | ... _stop | | | spin_lock_irqsave DMASEV | | | | DMAKILL | | | clear INTCLR | mask INTEN | | | spin_unlock_irqrestore Signed-off-by: Sugar Zhang Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin commit 460494facfb3477de8f91855dc647cb07fdc9c26 Author: Huazhong Tan Date: Thu Apr 25 20:42:49 2019 +0800 net: hns3: use atomic_t replace u32 for arq's count [ Upstream commit 30780a8b1677e7409b32ae52a9a84f7d41ae6b43 ] Since irq handler and mailbox task will both update arq's count, so arq's count should use atomic_t instead of u32, otherwise its value may go wrong finally. Fixes: 07a0556a3a73 ("net: hns3: Changes to support ARQ(Asynchronous Receive Queue)") Signed-off-by: Huazhong Tan Signed-off-by: Peng Li Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 45896589f6e64f5ff369766859b7d10997f6b5bc Author: Arnd Bergmann Date: Thu Apr 25 18:25:54 2019 +0200 s390: qeth: address type mismatch warning [ Upstream commit 46b83629dede262315aa82179d105581f11763b6 ] clang produces a harmless warning for each use for the qeth_adp_supported macro: drivers/s390/net/qeth_l2_main.c:559:31: warning: implicit conversion from enumeration type 'enum qeth_ipa_setadp_cmd' to different enumeration type 'enum qeth_ipa_funcs' [-Wenum-conversion] if (qeth_adp_supported(card, IPA_SETADP_SET_PROMISC_MODE)) ~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/s390/net/qeth_core.h:179:41: note: expanded from macro 'qeth_adp_supported' qeth_is_ipa_supported(&c->options.adp, f) ~~~~~~~~~~~~~~~~~~~~~ ^ Add a version of this macro that uses the correct types, and remove the unused qeth_adp_enabled() macro that has the same problem. Reviewed-by: Nathan Chancellor Signed-off-by: Arnd Bergmann Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 6475e2dff9c83b7ce987b1c56f93b8f5a0ffdf27 Author: Heiner Kallweit Date: Wed Apr 24 21:41:06 2019 +0200 net: phy: improve genphy_soft_reset [ Upstream commit 8c90b795e90f7753d23c18e8b95dd71b4a18c5d9 ] PHY's behave differently when being reset. Some reset registers to defaults, some don't. Some trigger an autoneg restart, some don't. So let's also set the autoneg restart bit when resetting. Then PHY behavior should be more consistent. Clearing BMCR_ISOLATE serves the same purpose and is borrowed from genphy_restart_aneg. BMCR holds the speed / duplex settings in fixed mode. Therefore we may have an issue if a soft reset resets BMCR to its default. So better call genphy_setup_forced() afterwards in fixed mode. We've seen no related complaint in the last >10 yrs, so let's treat it as an improvement. Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 90a4149d4db83438746923864c9dbc879b8b8ad8 Author: Yunsheng Lin Date: Thu Apr 25 20:42:46 2019 +0800 net: hns3: fix for TX clean num when cleaning TX BD [ Upstream commit 63380a1ae4ced8aef67659ff9547c69ef8b9613a ] hns3_desc_unused() returns how many BD have been cleaned, but new buffer has not been attached to them. The register of HNS3_RING_RX_RING_FBDNUM_REG returns how many BD need allocating new buffer to or need to cleaned. So the remaining BD need to be clean is HNS3_RING_RX_RING_FBDNUM_REG - hns3_desc_unused(). Also, new buffer can not attach to the pending BD when the last BD is not handled, because memcpy has not been done on the first pending BD. This patch fixes by subtracting the pending BD num from unused_count after 'HNS3_RING_RX_RING_FBDNUM_REG - unused_count' is used to calculate the BD bum need to be clean. Fixes: e55970950556 ("net: hns3: Add handling of GRO Pkts not fully RX'ed in NAPI poll") Signed-off-by: Yunsheng Lin Signed-off-by: Peng Li Signed-off-by: Huazhong Tan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 84dc618b16b3a3f414428654e6d3f62b0b02042d Author: Mariusz Bialonczyk Date: Thu Mar 21 11:52:55 2019 +0100 w1: fix the resume command API [ Upstream commit 62909da8aca048ecf9fbd7e484e5100608f40a63 ] >From the DS2408 datasheet [1]: "Resume Command function checks the status of the RC flag and, if it is set, directly transfers control to the control functions, similar to a Skip ROM command. The only way to set the RC flag is through successfully executing the Match ROM, Search ROM, Conditional Search ROM, or Overdrive-Match ROM command" The function currently works perfectly fine in a multidrop bus, but when we have only a single slave connected, then only a Skip ROM is used and Match ROM is not called at all. This is leading to problems e.g. with single one DS2408 connected, as the Resume Command is not working properly and the device is responding with failing results after the Resume Command. This commit is fixing this by using a Skip ROM instead in those cases. The bandwidth / performance advantage is exactly the same. Refs: [1] https://datasheets.maximintegrated.com/en/ds/DS2408.pdf Signed-off-by: Mariusz Bialonczyk Reviewed-by: Jean-Francois Dagenais Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit bde1bb58353927a5f6c05cca03cfe3ea82a3b38e Author: Grygorii Strashko Date: Fri Apr 26 20:12:33 2019 +0300 net: ethernet: ti: cpsw: fix allmulti cfg in dual_mac mode [ Upstream commit 06095f34f8a0a2c4c83a19514c272699edd5f80b ] Now CPSW ALE will set/clean Host port bit in Unregistered Multicast Flood Mask (UNREG_MCAST_FLOOD_MASK) for every VLAN without checking if this port belongs to VLAN or not when ALLMULTI mode flag is set for nedev. This is working in non dual_mac mode, but in dual_mac - it causes enabling/disabling ALLMULTI flag for both ports. Hence fix it by adding additional parameter to cpsw_ale_set_allmulti() to specify ALE port number for which ALLMULTI has to be enabled and check if port belongs to VLAN before modifying UNREG_MCAST_FLOOD_MASK. Signed-off-by: Grygorii Strashko Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 5a2778acfdd5423d62cefa78c256b05a0433793f Author: Nicholas Piggin Date: Fri Apr 12 14:26:13 2019 +1000 sched/nohz: Run NOHZ idle load balancer on HK_FLAG_MISC CPUs [ Upstream commit 9b019acb72e4b5741d88e8936d6f200ed44b66b2 ] The NOHZ idle balancer runs on the lowest idle CPU. This can interfere with isolated CPUs, so confine it to HK_FLAG_MISC housekeeping CPUs. HK_FLAG_SCHED is not used for this because it is not set anywhere at the moment. This could be folded into HK_FLAG_SCHED once that option is fixed. The problem was observed with increased jitter on an application running on CPU0, caused by NOHZ idle load balancing being run on CPU1 (an SMT sibling). Signed-off-by: Nicholas Piggin Signed-off-by: Peter Zijlstra (Intel) Cc: Frederic Weisbecker Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: https://lkml.kernel.org/r/20190412042613.28930-1-npiggin@gmail.com Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin commit d58459894de7e689abe5028bbc08751faaa30849 Author: Bard liao Date: Sun Apr 28 04:53:39 2019 +0800 ALSA: hda: fix unregister device twice on ASoC driver [ Upstream commit 4d95c51776b2edb4d4ebcea00b6e5a1fe538ce66 ] snd_hda_codec_device_new() is used by both legacy HDA and ASoC driver. However, we will call snd_hdac_device_unregister() in snd_hdac_ext_bus_device_remove() for ASoC device. This patch uses the type flag in hdac_device struct to determine is it a ASoC device or legacy HDA device and call snd_hdac_device_unregister() in snd_hda_codec_dev_free() only if it is a legacy HDA device. Signed-off-by: Bard liao Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit ff4e79bbe519f5152200188b664f02ae7b040927 Author: Philipp Rudo Date: Mon Apr 1 12:48:43 2019 +0200 s390/kexec_file: Fix detection of text segment in ELF loader [ Upstream commit 729829d775c9a5217abc784b2f16087d79c4eec8 ] To register data for the next kernel (command line, oldmem_base, etc.) the current kernel needs to find the ELF segment that contains head.S. This is currently done by checking ifor 'phdr->p_paddr == 0'. This works fine for the current kernel build but in theory the first few pages could be skipped. Make the detection more robust by checking if the entry point lies within the segment. Signed-off-by: Philipp Rudo Signed-off-by: Martin Schwidefsky Signed-off-by: Sasha Levin commit ed3fe9a34ff3e8d65f963f2da9380c3b154babf2 Author: Manish Rangankar Date: Fri Apr 26 03:55:45 2019 -0700 scsi: qedi: Abort ep termination if offload not scheduled [ Upstream commit f848bfd8e167210a29374e8a678892bed591684f ] Sometimes during connection recovery when there is a failure to resolve ARP, and offload connection was not issued, driver tries to flush pending offload connection work which was not queued up. kernel: WARNING: CPU: 19 PID: 10110 at kernel/workqueue.c:3030 __flush_work.isra.34+0x19c/0x1b0 kernel: CPU: 19 PID: 10110 Comm: iscsid Tainted: G W 5.1.0-rc4 #11 kernel: Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 2.9.1 12/04/2018 kernel: RIP: 0010:__flush_work.isra.34+0x19c/0x1b0 kernel: Code: 8b fb 66 0f 1f 44 00 00 31 c0 eb ab 48 89 ef c6 07 00 0f 1f 40 00 fb 66 0f 1f 44 00 00 31 c0 eb 96 e8 08 16 fe ff 0f 0b eb 8d <0f> 0b 31 c0 eb 87 0f 1f 40 00 66 2e 0f 1 f 84 00 00 00 00 00 0f 1f kernel: RSP: 0018:ffffa6b4054dba68 EFLAGS: 00010246 kernel: RAX: 0000000000000000 RBX: ffff91df21c36fc0 RCX: 0000000000000000 kernel: RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff91df21c36fc0 kernel: RBP: ffff91df21c36ef0 R08: 0000000000000000 R09: 0000000000000000 kernel: R10: 0000000000000038 R11: ffffa6b4054dbd60 R12: ffffffffc05e72c0 kernel: R13: ffff91db10280820 R14: 0000000000000048 R15: 0000000000000000 kernel: FS: 00007f5d83cc1740(0000) GS:ffff91df2f840000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000001cc5000 CR3: 0000000465450002 CR4: 00000000001606e0 kernel: Call Trace: kernel: ? try_to_del_timer_sync+0x4d/0x80 kernel: qedi_ep_disconnect+0x3b/0x410 [qedi] kernel: ? 0xffffffffc083c000 kernel: ? klist_iter_exit+0x14/0x20 kernel: ? class_find_device+0x93/0xf0 kernel: iscsi_if_ep_disconnect.isra.18+0x58/0x70 [scsi_transport_iscsi] kernel: iscsi_if_recv_msg+0x10e2/0x1510 [scsi_transport_iscsi] kernel: ? copyout+0x22/0x30 kernel: ? _copy_to_iter+0xa0/0x430 kernel: ? _cond_resched+0x15/0x30 kernel: ? __kmalloc_node_track_caller+0x1f9/0x270 kernel: iscsi_if_rx+0xa5/0x1e0 [scsi_transport_iscsi] kernel: netlink_unicast+0x17f/0x230 kernel: netlink_sendmsg+0x2d2/0x3d0 kernel: sock_sendmsg+0x36/0x50 kernel: ___sys_sendmsg+0x280/0x2a0 kernel: ? timerqueue_add+0x54/0x80 kernel: ? enqueue_hrtimer+0x38/0x90 kernel: ? hrtimer_start_range_ns+0x19f/0x2c0 kernel: __sys_sendmsg+0x58/0xa0 kernel: do_syscall_64+0x5b/0x180 kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by: Manish Rangankar Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 4175269505e2131ba45dfbd048d2d25ef0287d58 Author: Fabien Dessenne Date: Wed Apr 24 14:26:48 2019 +0200 rtc: stm32: manage the get_irq probe defer case [ Upstream commit cf612c5949aca2bd81a1e28688957c8149ea2693 ] Manage the -EPROBE_DEFER error case for the wake IRQ. Signed-off-by: Fabien Dessenne Acked-by: Amelie Delaunay Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin commit 1852f7673301cc1682727e413fe8166629e633b6 Author: Sven Van Asbroeck Date: Fri Apr 26 14:36:35 2019 -0400 rtc: 88pm860x: prevent use-after-free on device remove [ Upstream commit f22b1ba15ee5785aa028384ebf77dd39e8e47b70 ] The device's remove() attempts to shut down the delayed_work scheduled on the kernel-global workqueue by calling flush_scheduled_work(). Unfortunately, flush_scheduled_work() does not prevent the delayed_work from re-scheduling itself. The delayed_work might run after the device has been removed, and touch the already de-allocated info structure. This is a potential use-after-free. Fix by calling cancel_delayed_work_sync() during remove(): this ensures that the delayed work is properly cancelled, is no longer running, and is not able to re-schedule itself. This issue was detected with the help of Coccinelle. Signed-off-by: Sven Van Asbroeck Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin commit 20ef660f7230dce403ba56cfa13e32aec3f16baa Author: Johannes Berg Date: Tue Mar 5 10:31:11 2019 +0100 iwlwifi: pcie: don't crash on invalid RX interrupt [ Upstream commit 30f24eabab8cd801064c5c37589d803cb4341929 ] If for some reason the device gives us an RX interrupt before we're ready for it, perhaps during device power-on with misconfigured IRQ causes mapping or so, we can crash trying to access the queues. Prevent that by checking that we actually have RXQs and that they were properly allocated. Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho Signed-off-by: Sasha Levin commit 7135402459f35a8f3d83fa90369a5a8d62b20e69 Author: Qu Wenruo Date: Tue Feb 26 16:33:56 2019 +0800 btrfs: Don't panic when we can't find a root key [ Upstream commit 7ac1e464c4d473b517bb784f30d40da1f842482e ] When we failed to find a root key in btrfs_update_root(), we just panic. That's definitely not cool, fix it by outputting an unique error message, aborting current transaction and return -EUCLEAN. This should not normally happen as the root has been used by the callers in some way. Reviewed-by: Filipe Manana Reviewed-by: Johannes Thumshirn Signed-off-by: Qu Wenruo Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit 2728f6a37c45580988a53c365545d386e1186bde Author: Josef Bacik Date: Mon Feb 25 11:14:45 2019 -0500 btrfs: fix panic during relocation after ENOSPC before writeback happens [ Upstream commit ff612ba7849964b1898fd3ccd1f56941129c6aab ] We've been seeing the following sporadically throughout our fleet panic: kernel BUG at fs/btrfs/relocation.c:4584! netversion: 5.0-0 Backtrace: #0 [ffffc90003adb880] machine_kexec at ffffffff81041da8 #1 [ffffc90003adb8c8] __crash_kexec at ffffffff8110396c #2 [ffffc90003adb988] crash_kexec at ffffffff811048ad #3 [ffffc90003adb9a0] oops_end at ffffffff8101c19a #4 [ffffc90003adb9c0] do_trap at ffffffff81019114 #5 [ffffc90003adba00] do_error_trap at ffffffff810195d0 #6 [ffffc90003adbab0] invalid_op at ffffffff81a00a9b [exception RIP: btrfs_reloc_cow_block+692] RIP: ffffffff8143b614 RSP: ffffc90003adbb68 RFLAGS: 00010246 RAX: fffffffffffffff7 RBX: ffff8806b9c32000 RCX: ffff8806aad00690 RDX: ffff880850b295e0 RSI: ffff8806b9c32000 RDI: ffff88084f205bd0 RBP: ffff880849415000 R8: ffffc90003adbbe0 R9: ffff88085ac90000 R10: ffff8805f7369140 R11: 0000000000000000 R12: ffff880850b295e0 R13: ffff88084f205bd0 R14: 0000000000000000 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffffc90003adbbb0] __btrfs_cow_block at ffffffff813bf1cd #8 [ffffc90003adbc28] btrfs_cow_block at ffffffff813bf4b3 #9 [ffffc90003adbc78] btrfs_search_slot at ffffffff813c2e6c The way relocation moves data extents is by creating a reloc inode and preallocating extents in this inode and then copying the data into these preallocated extents. Once we've done this for all of our extents, we'll write out these dirty pages, which marks the extent written, and goes into btrfs_reloc_cow_block(). From here we get our current reloc_control, which _should_ match the reloc_control for the current block group we're relocating. However if we get an ENOSPC in this path at some point we'll bail out, never initiating writeback on this inode. Not a huge deal, unless we happen to be doing relocation on a different block group, and this block group is now rc->stage == UPDATE_DATA_PTRS. This trips the BUG_ON() in btrfs_reloc_cow_block(), because we expect to be done modifying the data inode. We are in fact done modifying the metadata for the data inode we're currently using, but not the one from the failed block group, and thus we BUG_ON(). (This happens when writeback finishes for extents from the previous group, when we are at btrfs_finish_ordered_io() which updates the data reloc tree (inode item, drops/adds extent items, etc).) Fix this by writing out the reloc data inode always, and then breaking out of the loop after that point to keep from tripping this BUG_ON() later. Signed-off-by: Josef Bacik Reviewed-by: Filipe Manana [ add note from Filipe ] Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit 37108ec4c40f6ff9e8531276cb602e3810fff167 Author: Robbie Ko Date: Tue Mar 26 11:56:11 2019 +0800 Btrfs: fix data bytes_may_use underflow with fallocate due to failed quota reserve [ Upstream commit 39ad317315887c2cb9a4347a93a8859326ddf136 ] When doing fallocate, we first add the range to the reserve_list and then reserve the quota. If quota reservation fails, we'll release all reserved parts of reserve_list. However, cur_offset is not updated to indicate that this range is already been inserted into the list. Therefore, the same range is freed twice. Once at list_for_each_entry loop, and once at the end of the function. This will result in WARN_ON on bytes_may_use when we free the remaining space. At the end, under the 'out' label we have a call to: btrfs_free_reserved_data_space(inode, data_reserved, alloc_start, alloc_end - cur_offset); The start offset, third argument, should be cur_offset. Everything from alloc_start to cur_offset was freed by the list_for_each_entry_safe_loop. Fixes: 18513091af94 ("btrfs: update btrfs_space_info's bytes_may_use timely") Reviewed-by: Filipe Manana Signed-off-by: Robbie Ko Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit 5bd63927b1294a225692a78b90cadbef038d4eaa Author: Nadav Amit Date: Thu Apr 25 17:11:31 2019 -0700 x86/modules: Avoid breaking W^X while loading modules [ Upstream commit f2c65fb3221adc6b73b0549fc7ba892022db9797 ] When modules and BPF filters are loaded, there is a time window in which some memory is both writable and executable. An attacker that has already found another vulnerability (e.g., a dangling pointer) might be able to exploit this behavior to overwrite kernel code. Prevent having writable executable PTEs in this stage. In addition, avoiding having W+X mappings can also slightly simplify the patching of modules code on initialization (e.g., by alternatives and static-key), as would be done in the next patch. This was actually the main motivation for this patch. To avoid having W+X mappings, set them initially as RW (NX) and after they are set as RO set them as X as well. Setting them as executable is done as a separate step to avoid one core in which the old PTE is cached (hence writable), and another which sees the updated PTE (executable), which would break the W^X protection. Suggested-by: Thomas Gleixner Suggested-by: Andy Lutomirski Signed-off-by: Nadav Amit Signed-off-by: Rick Edgecombe Signed-off-by: Peter Zijlstra (Intel) Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Dave Hansen Cc: H. Peter Anvin Cc: Jessica Yu Cc: Kees Cook Cc: Linus Torvalds Cc: Masami Hiramatsu Cc: Rik van Riel Link: https://lkml.kernel.org/r/20190426001143.4983-12-namit@vmware.com Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin commit 9fb1ada8c97fe86ff855a54d1db727fd01d0452d Author: Bart Van Assche Date: Wed Apr 17 14:44:41 2019 -0700 scsi: qla2xxx: Fix hardirq-unsafe locking [ Upstream commit 300ec7415c1fed5c73660f50c8e14a67e236dc0a ] Since fc_remote_port_delete() must be called with interrupts enabled, do not disable interrupts when calling that function. Remove the lockin calls from around the put_sess() call. This is safe because the function that is called when the final reference is dropped, qlt_unreg_sess(), grabs the proper locks. This patch avoids that lockdep reports the following: WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected kworker/2:1/62 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: 0000000009e679b3 (&(&k->k_lock)->rlock){+.+.}, at: klist_next+0x43/0x1d0 and this task is already holding: 00000000a033b71c (&(&ha->tgt.sess_lock)->rlock){-...}, at: qla24xx_delete_sess_fn+0x55/0xf0 [qla2xxx_scst] which would create a new lock dependency: (&(&ha->tgt.sess_lock)->rlock){-...} -> (&(&k->k_lock)->rlock){+.+.} but this new dependency connects a HARDIRQ-irq-safe lock: (&(&ha->tgt.sess_lock)->rlock){-...} ... which became HARDIRQ-irq-safe at: lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 qla24xx_report_id_acquisition+0xa69/0xe30 [qla2xxx_scst] qla24xx_process_response_queue+0x69e/0x1270 [qla2xxx_scst] qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx_scst] __handle_irq_event_percpu+0x79/0x3c0 handle_irq_event_percpu+0x70/0xf0 handle_irq_event+0x5a/0x8b handle_edge_irq+0x12c/0x310 handle_irq+0x192/0x20a do_IRQ+0x73/0x160 ret_from_intr+0x0/0x1d default_idle+0x23/0x1f0 arch_cpu_idle+0x15/0x20 default_idle_call+0x35/0x40 do_idle+0x2bb/0x2e0 cpu_startup_entry+0x1d/0x20 start_secondary+0x2a8/0x320 secondary_startup_64+0xa4/0xb0 to a HARDIRQ-irq-unsafe lock: (&(&k->k_lock)->rlock){+.+.} ... which became HARDIRQ-irq-unsafe at: ... lock_acquire+0xe3/0x200 _raw_spin_lock+0x32/0x50 klist_add_tail+0x33/0xb0 device_add+0x7e1/0xb50 device_create_groups_vargs+0x11c/0x150 device_create_with_groups+0x89/0xb0 vtconsole_class_init+0xb2/0x124 do_one_initcall+0xc5/0x3ce kernel_init_freeable+0x295/0x32e kernel_init+0x11/0x11b ret_from_fork+0x3a/0x50 other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&(&k->k_lock)->rlock); local_irq_disable(); lock(&(&ha->tgt.sess_lock)->rlock); lock(&(&k->k_lock)->rlock); lock(&(&ha->tgt.sess_lock)->rlock); *** DEADLOCK *** 3 locks held by kworker/2:1/62: #0: 00000000a4319c16 ((wq_completion)"qla2xxx_wq"){+.+.}, at: process_one_work+0x437/0xa80 #1: 00000000ffa34c42 ((work_completion)(&sess->del_work)){+.+.}, at: process_one_work+0x437/0xa80 #2: 00000000a033b71c (&(&ha->tgt.sess_lock)->rlock){-...}, at: qla24xx_delete_sess_fn+0x55/0xf0 [qla2xxx_scst] the dependencies between HARDIRQ-irq-safe lock and the holding lock: -> (&(&ha->tgt.sess_lock)->rlock){-...} ops: 8 { IN-HARDIRQ-W at: lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 qla24xx_report_id_acquisition+0xa69/0xe30 [qla2xxx_scst] qla24xx_process_response_queue+0x69e/0x1270 [qla2xxx_scst] qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx_scst] __handle_irq_event_percpu+0x79/0x3c0 handle_irq_event_percpu+0x70/0xf0 handle_irq_event+0x5a/0x8b handle_edge_irq+0x12c/0x310 handle_irq+0x192/0x20a do_IRQ+0x73/0x160 ret_from_intr+0x0/0x1d default_idle+0x23/0x1f0 arch_cpu_idle+0x15/0x20 default_idle_call+0x35/0x40 do_idle+0x2bb/0x2e0 cpu_startup_entry+0x1d/0x20 start_secondary+0x2a8/0x320 secondary_startup_64+0xa4/0xb0 INITIAL USE at: lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 qla24xx_report_id_acquisition+0xa69/0xe30 [qla2xxx_scst] qla24xx_process_response_queue+0x69e/0x1270 [qla2xxx_scst] qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx_scst] __handle_irq_event_percpu+0x79/0x3c0 handle_irq_event_percpu+0x70/0xf0 handle_irq_event+0x5a/0x8b handle_edge_irq+0x12c/0x310 handle_irq+0x192/0x20a do_IRQ+0x73/0x160 ret_from_intr+0x0/0x1d default_idle+0x23/0x1f0 arch_cpu_idle+0x15/0x20 default_idle_call+0x35/0x40 do_idle+0x2bb/0x2e0 cpu_startup_entry+0x1d/0x20 start_secondary+0x2a8/0x320 secondary_startup_64+0xa4/0xb0 } ... key at: [] __key.85462+0x0/0xfffffffffff7df80 [qla2xxx_scst] ... acquired at: lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 klist_next+0x43/0x1d0 device_for_each_child+0x96/0x110 scsi_target_block+0x3c/0x40 [scsi_mod] fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc] qla2x00_mark_device_lost+0xa0b/0xa30 [qla2xxx_scst] qlt_unreg_sess+0x1c6/0x380 [qla2xxx_scst] qla24xx_delete_sess_fn+0xe6/0xf0 [qla2xxx_scst] process_one_work+0x511/0xa80 worker_thread+0x67/0x5b0 kthread+0x1d2/0x1f0 ret_from_fork+0x3a/0x50 the dependencies between the lock to be acquired and HARDIRQ-irq-unsafe lock: -> (&(&k->k_lock)->rlock){+.+.} ops: 13831 { HARDIRQ-ON-W at: lock_acquire+0xe3/0x200 _raw_spin_lock+0x32/0x50 klist_add_tail+0x33/0xb0 device_add+0x7e1/0xb50 device_create_groups_vargs+0x11c/0x150 device_create_with_groups+0x89/0xb0 vtconsole_class_init+0xb2/0x124 do_one_initcall+0xc5/0x3ce kernel_init_freeable+0x295/0x32e kernel_init+0x11/0x11b ret_from_fork+0x3a/0x50 SOFTIRQ-ON-W at: lock_acquire+0xe3/0x200 _raw_spin_lock+0x32/0x50 klist_add_tail+0x33/0xb0 device_add+0x7e1/0xb50 device_create_groups_vargs+0x11c/0x150 device_create_with_groups+0x89/0xb0 vtconsole_class_init+0xb2/0x124 do_one_initcall+0xc5/0x3ce kernel_init_freeable+0x295/0x32e kernel_init+0x11/0x11b ret_from_fork+0x3a/0x50 INITIAL USE at: lock_acquire+0xe3/0x200 _raw_spin_lock+0x32/0x50 klist_add_tail+0x33/0xb0 device_add+0x7e1/0xb50 device_create_groups_vargs+0x11c/0x150 device_create_with_groups+0x89/0xb0 vtconsole_class_init+0xb2/0x124 do_one_initcall+0xc5/0x3ce kernel_init_freeable+0x295/0x32e kernel_init+0x11/0x11b ret_from_fork+0x3a/0x50 } ... key at: [] __key.15491+0x0/0x40 ... acquired at: lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 klist_next+0x43/0x1d0 device_for_each_child+0x96/0x110 scsi_target_block+0x3c/0x40 [scsi_mod] fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc] qla2x00_mark_device_lost+0xa0b/0xa30 [qla2xxx_scst] qlt_unreg_sess+0x1c6/0x380 [qla2xxx_scst] qla24xx_delete_sess_fn+0xe6/0xf0 [qla2xxx_scst] process_one_work+0x511/0xa80 worker_thread+0x67/0x5b0 kthread+0x1d2/0x1f0 ret_from_fork+0x3a/0x50 stack backtrace: CPU: 2 PID: 62 Comm: kworker/2:1 Tainted: G O 5.0.7-dbg+ #8 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: qla2xxx_wq qla24xx_delete_sess_fn [qla2xxx_scst] Call Trace: dump_stack+0x86/0xca check_usage.cold.52+0x473/0x563 __lock_acquire+0x11c0/0x23e0 lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 klist_next+0x43/0x1d0 device_for_each_child+0x96/0x110 scsi_target_block+0x3c/0x40 [scsi_mod] fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc] qla2x00_mark_device_lost+0xa0b/0xa30 [qla2xxx_scst] qlt_unreg_sess+0x1c6/0x380 [qla2xxx_scst] qla24xx_delete_sess_fn+0xe6/0xf0 [qla2xxx_scst] process_one_work+0x511/0xa80 worker_thread+0x67/0x5b0 kthread+0x1d2/0x1f0 ret_from_fork+0x3a/0x50 Cc: Himanshu Madhani Cc: Giridhar Malavali Signed-off-by: Bart Van Assche Acked-by: Himanshu Madhani Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit f713644acab7ce87d755a69114edb2f36a987082 Author: Bart Van Assche Date: Wed Apr 17 14:44:43 2019 -0700 scsi: qla2xxx: Avoid that lockdep complains about unsafe locking in tcm_qla2xxx_close_session() [ Upstream commit d4023db71108375e4194e92730ba0d32d7f07813 ] This patch avoids that lockdep reports the following warning: ===================================================== WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected 5.1.0-rc1-dbg+ #11 Tainted: G W ----------------------------------------------------- rmdir/1478 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: 00000000e7ac4607 (&(&k->k_lock)->rlock){+.+.}, at: klist_next+0x43/0x1d0 and this task is already holding: 00000000cf0baf5e (&(&ha->tgt.sess_lock)->rlock){-...}, at: tcm_qla2xxx_close_session+0x57/0xb0 [tcm_qla2xxx] which would create a new lock dependency: (&(&ha->tgt.sess_lock)->rlock){-...} -> (&(&k->k_lock)->rlock){+.+.} but this new dependency connects a HARDIRQ-irq-safe lock: (&(&ha->tgt.sess_lock)->rlock){-...} ... which became HARDIRQ-irq-safe at: lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 qla2x00_fcport_event_handler+0x1f3d/0x22b0 [qla2xxx] qla2x00_async_login_sp_done+0x1dc/0x1f0 [qla2xxx] qla24xx_process_response_queue+0xa37/0x10e0 [qla2xxx] qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx] __handle_irq_event_percpu+0x79/0x3c0 handle_irq_event_percpu+0x70/0xf0 handle_irq_event+0x5a/0x8b handle_edge_irq+0x12c/0x310 handle_irq+0x192/0x20a do_IRQ+0x73/0x160 ret_from_intr+0x0/0x1d default_idle+0x23/0x1f0 arch_cpu_idle+0x15/0x20 default_idle_call+0x35/0x40 do_idle+0x2bb/0x2e0 cpu_startup_entry+0x1d/0x20 start_secondary+0x24d/0x2d0 secondary_startup_64+0xa4/0xb0 to a HARDIRQ-irq-unsafe lock: (&(&k->k_lock)->rlock){+.+.} ... which became HARDIRQ-irq-unsafe at: ... lock_acquire+0xe3/0x200 _raw_spin_lock+0x32/0x50 klist_add_tail+0x33/0xb0 device_add+0x7f4/0xb60 device_create_groups_vargs+0x11c/0x150 device_create_with_groups+0x89/0xb0 vtconsole_class_init+0xb2/0x124 do_one_initcall+0xc5/0x3ce kernel_init_freeable+0x295/0x32e kernel_init+0x11/0x11b ret_from_fork+0x3a/0x50 other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&(&k->k_lock)->rlock); local_irq_disable(); lock(&(&ha->tgt.sess_lock)->rlock); lock(&(&k->k_lock)->rlock); lock(&(&ha->tgt.sess_lock)->rlock); *** DEADLOCK *** 4 locks held by rmdir/1478: #0: 000000002c7f1ba4 (sb_writers#10){.+.+}, at: mnt_want_write+0x32/0x70 #1: 00000000c85eb147 (&default_group_class[depth - 1]#2/1){+.+.}, at: do_rmdir+0x217/0x2d0 #2: 000000002b164d6f (&sb->s_type->i_mutex_key#13){++++}, at: vfs_rmdir+0x7e/0x1d0 #3: 00000000cf0baf5e (&(&ha->tgt.sess_lock)->rlock){-...}, at: tcm_qla2xxx_close_session+0x57/0xb0 [tcm_qla2xxx] the dependencies between HARDIRQ-irq-safe lock and the holding lock: -> (&(&ha->tgt.sess_lock)->rlock){-...} ops: 127 { IN-HARDIRQ-W at: lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 qla2x00_fcport_event_handler+0x1f3d/0x22b0 [qla2xxx] qla2x00_async_login_sp_done+0x1dc/0x1f0 [qla2xxx] qla24xx_process_response_queue+0xa37/0x10e0 [qla2xxx] qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx] __handle_irq_event_percpu+0x79/0x3c0 handle_irq_event_percpu+0x70/0xf0 handle_irq_event+0x5a/0x8b handle_edge_irq+0x12c/0x310 handle_irq+0x192/0x20a do_IRQ+0x73/0x160 ret_from_intr+0x0/0x1d default_idle+0x23/0x1f0 arch_cpu_idle+0x15/0x20 default_idle_call+0x35/0x40 do_idle+0x2bb/0x2e0 cpu_startup_entry+0x1d/0x20 start_secondary+0x24d/0x2d0 secondary_startup_64+0xa4/0xb0 INITIAL USE at: lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 qla2x00_loop_resync+0xb3d/0x2690 [qla2xxx] qla2x00_do_dpc+0xcee/0xf30 [qla2xxx] kthread+0x1d2/0x1f0 ret_from_fork+0x3a/0x50 } ... key at: [] __key.62804+0x0/0xfffffffffff7e900 [qla2xxx] ... acquired at: __lock_acquire+0x11ed/0x1b60 lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 klist_next+0x43/0x1d0 device_for_each_child+0x96/0x110 scsi_target_block+0x3c/0x40 [scsi_mod] fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc] qla2x00_mark_device_lost+0x4d3/0x500 [qla2xxx] qlt_unreg_sess+0x104/0x2c0 [qla2xxx] tcm_qla2xxx_close_session+0xa2/0xb0 [tcm_qla2xxx] target_shutdown_sessions+0x17b/0x190 [target_core_mod] core_tpg_del_initiator_node_acl+0xf3/0x1f0 [target_core_mod] target_fabric_nacl_base_release+0x25/0x30 [target_core_mod] config_item_release+0x9f/0x120 [configfs] config_item_put+0x29/0x2b [configfs] configfs_rmdir+0x3d2/0x520 [configfs] vfs_rmdir+0xb3/0x1d0 do_rmdir+0x25c/0x2d0 __x64_sys_rmdir+0x24/0x30 do_syscall_64+0x77/0x220 entry_SYSCALL_64_after_hwframe+0x49/0xbe the dependencies between the lock to be acquired and HARDIRQ-irq-unsafe lock: -> (&(&k->k_lock)->rlock){+.+.} ops: 14568 { HARDIRQ-ON-W at: lock_acquire+0xe3/0x200 _raw_spin_lock+0x32/0x50 klist_add_tail+0x33/0xb0 device_add+0x7f4/0xb60 device_create_groups_vargs+0x11c/0x150 device_create_with_groups+0x89/0xb0 vtconsole_class_init+0xb2/0x124 do_one_initcall+0xc5/0x3ce kernel_init_freeable+0x295/0x32e kernel_init+0x11/0x11b ret_from_fork+0x3a/0x50 SOFTIRQ-ON-W at: lock_acquire+0xe3/0x200 _raw_spin_lock+0x32/0x50 klist_add_tail+0x33/0xb0 device_add+0x7f4/0xb60 device_create_groups_vargs+0x11c/0x150 device_create_with_groups+0x89/0xb0 vtconsole_class_init+0xb2/0x124 do_one_initcall+0xc5/0x3ce kernel_init_freeable+0x295/0x32e kernel_init+0x11/0x11b ret_from_fork+0x3a/0x50 INITIAL USE at: lock_acquire+0xe3/0x200 _raw_spin_lock+0x32/0x50 klist_add_tail+0x33/0xb0 device_add+0x7f4/0xb60 device_create_groups_vargs+0x11c/0x150 device_create_with_groups+0x89/0xb0 vtconsole_class_init+0xb2/0x124 do_one_initcall+0xc5/0x3ce kernel_init_freeable+0x295/0x32e kernel_init+0x11/0x11b ret_from_fork+0x3a/0x50 } ... key at: [] __key.15805+0x0/0x40 ... acquired at: __lock_acquire+0x11ed/0x1b60 lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 klist_next+0x43/0x1d0 device_for_each_child+0x96/0x110 scsi_target_block+0x3c/0x40 [scsi_mod] fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc] qla2x00_mark_device_lost+0x4d3/0x500 [qla2xxx] qlt_unreg_sess+0x104/0x2c0 [qla2xxx] tcm_qla2xxx_close_session+0xa2/0xb0 [tcm_qla2xxx] target_shutdown_sessions+0x17b/0x190 [target_core_mod] core_tpg_del_initiator_node_acl+0xf3/0x1f0 [target_core_mod] target_fabric_nacl_base_release+0x25/0x30 [target_core_mod] config_item_release+0x9f/0x120 [configfs] config_item_put+0x29/0x2b [configfs] configfs_rmdir+0x3d2/0x520 [configfs] vfs_rmdir+0xb3/0x1d0 do_rmdir+0x25c/0x2d0 __x64_sys_rmdir+0x24/0x30 do_syscall_64+0x77/0x220 entry_SYSCALL_64_after_hwframe+0x49/0xbe stack backtrace: CPU: 7 PID: 1478 Comm: rmdir Tainted: G W 5.1.0-rc1-dbg+ #11 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x86/0xca check_usage.cold.59+0x473/0x563 check_prev_add.constprop.43+0x1f1/0x1170 __lock_acquire+0x11ed/0x1b60 lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 klist_next+0x43/0x1d0 device_for_each_child+0x96/0x110 scsi_target_block+0x3c/0x40 [scsi_mod] fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc] qla2x00_mark_device_lost+0x4d3/0x500 [qla2xxx] qlt_unreg_sess+0x104/0x2c0 [qla2xxx] tcm_qla2xxx_close_session+0xa2/0xb0 [tcm_qla2xxx] target_shutdown_sessions+0x17b/0x190 [target_core_mod] core_tpg_del_initiator_node_acl+0xf3/0x1f0 [target_core_mod] target_fabric_nacl_base_release+0x25/0x30 [target_core_mod] config_item_release+0x9f/0x120 [configfs] config_item_put+0x29/0x2b [configfs] configfs_rmdir+0x3d2/0x520 [configfs] vfs_rmdir+0xb3/0x1d0 do_rmdir+0x25c/0x2d0 __x64_sys_rmdir+0x24/0x30 do_syscall_64+0x77/0x220 entry_SYSCALL_64_after_hwframe+0x49/0xbe Cc: Himanshu Madhani Cc: Giridhar Malavali Signed-off-by: Bart Van Assche Acked-by: Himanshu Madhani Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit e57da989038a9ee893fdec52b607cd8ee04b5cbb Author: Bart Van Assche Date: Wed Apr 17 14:44:28 2019 -0700 scsi: qla2xxx: Fix abort handling in tcm_qla2xxx_write_pending() [ Upstream commit e209783d66bca04b5fce4429e59338517ffc1a0b ] Implementations of the .write_pending() callback functions must guarantee that an appropriate LIO core callback function will be called immediately or at a later time. Make sure that this guarantee is met for aborted SCSI commands. [mkp: typo] Cc: Himanshu Madhani Cc: Giridhar Malavali Fixes: 694833ee00c4 ("scsi: tcm_qla2xxx: Do not allow aborted cmd to advance.") # v4.13. Fixes: a07100e00ac4 ("qla2xxx: Fix TMR ABORT interaction issue between qla2xxx and TCM") # v4.5. Signed-off-by: Bart Van Assche Acked-by: Himanshu Madhani Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 3aa8968ff9cb96d0c9f8018c280b19c1228d2b85 Author: Bart Van Assche Date: Wed Apr 17 14:44:24 2019 -0700 scsi: qla2xxx: Fix a qla24xx_enable_msix() error path [ Upstream commit 24afabdbd0b3553963a2bbf465895492b14d1107 ] Make sure that the allocated interrupts are freed if allocating memory for the msix_entries array fails. Cc: Himanshu Madhani Cc: Giridhar Malavali Signed-off-by: Bart Van Assche Acked-by: Himanshu Madhani Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 267da31d0294970103c04ddb2e8ddec032842709 Author: Viresh Kumar Date: Tue Apr 30 11:35:52 2019 +0530 sched/cpufreq: Fix kobject memleak [ Upstream commit 9a4f26cc98d81b67ecc23b890c28e2df324e29f3 ] Currently the error return path from kobject_init_and_add() is not followed by a call to kobject_put() - which means we are leaking the kobject. Fix it by adding a call to kobject_put() in the error path of kobject_init_and_add(). Signed-off-by: Tobin C. Harding Cc: Greg Kroah-Hartman Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Rafael J. Wysocki Cc: Thomas Gleixner Cc: Tobin C. Harding Cc: Vincent Guittot Cc: Viresh Kumar Link: http://lkml.kernel.org/r/20190430001144.24890-1-tobin@kernel.org Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin commit 4be6fa8929ebcdd3dcfe4dc1dbe963a141bbfda4 Author: Nicholas Piggin Date: Tue Apr 9 14:40:05 2019 +1000 powerpc/watchdog: Use hrtimers for per-CPU heartbeat [ Upstream commit 7ae3f6e130e8dc6188b59e3b4ebc2f16e9c8d053 ] Using a jiffies timer creates a dependency on the tick_do_timer_cpu incrementing jiffies. If that CPU has locked up and jiffies is not incrementing, the watchdog heartbeat timer for all CPUs stops and creates false positives and confusing warnings on local CPUs, and also causes the SMP detector to stop, so the root cause is never detected. Fix this by using hrtimer based timers for the watchdog heartbeat, like the generic kernel hardlockup detector. Cc: Gautham R. Shenoy Reported-by: Ravikumar Bangoria Signed-off-by: Nicholas Piggin Tested-by: Ravi Bangoria Reported-by: Ravi Bangoria Reviewed-by: Gautham R. Shenoy Signed-off-by: Michael Ellerman Signed-off-by: Sasha Levin commit d8893cc7fc82ab7a334be3a1ee061f6335fc0e7c Author: Nadav Amit Date: Thu Apr 25 17:11:29 2019 -0700 x86/ftrace: Set trampoline pages as executable [ Upstream commit 3c0dab44e22782359a0a706cbce72de99a22aa75 ] Since alloc_module() will not set the pages as executable soon, set ftrace trampoline pages as executable after they are allocated. For the time being, do not change ftrace to use the text_poke() interface. As a result, ftrace still breaks W^X. Signed-off-by: Nadav Amit Signed-off-by: Rick Edgecombe Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Steven Rostedt (VMware) Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Dave Hansen Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Rik van Riel Cc: Thomas Gleixner Link: https://lkml.kernel.org/r/20190426001143.4983-10-namit@vmware.com Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin commit 66c6a81c186a94c46053661c198bae90ed333aaa Author: Qian Cai Date: Mon Apr 29 13:37:01 2019 -0400 arm64: Fix compiler warning from pte_unmap() with -Wunused-but-set-variable [ Upstream commit 74dd022f9e6260c3b5b8d15901d27ebcc5f21eda ] When building with -Wunused-but-set-variable, the compiler shouts about a number of pte_unmap() users, since this expands to an empty macro on arm64: | mm/gup.c: In function 'gup_pte_range': | mm/gup.c:1727:16: warning: variable 'ptem' set but not used | [-Wunused-but-set-variable] | mm/gup.c: At top level: | mm/memory.c: In function 'copy_pte_range': | mm/memory.c:821:24: warning: variable 'orig_dst_pte' set but not used | [-Wunused-but-set-variable] | mm/memory.c:821:9: warning: variable 'orig_src_pte' set but not used | [-Wunused-but-set-variable] | mm/swap_state.c: In function 'swap_ra_info': | mm/swap_state.c:641:15: warning: variable 'orig_pte' set but not used | [-Wunused-but-set-variable] | mm/madvise.c: In function 'madvise_free_pte_range': | mm/madvise.c:318:9: warning: variable 'orig_pte' set but not used | [-Wunused-but-set-variable] Rewrite pte_unmap() as a static inline function, which silences the warnings. Signed-off-by: Qian Cai Signed-off-by: Will Deacon Signed-off-by: Sasha Levin commit 71c7bac2e8cf966561d4f4f87e86d9e263837b77 Author: Marc Zyngier Date: Mon Apr 8 16:49:01 2019 +0100 ARM: vdso: Remove dependency with the arch_timer driver internals [ Upstream commit 1f5b62f09f6b314c8d70b9de5182dae4de1f94da ] The VDSO code uses the kernel helper that was originally designed to abstract the access between 32 and 64bit systems. It worked so far because this function is declared as 'inline'. As we're about to revamp that part of the code, the VDSO would break. Let's fix it by doing what should have been done from the start, a proper system register access. Reviewed-by: Mark Rutland Signed-off-by: Marc Zyngier Signed-off-by: Will Deacon Signed-off-by: Sasha Levin commit 3430347bec65e571002ffbc5cee95a6d700ea66f Author: Fabien Dessenne Date: Wed Apr 24 09:25:44 2019 -0400 media: stm32-dcmi: return appropriate error codes during probe [ Upstream commit b5b5a27bee5884860798ffd0f08e611a3942064b ] During probe, return the provided errors value instead of -ENODEV. This allows the driver to be deferred probed if needed. Signed-off-by: Fabien Dessenne Acked-by: Hugues Fruchet Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 149b0223ad22c12e1a31c39ae8bc41b0362f349a Author: Jon Derrick Date: Fri Mar 15 18:05:16 2019 -0600 drm/nouveau/bar/nv50: ensure BAR is mapped [ Upstream commit f10b83de1fd49216a4c657816f48001437e4bdd5 ] If the BAR is zero size, it indicates it was never successfully mapped. Ensure that the BAR is valid during initialization before attempting to use it. Signed-off-by: Jon Derrick Signed-off-by: Ben Skeggs Signed-off-by: Sasha Levin commit 475aa8ef390434ebdaf78cabd7ae8a19d8b75c77 Author: Pierre-Louis Bossart Date: Tue Apr 30 10:52:29 2019 -0500 ACPI / property: fix handling of data_nodes in acpi_get_next_subnode() [ Upstream commit 23583f7795025e3c783b680d906509366b0906ad ] When the DSDT tables expose devices with subdevices and a set of hierarchical _DSD properties, the data returned by acpi_get_next_subnode() is incorrect, with the results suggesting a bad pointer assignment. The parser works fine with device_nodes or data_nodes, but not with a combination of the two. The problem is traced to an invalid pointer used when jumping from handling device_nodes to data nodes. The existing code looks for data nodes below the last subdevice found instead of the common root. Fix by forcing the acpi_device pointer to be derived from the same fwnode for the two types of subnodes. This same problem of handling device and data nodes was already fixed in a similar way by 'commit bf4703fdd166 ("ACPI / property: fix data node parsing in acpi_get_next_subnode()")' but broken later by 'commit 34055190b19 ("ACPI / property: Add fwnode_get_next_child_node()")', so this should probably go to linux-stable all the way to 4.12 Signed-off-by: Pierre-Louis Bossart Reviewed-by: Andy Shevchenko Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit 037f8c6296b6527b3a8df8500b0e5680c0578be2 Author: Dan Carpenter Date: Wed Apr 24 12:52:18 2019 +0300 brcm80211: potential NULL dereference in brcmf_cfg80211_vndr_cmds_dcmd_handler() [ Upstream commit e025da3d7aa4770bb1d1b3b0aa7cc4da1744852d ] If "ret_len" is negative then it could lead to a NULL dereference. The "ret_len" value comes from nl80211_vendor_cmd(), if it's negative then we don't allocate the "dcmd_buf" buffer. Then we pass "ret_len" to brcmf_fil_cmd_data_set() where it is cast to a very high u32 value. Most of the functions in that call tree check whether the buffer we pass is NULL but there are at least a couple places which don't such as brcmf_dbg_hex_dump() and brcmf_msgbuf_query_dcmd(). We memcpy() to and from the buffer so it would result in a NULL dereference. The fix is to change the types so that "ret_len" can't be negative. (If we memcpy() zero bytes to NULL, that's a no-op and doesn't cause an issue). Fixes: 1bacb0487d0e ("brcmfmac: replace cfg80211 testmode with vendor command") Signed-off-by: Dan Carpenter Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin commit 83223e9f4b76b4bfb28a47752d477500efff935f Author: Flavio Suligoi Date: Fri Apr 12 09:32:19 2019 +0200 spi: pxa2xx: fix SCR (divisor) calculation [ Upstream commit 29f2133717c527f492933b0622a4aafe0b3cbe9e ] Calculate the divisor for the SCR (Serial Clock Rate), avoiding that the SSP transmission rate can be greater than the device rate. When the division between the SSP clock and the device rate generates a reminder, we have to increment by one the divisor. In this way the resulting SSP clock will never be greater than the device SPI max frequency. For example, with: - ssp_clk = 50 MHz - dev freq = 15 MHz without this patch the SSP clock will be greater than 15 MHz: - 25 MHz for PXA25x_SSP and CE4100_SSP - 16,56 MHz for the others Instead, with this patch, we have in both case an SSP clock of 12.5MHz, so the max rate of the SPI device clock is respected. Signed-off-by: Flavio Suligoi Reviewed-by: Jarkko Nikula Reviewed-by: Jarkko Nikula Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 24eb6f4636cff530845f627a8d992d1f2c378efb Author: Arnd Bergmann Date: Tue Apr 16 15:12:23 2019 +0200 ASoC: imx: fix fiq dependencies [ Upstream commit ea751227c813ab833609afecfeedaf0aa26f327e ] During randconfig builds, I occasionally run into an invalid configuration of the freescale FIQ sound support: WARNING: unmet direct dependencies detected for SND_SOC_IMX_PCM_FIQ Depends on [m]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_IMX_SOC [=m] Selected by [y]: - SND_SOC_FSL_SPDIF [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_IMX_SOC [=m]!=n && (MXC_TZIC [=n] || MXC_AVIC [=y]) sound/soc/fsl/imx-ssi.o: In function `imx_ssi_remove': imx-ssi.c:(.text+0x28): undefined reference to `imx_pcm_fiq_exit' sound/soc/fsl/imx-ssi.o: In function `imx_ssi_probe': imx-ssi.c:(.text+0xa64): undefined reference to `imx_pcm_fiq_init' The Kconfig warning is a result of the symbol being defined inside of the "if SND_IMX_SOC" block, and is otherwise harmless. The link error is more tricky and happens with SND_SOC_IMX_SSI=y, which may or may not imply FIQ support. However, if SND_SOC_FSL_SSI is set to =m at the same time, that selects SND_SOC_IMX_PCM_FIQ as a loadable module dependency, which then causes a link failure from imx-ssi. The solution here is to make SND_SOC_IMX_PCM_FIQ built-in whenever one of its potential users is built-in. Fixes: ff40260f79dc ("ASoC: fsl: refine DMA/FIQ dependencies") Signed-off-by: Arnd Bergmann Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 0c8df6f57b45ca191a529191fe370bc2018c0271 Author: Claudiu Beznea Date: Wed Apr 24 09:17:59 2019 +0000 spi: atmel-quadspi: fix crash while suspending [ Upstream commit e5c27498a0403b270620b1a8a0a66e3efc222fb6 ] atmel_qspi objects are kept in spi_controller objects, so, first get pointer to spi_controller object and then get atmel_qspi object from spi_controller object. Fixes: 2d30ac5ed633 ("mtd: spi-nor: atmel-quadspi: Use spi-mem interface for atmel-quadspi driver") Signed-off-by: Claudiu Beznea Reviewed-by: Tudor Ambarus Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 54fed8e531c15d2e2037be55a68ca1bef0477849 Author: Anju T Sudhakar Date: Tue Dec 18 11:50:41 2018 +0530 powerpc/perf: Fix loop exit condition in nest_imc_event_init [ Upstream commit 860b7d2286236170a36f94946d03ca9888d32571 ] The data structure (i.e struct imc_mem_info) to hold the memory address information for nest imc units is allocated based on the number of nodes in the system. nest_imc_event_init() traverse this struct array to calculate the memory base address for the event-cpu. If we fail to find a match for the event cpu's chip-id in imc_mem_info struct array, then the do-while loop will iterate until we crash. Fix this by changing the loop exit condition based on the number of non zero vbase elements in the array, since the allocation is done for nr_chips + 1. Reported-by: Dan Carpenter Fixes: 885dcd709ba91 ("powerpc/perf: Add nest IMC PMU support") Signed-off-by: Anju T Sudhakar Reviewed-by: Madhavan Srinivasan Signed-off-by: Michael Ellerman Signed-off-by: Sasha Levin commit fd040f4d8aba1fc5bc30aaf9cd5a1eb075a9fcf5 Author: Bo YU Date: Tue Oct 30 09:21:55 2018 -0400 powerpc/boot: Fix missing check of lseek() return value [ Upstream commit 5d085ec04a000fefb5182d3b03ee46ca96d8389b ] This is detected by Coverity scan: CID: 1440481 Signed-off-by: Bo YU Signed-off-by: Michael Ellerman Signed-off-by: Sasha Levin commit 10101a25c784e6cfa9b3f459734e75b10d22625e Author: Anju T Sudhakar Date: Tue Nov 27 13:54:52 2018 +0530 powerpc/perf: Return accordingly on invalid chip-id in [ Upstream commit a913e5e8b43be1d3897a141ce61c1ec071cad89c ] Nest hardware counter memory resides in a per-chip reserve-memory. During nest_imc_event_init(), chip-id of the event-cpu is considered to calculate the base memory addresss for that cpu. Return, proper error condition if the chip_id calculated is invalid. Reported-by: Dan Carpenter Fixes: 885dcd709ba91 ("powerpc/perf: Add nest IMC PMU support") Reviewed-by: Madhavan Srinivasan Signed-off-by: Anju T Sudhakar Signed-off-by: Michael Ellerman Signed-off-by: Sasha Levin commit d809248f1bfc4a4f4433e01c66319e0997e1ec1d Author: Jerome Brunet Date: Mon Apr 29 15:29:39 2019 +0200 ASoC: hdmi-codec: unlock the device on startup errors [ Upstream commit 30180e8436046344b12813dc954b2e01dfdcd22d ] If the hdmi codec startup fails, it should clear the current_substream pointer to free the device. This is properly done for the audio_startup() callback but for snd_pcm_hw_constraint_eld(). Make sure the pointer cleared if an error is reported. Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 0f0d8c3c475394796b6c9520c06e24ddd1117cfd Author: Fei Yang Date: Tue Mar 19 22:32:20 2019 -0700 usb: gadget: f_fs: don't free buffer prematurely [ Upstream commit 73103c7f958b99561555c3bd1bc1a0809e0b7d61 ] The following kernel panic happens due to the io_data buffer gets deallocated before the async io is completed. Add a check for the case where io_data buffer should be deallocated by ffs_user_copy_worker. [ 41.663334] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 [ 41.672099] #PF error: [normal kernel read fault] [ 41.677356] PGD 20c974067 P4D 20c974067 PUD 20c973067 PMD 0 [ 41.683687] Oops: 0000 [#1] PREEMPT SMP [ 41.687976] CPU: 1 PID: 7 Comm: kworker/u8:0 Tainted: G U 5.0.0-quilt-2e5dc0ac-00790-gd8c79f2-dirty #2 [ 41.705309] Workqueue: adb ffs_user_copy_worker [ 41.705316] RIP: 0010:__vunmap+0x2a/0xc0 [ 41.705318] Code: 0f 1f 44 00 00 48 85 ff 0f 84 87 00 00 00 55 f7 c7 ff 0f 00 00 48 89 e5 41 55 41 89 f5 41 54 53 48 89 fb 75 71 e8 56 d7 ff ff <4c> 8b 60 48 4d 85 e4 74 76 48 89 df e8 25 ff ff ff 45 85 ed 74 46 [ 41.705320] RSP: 0018:ffffbc3a40053df0 EFLAGS: 00010286 [ 41.705322] RAX: 0000000000000000 RBX: ffffbc3a406f1000 RCX: 0000000000000000 [ 41.705323] RDX: 0000000000000001 RSI: 0000000000000001 RDI: 00000000ffffffff [ 41.705324] RBP: ffffbc3a40053e08 R08: 000000000001fb79 R09: 0000000000000037 [ 41.705325] R10: ffffbc3a40053b68 R11: ffffbc3a40053cad R12: fffffffffffffff2 [ 41.705326] R13: 0000000000000001 R14: 0000000000000000 R15: ffffffffffffffff [ 41.705328] FS: 0000000000000000(0000) GS:ffff9e2977a80000(0000) knlGS:0000000000000000 [ 41.705329] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 41.705330] CR2: 0000000000000048 CR3: 000000020c994000 CR4: 00000000003406e0 [ 41.705331] Call Trace: [ 41.705338] vfree+0x50/0xb0 [ 41.705341] ffs_user_copy_worker+0xe9/0x1c0 [ 41.705344] process_one_work+0x19f/0x3e0 [ 41.705348] worker_thread+0x3f/0x3b0 [ 41.829766] kthread+0x12b/0x150 [ 41.833371] ? process_one_work+0x3e0/0x3e0 [ 41.838045] ? kthread_create_worker_on_cpu+0x70/0x70 [ 41.843695] ret_from_fork+0x3a/0x50 [ 41.847689] Modules linked in: hci_uart bluetooth ecdh_generic rfkill_gpio dwc3_pci dwc3 snd_usb_audio mei_me tpm_crb snd_usbmidi_lib xhci_pci xhci_hcd mei tpm snd_hwdep cfg80211 snd_soc_skl snd_soc_skl_ipc snd_soc_sst_ipc snd_soc_sst_dsp snd_hda_ext_core snd_hda_core videobuf2_dma_sg crlmodule [ 41.876880] CR2: 0000000000000048 [ 41.880584] ---[ end trace 2bc4addff0f2e673 ]--- [ 41.891346] RIP: 0010:__vunmap+0x2a/0xc0 [ 41.895734] Code: 0f 1f 44 00 00 48 85 ff 0f 84 87 00 00 00 55 f7 c7 ff 0f 00 00 48 89 e5 41 55 41 89 f5 41 54 53 48 89 fb 75 71 e8 56 d7 ff ff <4c> 8b 60 48 4d 85 e4 74 76 48 89 df e8 25 ff ff ff 45 85 ed 74 46 [ 41.916740] RSP: 0018:ffffbc3a40053df0 EFLAGS: 00010286 [ 41.922583] RAX: 0000000000000000 RBX: ffffbc3a406f1000 RCX: 0000000000000000 [ 41.930563] RDX: 0000000000000001 RSI: 0000000000000001 RDI: 00000000ffffffff [ 41.938540] RBP: ffffbc3a40053e08 R08: 000000000001fb79 R09: 0000000000000037 [ 41.946520] R10: ffffbc3a40053b68 R11: ffffbc3a40053cad R12: fffffffffffffff2 [ 41.954502] R13: 0000000000000001 R14: 0000000000000000 R15: ffffffffffffffff [ 41.962482] FS: 0000000000000000(0000) GS:ffff9e2977a80000(0000) knlGS:0000000000000000 [ 41.971536] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 41.977960] CR2: 0000000000000048 CR3: 000000020c994000 CR4: 00000000003406e0 [ 41.985930] Kernel panic - not syncing: Fatal exception [ 41.991817] Kernel Offset: 0x16000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 42.009525] Rebooting in 10 seconds.. [ 52.014376] ACPI MEMORY or I/O RESET_REG. Fixes: 772a7a724f69 ("usb: gadget: f_fs: Allow scatter-gather buffers") Signed-off-by: Fei Yang Reviewed-by: Manu Gautam Tested-by: John Stultz Signed-off-by: Felipe Balbi Signed-off-by: Sasha Levin commit d9681887b3249f37854775bd899beacb820d4aa2 Author: Marek Szyprowski Date: Wed Mar 27 10:56:08 2019 +0100 usb: dwc3: move synchronize_irq() out of the spinlock protected block [ Upstream commit 41a91c606e7d2b74358a944525267cc451c271e8 ] dwc3_gadget_suspend() is called under dwc->lock spinlock. In such context calling synchronize_irq() is not allowed. Move the problematic call out of the protected block to fix the following kernel BUG during system suspend: BUG: sleeping function called from invalid context at kernel/irq/manage.c:112 in_atomic(): 1, irqs_disabled(): 128, pid: 1601, name: rtcwake 6 locks held by rtcwake/1601: #0: f70ac2a2 (sb_writers#7){.+.+}, at: vfs_write+0x130/0x16c #1: b5fe1270 (&of->mutex){+.+.}, at: kernfs_fop_write+0xc0/0x1e4 #2: 7e597705 (kn->count#60){.+.+}, at: kernfs_fop_write+0xc8/0x1e4 #3: 8b3527d0 (system_transition_mutex){+.+.}, at: pm_suspend+0xc4/0xc04 #4: fc7f1c42 (&dev->mutex){....}, at: __device_suspend+0xd8/0x74c #5: 4b36507e (&(&dwc->lock)->rlock){....}, at: dwc3_gadget_suspend+0x24/0x3c irq event stamp: 11252 hardirqs last enabled at (11251): [] _raw_spin_unlock_irqrestore+0x6c/0x74 hardirqs last disabled at (11252): [] _raw_spin_lock_irqsave+0x1c/0x5c softirqs last enabled at (9744): [] __do_softirq+0x3a4/0x66c softirqs last disabled at (9737): [] irq_exit+0x140/0x168 Preemption disabled at: [<00000000>] (null) CPU: 7 PID: 1601 Comm: rtcwake Not tainted 5.0.0-rc3-next-20190122-00039-ga3f4ee4f8a52 #5252 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x90/0xc8) [] (dump_stack) from [] (___might_sleep+0x22c/0x2c8) [] (___might_sleep) from [] (synchronize_irq+0x28/0x84) [] (synchronize_irq) from [] (dwc3_gadget_suspend+0x34/0x3c) [] (dwc3_gadget_suspend) from [] (dwc3_suspend_common+0x154/0x410) [] (dwc3_suspend_common) from [] (dwc3_suspend+0x14/0x2c) [] (dwc3_suspend) from [] (platform_pm_suspend+0x2c/0x54) [] (platform_pm_suspend) from [] (dpm_run_callback+0xa4/0x3dc) [] (dpm_run_callback) from [] (__device_suspend+0x134/0x74c) [] (__device_suspend) from [] (dpm_suspend+0x174/0x588) [] (dpm_suspend) from [] (suspend_devices_and_enter+0xc0/0xe74) [] (suspend_devices_and_enter) from [] (pm_suspend+0x770/0xc04) [] (pm_suspend) from [] (state_store+0x6c/0xcc) [] (state_store) from [] (kobj_attr_store+0x14/0x20) [] (kobj_attr_store) from [] (sysfs_kf_write+0x4c/0x50) [] (sysfs_kf_write) from [] (kernfs_fop_write+0xfc/0x1e4) [] (kernfs_fop_write) from [] (__vfs_write+0x2c/0x160) [] (__vfs_write) from [] (vfs_write+0xa4/0x16c) [] (vfs_write) from [] (ksys_write+0x40/0x8c) [] (ksys_write) from [] (ret_fast_syscall+0x0/0x28) Exception stack(0xed55ffa8 to 0xed55fff0) ... Fixes: 01c10880d242 ("usb: dwc3: gadget: synchronize_irq dwc irq in suspend") Signed-off-by: Marek Szyprowski Signed-off-by: Felipe Balbi Signed-off-by: Sasha Levin commit 77853fa647912e8ffd2ae418dd5258923645691e Author: Minas Harutyunyan Date: Mon Mar 18 14:24:30 2019 +0400 usb: dwc2: gadget: Increase descriptors count for ISOC's [ Upstream commit 54f37f56631747075f1f9a2f0edf6ba405e3e66c ] Some function drivers queueing more than 128 ISOC requests at a time. To avoid "descriptor chain full" cases, increasing descriptors count from MAX_DMA_DESC_NUM_GENERIC to MAX_DMA_DESC_NUM_HS_ISOC for ISOC's only. Signed-off-by: Minas Harutyunyan Signed-off-by: Felipe Balbi Signed-off-by: Sasha Levin commit df53990094e9e2f8fe98f3a76dcd2be3c43edd6f Author: Mac Chiang Date: Thu May 2 14:12:04 2019 +0800 ASoC: Intel: kbl_da7219_max98357a: Map BTN_0 to KEY_PLAYPAUSE [ Upstream commit 16ec5dfe0327ddcf279957bffe4c8fe527088c63 ] On kbl_rt5663_max98927, commit 38a5882e4292 ("ASoC: Intel: kbl_rt5663_max98927: Map BTN_0 to KEY_PLAYPAUSE") This key pair mapping to play/pause when playing Youtube The Android 3.5mm Headset jack specification mentions that BTN_0 should be mapped to KEY_MEDIA, but this is less logical than KEY_PLAYPAUSE, which has much broader userspace support. For example, the Chrome OS userspace now supports KEY_PLAYPAUSE to toggle play/pause of videos and audio, but does not handle KEY_MEDIA. Furthermore, Android itself now supports KEY_PLAYPAUSE equivalently, as the new USB headset spec requires KEY_PLAYPAUSE for BTN_0. https://source.android.com/devices/accessories/headset/usb-headset-spec The same fix is required on Chrome kbl_da7219_max98357a. Signed-off-by: Mac Chiang Reviewed-by: Benson Leung Acked-by: Pierre-Louis Bossart Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 18b1bee822c2a0757c7c211ff75dbf5f0e9d6824 Author: Wen Yang Date: Fri Apr 12 14:02:23 2019 +0800 pinctrl: zte: fix leaked of_node references [ Upstream commit 02d15f0d80720545f1f4922a1550ea4aaad4e152 ] The call to of_parse_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/pinctrl/zte/pinctrl-zx.c:415:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function. ./drivers/pinctrl/zte/pinctrl-zx.c:422:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function. ./drivers/pinctrl/zte/pinctrl-zx.c:436:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function. ./drivers/pinctrl/zte/pinctrl-zx.c:444:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function. ./drivers/pinctrl/zte/pinctrl-zx.c:448:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function. Signed-off-by: Wen Yang Cc: Linus Walleij Cc: Jun Nie Cc: Linus Walleij Cc: linux-gpio@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: Shawn Guo Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin commit 0e061885bfcd65ef5d09f154f3c3c3491cc7544a Author: João Paulo Rechi Vita Date: Thu May 2 10:01:52 2019 +0800 Bluetooth: Ignore CC events not matching the last HCI command [ Upstream commit f80c5dad7b6467b884c445ffea45985793b4b2d0 ] This commit makes the kernel not send the next queued HCI command until a command complete arrives for the last HCI command sent to the controller. This change avoids a problem with some buggy controllers (seen on two SKUs of QCA9377) that send an extra command complete event for the previous command after the kernel had already sent a new HCI command to the controller. The problem was reproduced when starting an active scanning procedure, where an extra command complete event arrives for the LE_SET_RANDOM_ADDR command. When this happends the kernel ends up not processing the command complete for the following commmand, LE_SET_SCAN_PARAM, and ultimately behaving as if a passive scanning procedure was being performed, when in fact controller is performing an active scanning procedure. This makes it impossible to discover BLE devices as no device found events are sent to userspace. This problem is reproducible on 100% of the attempts on the affected controllers. The extra command complete event can be seen at timestamp 27.420131 on the btmon logs bellow. Bluetooth monitor ver 5.50 = Note: Linux version 5.0.0+ (x86_64) 0.352340 = Note: Bluetooth subsystem version 2.22 0.352343 = New Index: 80:C5:F2:8F:87:84 (Primary,USB,hci0) [hci0] 0.352344 = Open Index: 80:C5:F2:8F:87:84 [hci0] 0.352345 = Index Info: 80:C5:F2:8F:87:84 (Qualcomm) [hci0] 0.352346 @ MGMT Open: bluetoothd (privileged) version 1.14 {0x0001} 0.352347 @ MGMT Open: btmon (privileged) version 1.14 {0x0002} 0.352366 @ MGMT Open: btmgmt (privileged) version 1.14 {0x0003} 27.302164 @ MGMT Command: Start Discovery (0x0023) plen 1 {0x0003} [hci0] 27.302310 Address type: 0x06 LE Public LE Random < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #1 [hci0] 27.302496 Address: 15:60:F2:91:B2:24 (Non-Resolvable) > HCI Event: Command Complete (0x0e) plen 4 #2 [hci0] 27.419117 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #3 [hci0] 27.419244 Type: Active (0x01) Interval: 11.250 msec (0x0012) Window: 11.250 msec (0x0012) Own address type: Random (0x01) Filter policy: Accept all advertisement (0x00) > HCI Event: Command Complete (0x0e) plen 4 #4 [hci0] 27.420131 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #5 [hci0] 27.420259 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #6 [hci0] 27.420969 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) > HCI Event: Command Complete (0x0e) plen 4 #7 [hci0] 27.421983 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 4 {0x0003} [hci0] 27.422059 Start Discovery (0x0023) plen 1 Status: Success (0x00) Address type: 0x06 LE Public LE Random @ MGMT Event: Discovering (0x0013) plen 2 {0x0003} [hci0] 27.422067 Address type: 0x06 LE Public LE Random Discovery: Enabled (0x01) @ MGMT Event: Discovering (0x0013) plen 2 {0x0002} [hci0] 27.422067 Address type: 0x06 LE Public LE Random Discovery: Enabled (0x01) @ MGMT Event: Discovering (0x0013) plen 2 {0x0001} [hci0] 27.422067 Address type: 0x06 LE Public LE Random Discovery: Enabled (0x01) Signed-off-by: João Paulo Rechi Vita Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin commit 787e73c289891e60ba4005a323e6dc9b74055434 Author: Haiyang Zhang Date: Tue Apr 30 19:29:07 2019 +0000 hv_netvsc: fix race that may miss tx queue wakeup [ Upstream commit 93aa4792c3908eac87ddd368ee0fe0564148232b ] When the ring buffer is almost full due to RX completion messages, a TX packet may reach the "low watermark" and cause the queue stopped. If the TX completion arrives earlier than queue stopping, the wakeup may be missed. This patch moves the check for the last pending packet to cover both EAGAIN and success cases, so the queue will be reliably waked up when necessary. Reported-and-tested-by: Stephan Klein Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 80f2adc0ff0c72a9c2a7e32b2dcd40f7f7059a3c Author: Sameeh Jubran Date: Wed May 1 16:47:04 2019 +0300 net: ena: fix: set freed objects to NULL to avoid failing future allocations [ Upstream commit 8ee8ee7fe87bf64738ab4e31be036a7165608b27 ] In some cases when a queue related allocation fails, successful past allocations are freed but the pointer that pointed to them is not set to NULL. This is a problem for 2 reasons: 1. This is generally a bad practice since this pointer might be accidentally accessed in the future. 2. Future allocations using the same pointer check if the pointer is NULL and fail if it is not. Fixed this by setting such pointers to NULL in the allocation of queue related objects. Also refactored the code of ena_setup_tx_resources() to goto-style error handling to avoid code duplication of resource freeing. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Arthur Kiyanovski Signed-off-by: Sameeh Jubran Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 9aa0dd1f22522dd47d2926c3b84c888fc334e42a Author: Sameeh Jubran Date: Wed May 1 16:47:10 2019 +0300 net: ena: gcc 8: fix compilation warning [ Upstream commit f913308879bc6ae437ce64d878c7b05643ddea44 ] GCC 8 contains a number of new warnings as well as enhancements to existing checkers. The warning - Wstringop-truncation - warns for calls to bounded string manipulation functions such as strncat, strncpy, and stpncpy that may either truncate the copied string or leave the destination unchanged. In our case the destination string length (32 bytes) is much shorter than the source string (64 bytes) which causes this warning to show up. In general the destination has to be at least a byte larger than the length of the source string with strncpy for this warning not to showup. This can be easily fixed by using strlcpy instead which already does the truncation to the string. Documentation for this function can be found here: https://elixir.bootlin.com/linux/latest/source/lib/string.c#L141 Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Sameeh Jubran Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 4f65fe74a93cdfef835d3a014fa383f59d06e2b4 Author: Sameer Pujar Date: Thu May 2 18:25:16 2019 +0530 dmaengine: tegra210-dma: free dma controller in remove() [ Upstream commit f030e419501cb95e961e9ed35c493b5d46a04eca ] Following kernel panic is seen during DMA driver unload->load sequence ========================================================================== Unable to handle kernel paging request at virtual address ffffff8001198880 Internal error: Oops: 86000007 [#1] PREEMPT SMP CPU: 0 PID: 5907 Comm: HwBinder:4123_1 Tainted: G C 4.9.128-tegra-g065839f Hardware name: galen (DT) task: ffffffc3590d1a80 task.stack: ffffffc3d0678000 PC is at 0xffffff8001198880 LR is at of_dma_request_slave_channel+0xd8/0x1f8 pc : [] lr : [] pstate: 60400045 sp : ffffffc3d067b710 x29: ffffffc3d067b710 x28: 000000000000002f x27: ffffff800949e000 x26: ffffff800949e750 x25: ffffff800949e000 x24: ffffffbefe817d84 x23: ffffff8009f77cb0 x22: 0000000000000028 x21: ffffffc3ffda49c8 x20: 0000000000000029 x19: 0000000000000001 x18: ffffffffffffffff x17: 0000000000000000 x16: ffffff80082b66a0 x15: ffffff8009e78250 x14: 000000000000000a x13: 0000000000000038 x12: 0101010101010101 x11: 0000000000000030 x10: 0101010101010101 x9 : fffffffffffffffc x8 : 7f7f7f7f7f7f7f7f x7 : 62ff726b6b64622c x6 : 0000000000008064 x5 : 6400000000000000 x4 : ffffffbefe817c44 x3 : ffffffc3ffda3e08 x2 : ffffff8001198880 x1 : ffffffc3d48323c0 x0 : ffffffc3d067b788 Process HwBinder:4123_1 (pid: 5907, stack limit = 0xffffffc3d0678028) Call trace: [] 0xffffff8001198880 [] dma_request_chan+0x50/0x1f0 [] dma_request_slave_channel+0x28/0x40 [] tegra_alt_pcm_open+0x114/0x170 [] soc_pcm_open+0x10c/0x878 [] snd_pcm_open_substream+0xc0/0x170 [] snd_pcm_open+0xc4/0x240 [] snd_pcm_playback_open+0x58/0x80 [] snd_open+0xb4/0x178 [] chrdev_open+0xb8/0x1d0 [] do_dentry_open+0x214/0x318 [] vfs_open+0x58/0x88 [] do_last+0x450/0xde0 [] path_openat+0xa8/0x368 [] do_filp_open+0x8c/0x110 [] do_sys_open+0x164/0x220 [] compat_SyS_openat+0x3c/0x50 [] el0_svc_naked+0x34/0x38 ---[ end trace 67e6d544e65b5145 ]--- Kernel panic - not syncing: Fatal exception ========================================================================== In device probe(), of_dma_controller_register() registers DMA controller. But when driver is removed, this is not freed. During driver reload this results in data abort and kernel panic. Add of_dma_controller_free() in driver remove path to fix the issue. Fixes: f46b195799b5 ("dmaengine: tegra-adma: Add support for Tegra210 ADMA") Signed-off-by: Sameer Pujar Reviewed-by: Jon Hunter Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin commit 84b77325e369c0e8c02ad281bcc44c7fc5665627 Author: Ming Lei Date: Tue Apr 30 09:52:23 2019 +0800 blk-mq: grab .q_usage_counter when queuing request from plug code path [ Upstream commit e87eb301bee183d82bb3d04bd71b6660889a2588 ] Just like aio/io_uring, we need to grab 2 refcount for queuing one request, one is for submission, another is for completion. If the request isn't queued from plug code path, the refcount grabbed in generic_make_request() serves for submission. In theroy, this refcount should have been released after the sumission(async run queue) is done. blk_freeze_queue() works with blk_sync_queue() together for avoiding race between cleanup queue and IO submission, given async run queue activities are canceled because hctx->run_work is scheduled with the refcount held, so it is fine to not hold the refcount when running the run queue work function for dispatch IO. However, if request is staggered into plug list, and finally queued from plug code path, the refcount in submission side is actually missed. And we may start to run queue after queue is removed because the queue's kobject refcount isn't guaranteed to be grabbed in flushing plug list context, then kernel oops is triggered, see the following race: blk_mq_flush_plug_list(): blk_mq_sched_insert_requests() insert requests to sw queue or scheduler queue blk_mq_run_hw_queue Because of concurrent run queue, all requests inserted above may be completed before calling the above blk_mq_run_hw_queue. Then queue can be freed during the above blk_mq_run_hw_queue(). Fixes the issue by grab .q_usage_counter before calling blk_mq_sched_insert_requests() in blk_mq_flush_plug_list(). This way is safe because the queue is absolutely alive before inserting request. Cc: Dongli Zhang Cc: James Smart Cc: linux-scsi@vger.kernel.org, Cc: Martin K . Petersen , Cc: Christoph Hellwig , Cc: James E . J . Bottomley , Reviewed-by: Bart Van Assche Tested-by: James Smart Signed-off-by: Ming Lei Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit 3621d6e5b0356920bfc71e1ffa7098bd51342ccb Author: Ming Lei Date: Tue Apr 30 09:52:26 2019 +0800 blk-mq: split blk_mq_alloc_and_init_hctx into two parts [ Upstream commit 7c6c5b7c9186e3fb5b10afb8e5f710ae661144c6 ] Split blk_mq_alloc_and_init_hctx into two parts, and one is blk_mq_alloc_hctx() for allocating all hctx resources, another is blk_mq_init_hctx() for initializing hctx, which serves as counter-part of blk_mq_exit_hctx(). Cc: Dongli Zhang Cc: James Smart Cc: Bart Van Assche Cc: linux-scsi@vger.kernel.org Cc: Martin K . Petersen Cc: Christoph Hellwig Cc: James E . J . Bottomley Reviewed-by: Hannes Reinecke Reviewed-by: Christoph Hellwig Tested-by: James Smart Signed-off-by: Ming Lei Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit 57fbf874e4e6e99ac2653ec82883a27016d27e66 Author: Tony Nguyen Date: Tue Apr 16 10:21:23 2019 -0700 ice: Separate if conditions for ice_set_features() [ Upstream commit 8f529ff912073f778e3cd74e87fb69a36499fc2f ] Set features can have multiple features turned on|off in a single call. Grouping these all in an if/else means after one condition is met, other conditions/features will not be evaluated. Break the if/else statements by feature to ensure all features will be handled properly. Signed-off-by: Tony Nguyen Signed-off-by: Anirudh Venkataramanan Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin commit a310ec9bc959b454f2bb1019b7e65bc3861a1db1 Author: Masahiro Yamada Date: Wed May 1 22:45:59 2019 +0900 bpftool: exclude bash-completion/bpftool from .gitignore pattern [ Upstream commit a7d006714724de4334c5e3548701b33f7b12ca96 ] tools/bpf/bpftool/.gitignore has the "bpftool" pattern, which is intended to ignore the following build artifact: tools/bpf/bpftool/bpftool However, the .gitignore entry is effective not only for the current directory, but also for any sub-directories. So, from the point of .gitignore grammar, the following check-in file is also considered to be ignored: tools/bpf/bpftool/bash-completion/bpftool As the manual gitignore(5) says "Files already tracked by Git are not affected", this is not a problem as far as Git is concerned. However, Git is not the only program that parses .gitignore because .gitignore is useful to distinguish build artifacts from source files. For example, tar(1) supports the --exclude-vcs-ignore option. As of writing, this option does not work perfectly, but it intends to create a tarball excluding files specified by .gitignore. So, I believe it is better to fix this issue. You can fix it by prefixing the pattern with a slash; the leading slash means the specified pattern is relative to the current directory. Signed-off-by: Masahiro Yamada Reviewed-by: Quentin Monnet Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin commit 2157413e4692acb32704740c1d682ca8a65138cd Author: Yonghong Song Date: Mon Apr 29 16:59:38 2019 -0700 selftests/bpf: set RLIMIT_MEMLOCK properly for test_libbpf_open.c [ Upstream commit 6cea33701eb024bc6c920ab83940ee22afd29139 ] Test test_libbpf.sh failed on my development server with failure -bash-4.4$ sudo ./test_libbpf.sh [0] libbpf: Error in bpf_object__probe_name():Operation not permitted(1). Couldn't load basic 'r0 = 0' BPF program. test_libbpf: failed at file test_l4lb.o selftests: test_libbpf [FAILED] -bash-4.4$ The reason is because my machine has 64KB locked memory by default which is not enough for this program to get locked memory. Similar to other bpf selftests, let us increase RLIMIT_MEMLOCK to infinity, which fixed the issue. Signed-off-by: Yonghong Song Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin commit 0035a5ede5da48333f669ca6fa6c167fe661bde1 Author: Vineet Gupta Date: Thu May 2 08:56:50 2019 -0700 tools/bpf: fix perf build error with uClibc (seen on ARC) [ Upstream commit ca31ca8247e2d3807ff5fa1d1760616a2292001c ] When build perf for ARC recently, there was a build failure due to lack of __NR_bpf. | Auto-detecting system features: | | ... get_cpuid: [ OFF ] | ... bpf: [ on ] | | # error __NR_bpf not defined. libbpf does not support your arch. ^~~~~ | bpf.c: In function 'sys_bpf': | bpf.c:66:17: error: '__NR_bpf' undeclared (first use in this function) | return syscall(__NR_bpf, cmd, attr, size); | ^~~~~~~~ | sys_bpf Signed-off-by: Vineet Gupta Acked-by: Yonghong Song Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin commit aad5511b638d8159763c28ed2234b73836044d33 Author: Raul E Rangel Date: Mon Apr 29 11:32:39 2019 -0600 mmc: core: Verify SD bus width [ Upstream commit 9e4be8d03f50d1b25c38e2b59e73b194c130df7d ] The SD Physical Layer Spec says the following: Since the SD Memory Card shall support at least the two bus modes 1-bit or 4-bit width, then any SD Card shall set at least bits 0 and 2 (SD_BUS_WIDTH="0101"). This change verifies the card has specified a bus width. AMD SDHC Device 7806 can get into a bad state after a card disconnect where anything transferred via the DATA lines will always result in a zero filled buffer. Currently the driver will continue without error if the HC is in this condition. A block device will be created, but reading from it will result in a zero buffer. This makes it seem like the SD device has been erased, when in actuality the data is never getting copied from the DATA lines to the data buffer. SCR is the first command in the SD initialization sequence that uses the DATA lines. By checking that the response was invalid, we can abort mounting the card. Reviewed-by: Avri Altman Signed-off-by: Raul E Rangel Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin commit bd2447bbc91c7559a8b44e8e470407f94cd73c3c Author: Andreas Gruenbacher Date: Thu Apr 4 21:11:11 2019 +0100 gfs2: Fix occasional glock use-after-free [ Upstream commit 9287c6452d2b1f24ea8e84bd3cf6f3c6f267f712 ] This patch has to do with the life cycle of glocks and buffers. When gfs2 metadata or journaled data is queued to be written, a gfs2_bufdata object is assigned to track the buffer, and that is queued to various lists, including the glock's gl_ail_list to indicate it's on the active items list. Once the page associated with the buffer has been written, it is removed from the ail list, but its life isn't over until a revoke has been successfully written. So after the block is written, its bufdata object is moved from the glock's gl_ail_list to a file-system-wide list of pending revokes, sd_log_le_revoke. At that point the glock still needs to track how many revokes it contributed to that list (in gl_revokes) so that things like glock go_sync can ensure all the metadata has been not only written, but also revoked before the glock is granted to a different node. This is to guarantee journal replay doesn't replay the block once the glock has been granted to another node. Ross Lagerwall recently discovered a race in which an inode could be evicted, and its glock freed after its ail list had been synced, but while it still had unwritten revokes on the sd_log_le_revoke list. The evict decremented the glock reference count to zero, which allowed the glock to be freed. After the revoke was written, function revoke_lo_after_commit tried to adjust the glock's gl_revokes counter and clear its GLF_LFLUSH flag, at which time it referenced the freed glock. This patch fixes the problem by incrementing the glock reference count in gfs2_add_revoke when the glock's first bufdata object is moved from the glock to the global revokes list. Later, when the glock's last such bufdata object is freed, the reference count is decremented. This guarantees that whichever process finishes last (the revoke writing or the evict) will properly free the glock, and neither will reference the glock after it has been freed. Reported-by: Ross Lagerwall Signed-off-by: Andreas Gruenbacher Signed-off-by: Bob Peterson Signed-off-by: Sasha Levin commit 30e55df1d1bbcd073cbbba751a92487cb008fdf8 Author: Mike Marciniszyn Date: Mon Mar 18 09:55:09 2019 -0700 IB/hfi1: Fix WQ_MEM_RECLAIM warning [ Upstream commit 4c4b1996b5db688e2dcb8242b0a3bf7b1e845e42 ] The work_item cancels that occur when a QP is destroyed can elicit the following trace: workqueue: WQ_MEM_RECLAIM ipoib_wq:ipoib_cm_tx_reap [ib_ipoib] is flushing !WQ_MEM_RECLAIM hfi0_0:_hfi1_do_send [hfi1] WARNING: CPU: 7 PID: 1403 at kernel/workqueue.c:2486 check_flush_dependency+0xb1/0x100 Call Trace: __flush_work.isra.29+0x8c/0x1a0 ? __switch_to_asm+0x40/0x70 __cancel_work_timer+0x103/0x190 ? schedule+0x32/0x80 iowait_cancel_work+0x15/0x30 [hfi1] rvt_reset_qp+0x1f8/0x3e0 [rdmavt] rvt_destroy_qp+0x65/0x1f0 [rdmavt] ? _cond_resched+0x15/0x30 ib_destroy_qp+0xe9/0x230 [ib_core] ipoib_cm_tx_reap+0x21c/0x560 [ib_ipoib] process_one_work+0x171/0x370 worker_thread+0x49/0x3f0 kthread+0xf8/0x130 ? max_active_store+0x80/0x80 ? kthread_bind+0x10/0x10 ret_from_fork+0x35/0x40 Since QP destruction frees memory, hfi1_wq should have the WQ_MEM_RECLAIM. The hfi1_wq does not allocate memory with GFP_KERNEL or otherwise become entangled with memory reclaim, so this flag is appropriate. Fixes: 0a226edd203f ("staging/rdma/hfi1: Use parallel workqueue for SDMA engines") Reviewed-by: Michael J. Ruhl Signed-off-by: Mike Marciniszyn Signed-off-by: Dennis Dalessandro Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin commit 04b6d06600f75491d9587759fffc269ca5e3fd80 Author: Abhi Das Date: Tue Apr 30 16:53:47 2019 -0500 gfs2: fix race between gfs2_freeze_func and unmount [ Upstream commit 8f91821990fd6f170a5dca79697a441181a41b16 ] As part of the freeze operation, gfs2_freeze_func() is left blocking on a request to hold the sd_freeze_gl in SH. This glock is held in EX by the gfs2_freeze() code. A subsequent call to gfs2_unfreeze() releases the EXclusively held sd_freeze_gl, which allows gfs2_freeze_func() to acquire it in SH and resume its operation. gfs2_unfreeze(), however, doesn't wait for gfs2_freeze_func() to complete. If a umount is issued right after unfreeze, it could result in an inconsistent filesystem because some journal data (statfs update) isn't written out. Refer to commit 24972557b12c for a more detailed explanation of how freeze/unfreeze work. This patch causes gfs2_unfreeze() to wait for gfs2_freeze_func() to complete before returning to the user. Signed-off-by: Abhi Das Signed-off-by: Andreas Gruenbacher Signed-off-by: Sasha Levin commit b26a8378fdedd78fdd4df08111d5774c23bbb036 Author: Roberto Bergantinos Corpas Date: Thu Apr 25 15:36:51 2019 +0200 NFS: make nfs_match_client killable [ Upstream commit 950a578c6128c2886e295b9c7ecb0b6b22fcc92b ] Actually we don't do anything with return value from nfs_wait_client_init_complete in nfs_match_client, as a consequence if we get a fatal signal and client is not fully initialised, we'll loop to "again" label This has been proven to cause soft lockups on some scenarios (no-carrier but configured network interfaces) Signed-off-by: Roberto Bergantinos Corpas Reviewed-by: Benjamin Coddington Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin commit 07ef782e64d0803e8e38c1fec9f03f1ee3afda85 Author: David Howells Date: Wed May 1 15:58:24 2019 +0100 afs: Fix getting the afs.fid xattr [ Upstream commit a2f611a3dc317d8ea1c98ad6c54b911cf7f93193 ] The AFS3 FID is three 32-bit unsigned numbers and is represented as three up-to-8-hex-digit numbers separated by colons to the afs.fid xattr. However, with the advent of support for YFS, the FID is now a 64-bit volume number, a 96-bit vnode/inode number and a 32-bit uniquifier (as before). Whilst the sprintf in afs_xattr_get_fid() has been partially updated (it currently ignores the upper 32 bits of the 96-bit vnode number), the size of the stack-based buffer has not been increased to match, thereby allowing stack corruption to occur. Fix this by increasing the buffer size appropriately and conditionally including the upper part of the vnode number if it is non-zero. The latter requires the lower part to be zero-padded if the upper part is non-zero. Fixes: 3b6492df4153 ("afs: Increase to 64-bit volume ID and 96-bit vnode ID for YFS") Signed-off-by: David Howells Signed-off-by: Sasha Levin commit 366db1381145cb500097ced80d960c64d6162e38 Author: YueHaibing Date: Mon May 6 23:57:54 2019 +0800 cxgb4: Fix error path in cxgb4_init_module [ Upstream commit a3147770bea76c8dbad73eca3a24c2118da5e719 ] BUG: unable to handle kernel paging request at ffffffffa016a270 PGD 3270067 P4D 3270067 PUD 3271063 PMD 230bbd067 PTE 0 Oops: 0000 [#1 CPU: 0 PID: 6134 Comm: modprobe Not tainted 5.1.0+ #33 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:atomic_notifier_chain_register+0x24/0x60 Code: 1f 80 00 00 00 00 55 48 89 e5 41 54 49 89 f4 53 48 89 fb e8 ae b4 38 01 48 8b 53 38 48 8d 4b 38 48 85 d2 74 20 45 8b 44 24 10 <44> 3b 42 10 7e 08 eb 13 44 39 42 10 7c 0d 48 8d 4a 08 48 8b 52 08 RSP: 0018:ffffc90000e2bc60 EFLAGS: 00010086 RAX: 0000000000000292 RBX: ffffffff83467240 RCX: ffffffff83467278 RDX: ffffffffa016a260 RSI: ffffffff83752140 RDI: ffffffff83467240 RBP: ffffc90000e2bc70 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 00000000014fa61f R12: ffffffffa01c8260 R13: ffff888231091e00 R14: 0000000000000000 R15: ffffc90000e2be78 FS: 00007fbd8d7cd540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa016a270 CR3: 000000022c7e3000 CR4: 00000000000006f0 Call Trace: register_inet6addr_notifier+0x13/0x20 cxgb4_init_module+0x6c/0x1000 [cxgb4 ? 0xffffffffa01d7000 do_one_initcall+0x6c/0x3cc ? do_init_module+0x22/0x1f1 ? rcu_read_lock_sched_held+0x97/0xb0 ? kmem_cache_alloc_trace+0x325/0x3b0 do_init_module+0x5b/0x1f1 load_module+0x1db1/0x2690 ? m_show+0x1d0/0x1d0 __do_sys_finit_module+0xc5/0xd0 __x64_sys_finit_module+0x15/0x20 do_syscall_64+0x6b/0x1d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe If pci_register_driver fails, register inet6addr_notifier is pointless. This patch fix the error path in cxgb4_init_module. Fixes: b5a02f503caa ("cxgb4 : Update ipv6 address handling api") Signed-off-by: YueHaibing Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 1e7a416fb765c9072479dc424780c0937ba99270 Author: Ross Lagerwall Date: Wed Mar 27 17:09:17 2019 +0000 gfs2: Fix lru_count going negative [ Upstream commit 7881ef3f33bb80f459ea6020d1e021fc524a6348 ] Under certain conditions, lru_count may drop below zero resulting in a large amount of log spam like this: vmscan: shrink_slab: gfs2_dump_glock+0x3b0/0x630 [gfs2] \ negative objects to delete nr=-1 This happens as follows: 1) A glock is moved from lru_list to the dispose list and lru_count is decremented. 2) The dispose function calls cond_resched() and drops the lru lock. 3) Another thread takes the lru lock and tries to add the same glock to lru_list, checking if the glock is on an lru list. 4) It is on a list (actually the dispose list) and so it avoids incrementing lru_count. 5) The glock is moved to lru_list. 5) The original thread doesn't dispose it because it has been re-added to the lru list but the lru_count has still decreased by one. Fix by checking if the LRU flag is set on the glock rather than checking if the glock is on some list and rearrange the code so that the LRU flag is added/removed precisely when the glock is added/removed from lru_list. Signed-off-by: Ross Lagerwall Signed-off-by: Andreas Gruenbacher Signed-off-by: Sasha Levin commit d29c277b4fe8ee8a0b7e15eaea6181fd528a7d1d Author: David Sterba Date: Wed May 29 19:25:46 2019 +0200 Revert "btrfs: Honour FITRIM range constraints during free space trim" This reverts commit b9ee627187491547791aacf96d4dd8f4d9afbf1c. There is currently no corresponding patch in master due to additional changes that would be significantly different from plain revert in the respective stable branch. The range argument was not handled correctly and could cause trim to overlap allocated areas or reach beyond the end of the device. The address space that fitrim normally operates on is in logical coordinates, while the discards are done on the physical device extents. This distinction cannot be made with the current ioctl interface and caused the confusion. The bug depends on the layout of block groups and does not always happen. The whole-fs trim (run by default by the fstrim tool) is not affected. Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 79bade500ab07e69f20d853535b8e47c5878bf4d Author: Kristian Evensen Date: Fri May 3 17:40:07 2019 +0200 netfilter: ctnetlink: Resolve conntrack L3-protocol flush regression commit f8e608982022fad035160870f5b06086d3cba54d upstream. Commit 59c08c69c278 ("netfilter: ctnetlink: Support L3 protocol-filter on flush") introduced a user-space regression when flushing connection track entries. Before this commit, the nfgen_family field was not used by the kernel and all entries were removed. Since this commit, nfgen_family is used to filter out entries that should not be removed. One example a broken tool is conntrack. conntrack always sets nfgen_family to AF_INET, so after 59c08c69c278 only IPv4 entries were removed with the -F parameter. Pablo Neira Ayuso suggested using nfgenmsg->version to resolve the regression, and this commit implements his suggestion. nfgenmsg->version is so far set to zero, so it is well-suited to be used as a flag for selecting old or new flush behavior. If version is 0, nfgen_family is ignored and all entries are used. If user-space sets the version to one (or any other value than 0), then the new behavior is used. As version only can have two valid values, I chose not to add a new NFNETLINK_VERSION-constant. Fixes: 59c08c69c278 ("netfilter: ctnetlink: Support L3 protocol-filter on flush") Reported-by: Nicolas Dichtel Suggested-by: Pablo Neira Ayuso Signed-off-by: Kristian Evensen Tested-by: Nicolas Dichtel Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit 36e965ceddf2ac5e1714f457044e56962fc236bf Author: Al Viro Date: Thu Apr 4 21:04:13 2019 -0400 acct_on(): don't mess with freeze protection commit 9419a3191dcb27f24478d288abaab697228d28e6 upstream. What happens there is that we are replacing file->path.mnt of a file we'd just opened with a clone and we need the write count contribution to be transferred from original mount to new one. That's it. We do *NOT* want any kind of freeze protection for the duration of switchover. IOW, we should just use __mnt_{want,drop}_write() for that switchover; no need to bother with mnt_{want,drop}_write() there. Tested-by: Amir Goldstein Reported-by: syzbot+2a73a6ea9507b7112141@syzkaller.appspotmail.com Signed-off-by: Al Viro Signed-off-by: Greg Kroah-Hartman commit af88098ecee704a1258e0e1aa805cd8bb2c88739 Author: YueHaibing Date: Mon Apr 8 11:45:29 2019 +0800 at76c50x-usb: Don't register led_trigger if usb_register_driver failed commit 09ac2694b0475f96be895848687ebcbba97eeecf upstream. Syzkaller report this: [ 1213.468581] BUG: unable to handle kernel paging request at fffffbfff83bf338 [ 1213.469530] #PF error: [normal kernel read fault] [ 1213.469530] PGD 237fe4067 P4D 237fe4067 PUD 237e60067 PMD 1c868b067 PTE 0 [ 1213.473514] Oops: 0000 [#1] SMP KASAN PTI [ 1213.473514] CPU: 0 PID: 6321 Comm: syz-executor.0 Tainted: G C 5.1.0-rc3+ #8 [ 1213.473514] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 1213.473514] RIP: 0010:strcmp+0x31/0xa0 [ 1213.473514] Code: 00 00 00 00 fc ff df 55 53 48 83 ec 08 eb 0a 84 db 48 89 ef 74 5a 4c 89 e6 48 89 f8 48 89 fa 48 8d 6f 01 48 c1 e8 03 83 e2 07 <42> 0f b6 04 28 38 d0 7f 04 84 c0 75 50 48 89 f0 48 89 f2 0f b6 5d [ 1213.473514] RSP: 0018:ffff8881f2b7f950 EFLAGS: 00010246 [ 1213.473514] RAX: 1ffffffff83bf338 RBX: ffff8881ea6f7240 RCX: ffffffff825350c6 [ 1213.473514] RDX: 0000000000000000 RSI: ffffffffc1ee19c0 RDI: ffffffffc1df99c0 [ 1213.473514] RBP: ffffffffc1df99c1 R08: 0000000000000001 R09: 0000000000000004 [ 1213.473514] R10: 0000000000000000 R11: ffff8881de353f00 R12: ffff8881ee727900 [ 1213.473514] R13: dffffc0000000000 R14: 0000000000000001 R15: ffffffffc1eeaaf0 [ 1213.473514] FS: 00007fa66fa01700(0000) GS:ffff8881f7200000(0000) knlGS:0000000000000000 [ 1213.473514] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1213.473514] CR2: fffffbfff83bf338 CR3: 00000001ebb9e005 CR4: 00000000007606f0 [ 1213.473514] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1213.473514] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1213.473514] PKRU: 55555554 [ 1213.473514] Call Trace: [ 1213.473514] led_trigger_register+0x112/0x3f0 [ 1213.473514] led_trigger_register_simple+0x7a/0x110 [ 1213.473514] ? 0xffffffffc1c10000 [ 1213.473514] at76_mod_init+0x77/0x1000 [at76c50x_usb] [ 1213.473514] do_one_initcall+0xbc/0x47d [ 1213.473514] ? perf_trace_initcall_level+0x3a0/0x3a0 [ 1213.473514] ? kasan_unpoison_shadow+0x30/0x40 [ 1213.473514] ? kasan_unpoison_shadow+0x30/0x40 [ 1213.473514] do_init_module+0x1b5/0x547 [ 1213.473514] load_module+0x6405/0x8c10 [ 1213.473514] ? module_frob_arch_sections+0x20/0x20 [ 1213.473514] ? kernel_read_file+0x1e6/0x5d0 [ 1213.473514] ? find_held_lock+0x32/0x1c0 [ 1213.473514] ? cap_capable+0x1ae/0x210 [ 1213.473514] ? __do_sys_finit_module+0x162/0x190 [ 1213.473514] __do_sys_finit_module+0x162/0x190 [ 1213.473514] ? __ia32_sys_init_module+0xa0/0xa0 [ 1213.473514] ? __mutex_unlock_slowpath+0xdc/0x690 [ 1213.473514] ? wait_for_completion+0x370/0x370 [ 1213.473514] ? vfs_write+0x204/0x4a0 [ 1213.473514] ? do_syscall_64+0x18/0x450 [ 1213.473514] do_syscall_64+0x9f/0x450 [ 1213.473514] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1213.473514] RIP: 0033:0x462e99 [ 1213.473514] Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 [ 1213.473514] RSP: 002b:00007fa66fa00c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 1213.473514] RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 [ 1213.473514] RDX: 0000000000000000 RSI: 0000000020000300 RDI: 0000000000000003 [ 1213.473514] RBP: 00007fa66fa00c70 R08: 0000000000000000 R09: 0000000000000000 [ 1213.473514] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fa66fa016bc [ 1213.473514] R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 If usb_register failed, no need to call led_trigger_register_simple. Reported-by: Hulk Robot Fixes: 1264b951463a ("at76c50x-usb: add driver") Signed-off-by: YueHaibing Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman commit e261f600ff89ad00fc83974c2ddd6d06491dd0d0 Author: Linus Lüssing Date: Wed Apr 24 03:19:14 2019 +0200 batman-adv: mcast: fix multicast tt/tvlv worker locking commit a3c7cd0cdf1107f891aff847ad481e34df727055 upstream. Syzbot has reported some issues with the locking assumptions made for the multicast tt/tvlv worker: It was able to trigger the WARN_ON() in batadv_mcast_mla_tt_retract() and batadv_mcast_mla_tt_add(). While hard/not reproduceable for us so far it seems that the delayed_work_pending() we use might not be quite safe from reordering. Therefore this patch adds an explicit, new spinlock to protect the update of the mla_list and flags in bat_priv and then removes the WARN_ON(delayed_work_pending()). Reported-by: syzbot+83f2d54ec6b7e417e13f@syzkaller.appspotmail.com Reported-by: syzbot+050927a651272b145a5d@syzkaller.appspotmail.com Reported-by: syzbot+979ffc89b87309b1b94b@syzkaller.appspotmail.com Reported-by: syzbot+f9f3f388440283da2965@syzkaller.appspotmail.com Fixes: cbebd363b2e9 ("batman-adv: Use own timer for multicast TT and TVLV updates") Signed-off-by: Linus Lüssing Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich Signed-off-by: Greg Kroah-Hartman commit 888103f9ac9067921bc4c0249c7f93b848c66616 Author: Eric Dumazet Date: Mon May 13 09:59:16 2019 -0700 bpf: devmap: fix use-after-free Read in __dev_map_entry_free commit 2baae3545327632167c0180e9ca1d467416f1919 upstream. synchronize_rcu() is fine when the rcu callbacks only need to free memory (kfree_rcu() or direct kfree() call rcu call backs) __dev_map_entry_free() is a bit more complex, so we need to make sure that call queued __dev_map_entry_free() callbacks have completed. sysbot report: BUG: KASAN: use-after-free in dev_map_flush_old kernel/bpf/devmap.c:365 [inline] BUG: KASAN: use-after-free in __dev_map_entry_free+0x2a8/0x300 kernel/bpf/devmap.c:379 Read of size 8 at addr ffff8801b8da38c8 by task ksoftirqd/1/18 CPU: 1 PID: 18 Comm: ksoftirqd/1 Not tainted 4.17.0+ #39 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433 dev_map_flush_old kernel/bpf/devmap.c:365 [inline] __dev_map_entry_free+0x2a8/0x300 kernel/bpf/devmap.c:379 __rcu_reclaim kernel/rcu/rcu.h:178 [inline] rcu_do_batch kernel/rcu/tree.c:2558 [inline] invoke_rcu_callbacks kernel/rcu/tree.c:2818 [inline] __rcu_process_callbacks kernel/rcu/tree.c:2785 [inline] rcu_process_callbacks+0xe9d/0x1760 kernel/rcu/tree.c:2802 __do_softirq+0x2e0/0xaf5 kernel/softirq.c:284 run_ksoftirqd+0x86/0x100 kernel/softirq.c:645 smpboot_thread_fn+0x417/0x870 kernel/smpboot.c:164 kthread+0x345/0x410 kernel/kthread.c:240 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412 Allocated by task 6675: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553 kmem_cache_alloc_trace+0x152/0x780 mm/slab.c:3620 kmalloc include/linux/slab.h:513 [inline] kzalloc include/linux/slab.h:706 [inline] dev_map_alloc+0x208/0x7f0 kernel/bpf/devmap.c:102 find_and_alloc_map kernel/bpf/syscall.c:129 [inline] map_create+0x393/0x1010 kernel/bpf/syscall.c:453 __do_sys_bpf kernel/bpf/syscall.c:2351 [inline] __se_sys_bpf kernel/bpf/syscall.c:2328 [inline] __x64_sys_bpf+0x303/0x510 kernel/bpf/syscall.c:2328 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 26: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528 __cache_free mm/slab.c:3498 [inline] kfree+0xd9/0x260 mm/slab.c:3813 dev_map_free+0x4fa/0x670 kernel/bpf/devmap.c:191 bpf_map_free_deferred+0xba/0xf0 kernel/bpf/syscall.c:262 process_one_work+0xc64/0x1b70 kernel/workqueue.c:2153 worker_thread+0x181/0x13a0 kernel/workqueue.c:2296 kthread+0x345/0x410 kernel/kthread.c:240 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412 The buggy address belongs to the object at ffff8801b8da37c0 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 264 bytes inside of 512-byte region [ffff8801b8da37c0, ffff8801b8da39c0) The buggy address belongs to the page: page:ffffea0006e368c0 count:1 mapcount:0 mapping:ffff8801da800940 index:0xffff8801b8da3540 flags: 0x2fffc0000000100(slab) raw: 02fffc0000000100 ffffea0007217b88 ffffea0006e30cc8 ffff8801da800940 raw: ffff8801b8da3540 ffff8801b8da3040 0000000100000004 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801b8da3780: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8801b8da3800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb > ffff8801b8da3880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8801b8da3900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8801b8da3980: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc Fixes: 546ac1ffb70d ("bpf: add devmap, a map for storing net device references") Signed-off-by: Eric Dumazet Reported-by: syzbot+457d3e2ffbcf31aee5c0@syzkaller.appspotmail.com Acked-by: Toke Høiland-Jørgensen Acked-by: Jesper Dangaard Brouer Signed-off-by: Daniel Borkmann Signed-off-by: Greg Kroah-Hartman commit 8a456be68b18137a7cda0e85c4088e3b6883f32f Author: YueHaibing Date: Wed Mar 6 19:56:58 2019 +0800 ssb: Fix possible NULL pointer dereference in ssb_host_pcmcia_exit commit b2c01aab9646ed8ffb7c549afe55d5349c482425 upstream. Syzkaller report this: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI CPU: 0 PID: 4492 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:sysfs_remove_file_ns+0x27/0x70 fs/sysfs/file.c:468 Code: 00 00 00 41 54 55 48 89 fd 53 49 89 d4 48 89 f3 e8 ee 76 9c ff 48 8d 7d 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 75 2d 48 89 da 48 b8 00 00 00 00 00 fc ff df 48 8b 6d RSP: 0018:ffff8881e9d9fc00 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: ffffffff900367e0 RCX: ffffffff81a95952 RDX: 0000000000000006 RSI: ffffc90001405000 RDI: 0000000000000030 RBP: 0000000000000000 R08: fffffbfff1fa22ed R09: fffffbfff1fa22ed R10: 0000000000000001 R11: fffffbfff1fa22ec R12: 0000000000000000 R13: ffffffffc1abdac0 R14: 1ffff1103d3b3f8b R15: 0000000000000000 FS: 00007fe409dc1700(0000) GS:ffff8881f1200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2d721000 CR3: 00000001e98b6005 CR4: 00000000007606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: sysfs_remove_file include/linux/sysfs.h:519 [inline] driver_remove_file+0x40/0x50 drivers/base/driver.c:122 pcmcia_remove_newid_file drivers/pcmcia/ds.c:163 [inline] pcmcia_unregister_driver+0x7d/0x2b0 drivers/pcmcia/ds.c:209 ssb_modexit+0xa/0x1b [ssb] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe409dc0c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200000c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe409dc16bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Modules linked in: ssb(-) 3c59x nvme_core macvlan tap pata_hpt3x3 rt2x00pci null_blk tsc40 pm_notifier_error_inject notifier_error_inject mdio cdc_wdm nf_reject_ipv4 ath9k_common ath9k_hw ath pppox ppp_generic slhc ehci_platform wl12xx wlcore tps6507x_ts ioc4 nf_synproxy_core ide_gd_mod ax25 can_dev iwlwifi can_raw atm tm2_touchkey can_gw can sundance adp5588_keys rt2800mmio rt2800lib rt2x00mmio rt2x00lib eeprom_93cx6 pn533 lru_cache elants_i2c ip_set nfnetlink gameport tipc hampshire nhc_ipv6 nhc_hop nhc_udp nhc_fragment nhc_routing nhc_mobility nhc_dest 6lowpan silead brcmutil nfc mt76_usb mt76 mac80211 iptable_security iptable_raw iptable_mangle iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_gre sit hsr veth vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon vcan bridge stp llc ip6_gre ip6_tunnel tunnel6 tun joydev mousedev serio_raw ide_pci_generic piix floppy ide_core sch_fq_codel ip_tables x_tables ipv6 [last unloaded: 3c59x] Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace 3913cbf8011e1c05 ]--- In ssb_modinit, it does not fail SSB init when ssb_host_pcmcia_init failed, however in ssb_modexit, ssb_host_pcmcia_exit calls pcmcia_unregister_driver unconditionally, which may tigger a NULL pointer dereference issue as above. Reported-by: Hulk Robot Fixes: 399500da18f7 ("ssb: pick PCMCIA host code support from b43 driver") Signed-off-by: YueHaibing Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman commit 833368fcdb4786d14c83cbac2e8c7d679f12e6d3 Author: Alexander Potapenko Date: Thu Apr 4 10:56:46 2019 -0400 media: vivid: use vfree() instead of kfree() for dev->bitmap_cap commit dad7e270ba712ba1c99cd2d91018af6044447a06 upstream. syzkaller reported crashes on kfree() called from vivid_vid_cap_s_selection(). This looks like a simple typo, as dev->bitmap_cap is allocated with vzalloc() throughout the file. Fixes: ef834f7836ec0 ("[media] vivid: add the video capture and output parts") Signed-off-by: Alexander Potapenko Reported-by: Syzbot Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman commit ebcbdbbe91a8e7fb5ab7be053932c2834b8176a7 Author: Hans Verkuil Date: Mon Nov 19 06:09:00 2018 -0500 media: vb2: add waiting_in_dqbuf flag commit d65842f7126aa1a87fb44b7c9980c12630ed4f33 upstream. Calling VIDIOC_DQBUF can release the core serialization lock pointed to by vb2_queue->lock if it has to wait for a new buffer to arrive. However, if userspace dup()ped the video device filehandle, then it is possible to read or call DQBUF from two filehandles at the same time. It is also possible to call REQBUFS from one filehandle while the other is waiting for a buffer. This will remove all the buffers and reallocate new ones. Removing all the buffers isn't the problem here (that's already handled correctly by DQBUF), but the reallocating part is: DQBUF isn't aware that the buffers have changed. This is fixed by setting a flag whenever the lock is released while waiting for a buffer to arrive. And checking the flag where needed so we can return -EBUSY. Signed-off-by: Hans Verkuil Reported-by: Syzbot Reviewed-by: Tomasz Figa Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman commit e454727734da77e5cc510ddaf2bf36736bbfc9a0 Author: YueHaibing Date: Tue Mar 5 00:40:26 2019 -0500 media: serial_ir: Fix use-after-free in serial_ir_init_module commit 56cd26b618855c9af48c8301aa6754ced8dd0beb upstream. Syzkaller report this: BUG: KASAN: use-after-free in sysfs_remove_file_ns+0x5f/0x70 fs/sysfs/file.c:468 Read of size 8 at addr ffff8881dc7ae030 by task syz-executor.0/6249 CPU: 1 PID: 6249 Comm: syz-executor.0 Not tainted 5.0.0-rc8+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 ? 0xffffffffc1728000 sysfs_remove_file_ns+0x5f/0x70 fs/sysfs/file.c:468 sysfs_remove_file include/linux/sysfs.h:519 [inline] driver_remove_file+0x40/0x50 drivers/base/driver.c:122 remove_bind_files drivers/base/bus.c:585 [inline] bus_remove_driver+0x186/0x220 drivers/base/bus.c:725 driver_unregister+0x6c/0xa0 drivers/base/driver.c:197 serial_ir_init_module+0x169/0x1000 [serial_ir] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f9450132c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007f9450132c70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f94501336bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Allocated by task 6249: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:495 kmalloc include/linux/slab.h:545 [inline] kzalloc include/linux/slab.h:740 [inline] bus_add_driver+0xc0/0x610 drivers/base/bus.c:651 driver_register+0x1bb/0x3f0 drivers/base/driver.c:170 serial_ir_init_module+0xe8/0x1000 [serial_ir] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 6249: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:457 slab_free_hook mm/slub.c:1430 [inline] slab_free_freelist_hook mm/slub.c:1457 [inline] slab_free mm/slub.c:3005 [inline] kfree+0xe1/0x270 mm/slub.c:3957 kobject_cleanup lib/kobject.c:662 [inline] kobject_release lib/kobject.c:691 [inline] kref_put include/linux/kref.h:67 [inline] kobject_put+0x146/0x240 lib/kobject.c:708 bus_remove_driver+0x10e/0x220 drivers/base/bus.c:732 driver_unregister+0x6c/0xa0 drivers/base/driver.c:197 serial_ir_init_module+0x14c/0x1000 [serial_ir] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881dc7ae000 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 48 bytes inside of 256-byte region [ffff8881dc7ae000, ffff8881dc7ae100) The buggy address belongs to the page: page:ffffea000771eb80 count:1 mapcount:0 mapping:ffff8881f6c02e00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 ffffea0007d14800 0000000400000002 ffff8881f6c02e00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881dc7adf00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8881dc7adf80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff8881dc7ae000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881dc7ae080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881dc7ae100: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00 There are already cleanup handlings in serial_ir_init error path, no need to call serial_ir_exit do it again in serial_ir_init_module, otherwise will trigger a use-after-free issue. Fixes: fa5dc29c1fcc ("[media] lirc_serial: move out of staging and rename to serial_ir") Reported-by: Hulk Robot Signed-off-by: YueHaibing Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman commit 447ac65b9cd89ea2ee2937ec2b77fbb35a12ef46 Author: YueHaibing Date: Wed Mar 6 07:45:08 2019 -0500 media: cpia2: Fix use-after-free in cpia2_exit commit dea37a97265588da604c6ba80160a287b72c7bfd upstream. Syzkaller report this: BUG: KASAN: use-after-free in sysfs_remove_file_ns+0x5f/0x70 fs/sysfs/file.c:468 Read of size 8 at addr ffff8881f59a6b70 by task syz-executor.0/8363 CPU: 0 PID: 8363 Comm: syz-executor.0 Not tainted 5.0.0-rc8+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 sysfs_remove_file_ns+0x5f/0x70 fs/sysfs/file.c:468 sysfs_remove_file include/linux/sysfs.h:519 [inline] driver_remove_file+0x40/0x50 drivers/base/driver.c:122 usb_remove_newid_files drivers/usb/core/driver.c:212 [inline] usb_deregister+0x12a/0x3b0 drivers/usb/core/driver.c:1005 cpia2_exit+0xa/0x16 [cpia2] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f86f3754c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000300 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f86f37556bc R13: 00000000004bcca9 R14: 00000000006f6b48 R15: 00000000ffffffff Allocated by task 8363: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:495 kmalloc include/linux/slab.h:545 [inline] kzalloc include/linux/slab.h:740 [inline] bus_add_driver+0xc0/0x610 drivers/base/bus.c:651 driver_register+0x1bb/0x3f0 drivers/base/driver.c:170 usb_register_driver+0x267/0x520 drivers/usb/core/driver.c:965 0xffffffffc1b4817c do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 8363: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:457 slab_free_hook mm/slub.c:1430 [inline] slab_free_freelist_hook mm/slub.c:1457 [inline] slab_free mm/slub.c:3005 [inline] kfree+0xe1/0x270 mm/slub.c:3957 kobject_cleanup lib/kobject.c:662 [inline] kobject_release lib/kobject.c:691 [inline] kref_put include/linux/kref.h:67 [inline] kobject_put+0x146/0x240 lib/kobject.c:708 bus_remove_driver+0x10e/0x220 drivers/base/bus.c:732 driver_unregister+0x6c/0xa0 drivers/base/driver.c:197 usb_register_driver+0x341/0x520 drivers/usb/core/driver.c:980 0xffffffffc1b4817c do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f59a6b40 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 48 bytes inside of 256-byte region [ffff8881f59a6b40, ffff8881f59a6c40) The buggy address belongs to the page: page:ffffea0007d66980 count:1 mapcount:0 mapping:ffff8881f6c02e00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6c02e00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f59a6a00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8881f59a6a80: 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc >ffff8881f59a6b00: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ^ ffff8881f59a6b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881f59a6c00: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc cpia2_init does not check return value of cpia2_init, if it failed in usb_register_driver, there is already cleanup using driver_unregister. No need call cpia2_usb_cleanup on module exit. Reported-by: Hulk Robot Signed-off-by: YueHaibing Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman commit ebe2c55c38f01aa20a152eefc65bd1c7c2767701 Author: Jiufei Xue Date: Thu Apr 11 19:25:12 2019 +0200 fbdev: fix WARNING in __alloc_pages_nodemask bug commit 8c40292be9169a9cbe19aadd1a6fc60cbd1af82f upstream. Syzkaller hit 'WARNING in __alloc_pages_nodemask' bug. WARNING: CPU: 1 PID: 1473 at mm/page_alloc.c:4377 __alloc_pages_nodemask+0x4da/0x2130 Kernel panic - not syncing: panic_on_warn set ... Call Trace: alloc_pages_current+0xb1/0x1e0 kmalloc_order+0x1f/0x60 kmalloc_order_trace+0x1d/0x120 fb_alloc_cmap_gfp+0x85/0x2b0 fb_set_user_cmap+0xff/0x370 do_fb_ioctl+0x949/0xa20 fb_ioctl+0xdd/0x120 do_vfs_ioctl+0x186/0x1070 ksys_ioctl+0x89/0xa0 __x64_sys_ioctl+0x74/0xb0 do_syscall_64+0xc8/0x550 entry_SYSCALL_64_after_hwframe+0x49/0xbe This is a warning about order >= MAX_ORDER and the order is from userspace ioctl. Add flag __NOWARN to silence this warning. Signed-off-by: Jiufei Xue Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Greg Kroah-Hartman commit 9d7c01c2f5d1ff060e4a3968393e87288918ec8f Author: Amir Goldstein Date: Thu Mar 28 17:38:29 2019 +0200 ovl: relax WARN_ON() for overlapping layers use case commit acf3062a7e1ccf67c6f7e7c28671a6708fde63b0 upstream. This nasty little syzbot repro: https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000 Creates overlay mounts where the same directory is both in upper and lower layers. Simplified example: mkdir foo work mount -t overlay none foo -o"lowerdir=.,upperdir=foo,workdir=work" The repro runs several threads in parallel that attempt to chdir into foo and attempt to symlink/rename/exec/mkdir the file bar. The repro hits a WARN_ON() I placed in ovl_instantiate(), which suggests that an overlay inode already exists in cache and is hashed by the pointer of the real upper dentry that ovl_create_real() has just created. At the point of the WARN_ON(), for overlay dir inode lock is held and upper dir inode lock, so at first, I did not see how this was possible. On a closer look, I see that after ovl_create_real(), because of the overlapping upper and lower layers, a lookup by another thread can find the file foo/bar that was just created in upper layer, at overlay path foo/foo/bar and hash the an overlay inode with the new real dentry as lower dentry. This is possible because the overlay directory foo/foo is not locked and the upper dentry foo/bar is in dcache, so ovl_lookup() can find it without taking upper dir inode shared lock. Overlapping layers is considered a wrong setup which would result in unexpected behavior, but it shouldn't crash the kernel and it shouldn't trigger WARN_ON() either, so relax this WARN_ON() and leave a pr_warn() instead to cover all cases of failure to get an overlay inode. The error returned from failure to insert new inode to cache with inode_insert5() was changed to -EEXIST, to distinguish from the error -ENOMEM returned on failure to get/allocate inode with iget5_locked(). Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com Fixes: 01b39dcc9568 ("ovl: use inode_insert5() to hash a newly...") Signed-off-by: Amir Goldstein Signed-off-by: Miklos Szeredi Signed-off-by: Greg Kroah-Hartman commit 2904de1dea70671fc4cbdac796d60bd35e8aa817 Author: Josef Bacik Date: Wed Jan 16 11:00:57 2019 -0500 btrfs: honor path->skip_locking in backref code commit 38e3eebff643db725633657d1d87a3be019d1018 upstream. Qgroups will do the old roots lookup at delayed ref time, which could be while walking down the extent root while running a delayed ref. This should be fine, except we specifically lock eb's in the backref walking code irrespective of path->skip_locking, which deadlocks the system. Fix up the backref code to honor path->skip_locking, nobody will be modifying the commit_root when we're searching so it's completely safe to do. This happens since fb235dc06fac ("btrfs: qgroup: Move half of the qgroup accounting time out of commit trans"), kernel may lockup with quota enabled. There is one backref trace triggered by snapshot dropping along with write operation in the source subvolume. The example can be reliably reproduced: btrfs-cleaner D 0 4062 2 0x80000000 Call Trace: schedule+0x32/0x90 btrfs_tree_read_lock+0x93/0x130 [btrfs] find_parent_nodes+0x29b/0x1170 [btrfs] btrfs_find_all_roots_safe+0xa8/0x120 [btrfs] btrfs_find_all_roots+0x57/0x70 [btrfs] btrfs_qgroup_trace_extent_post+0x37/0x70 [btrfs] btrfs_qgroup_trace_leaf_items+0x10b/0x140 [btrfs] btrfs_qgroup_trace_subtree+0xc8/0xe0 [btrfs] do_walk_down+0x541/0x5e3 [btrfs] walk_down_tree+0xab/0xe7 [btrfs] btrfs_drop_snapshot+0x356/0x71a [btrfs] btrfs_clean_one_deleted_snapshot+0xb8/0xf0 [btrfs] cleaner_kthread+0x12b/0x160 [btrfs] kthread+0x112/0x130 ret_from_fork+0x27/0x50 When dropping snapshots with qgroup enabled, we will trigger backref walk. However such backref walk at that timing is pretty dangerous, as if one of the parent nodes get WRITE locked by other thread, we could cause a dead lock. For example: FS 260 FS 261 (Dropped) node A node B / \ / \ node C node D node E / \ / \ / \ leaf F|leaf G|leaf H|leaf I|leaf J|leaf K The lock sequence would be: Thread A (cleaner) | Thread B (other writer) ----------------------------------------------------------------------- write_lock(B) | write_lock(D) | ^^^ called by walk_down_tree() | | write_lock(A) | write_lock(D) << Stall read_lock(H) << for backref walk | read_lock(D) << lock owner is | the same thread A | so read lock is OK | read_lock(A) << Stall | So thread A hold write lock D, and needs read lock A to unlock. While thread B holds write lock A, while needs lock D to unlock. This will cause a deadlock. This is not only limited to snapshot dropping case. As the backref walk, even only happens on commit trees, is breaking the normal top-down locking order, makes it deadlock prone. Fixes: fb235dc06fac ("btrfs: qgroup: Move half of the qgroup accounting time out of commit trans") CC: stable@vger.kernel.org # 4.14+ Reported-and-tested-by: David Sterba Reported-by: Filipe Manana Reviewed-by: Qu Wenruo Signed-off-by: Josef Bacik Reviewed-by: Filipe Manana [ rebase to latest branch and fix lock assert bug in btrfs/007 ] [ solve conflicts and backport to linux-5.0.y ] Signed-off-by: Qu Wenruo [ copy logs and deadlock analysis from Qu's patch ] Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit e4c2027048b048079fb1b306fe365921a14a055f Author: Will Deacon Date: Mon Apr 29 13:03:57 2019 +0100 arm64: errata: Add workaround for Cortex-A76 erratum #1463225 commit 969f5ea627570e91c9d54403287ee3ed657f58fe upstream. Revisions of the Cortex-A76 CPU prior to r4p0 are affected by an erratum that can prevent interrupts from being taken when single-stepping. This patch implements a software workaround to prevent userspace from effectively being able to disable interrupts. Cc: Cc: Marc Zyngier Cc: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman commit 72be314718b0e0e3a4d3f7c02aca65bc12aada95 Author: Arend van Spriel Date: Thu Feb 14 13:43:48 2019 +0100 brcmfmac: add subtype check for event handling in data path commit a4176ec356c73a46c07c181c6d04039fafa34a9f upstream. For USB there is no separate channel being used to pass events from firmware to the host driver and as such are passed over the data path. In order to detect mock event messages an additional check is needed on event subtype. This check is added conditionally using unlikely() keyword. Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: Kalle Valo Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman commit c40be0dd9af9ec1289527761b35e940f757581ca Author: Arend van Spriel Date: Thu Feb 14 13:43:47 2019 +0100 brcmfmac: assure SSID length from firmware is limited commit 1b5e2423164b3670e8bc9174e4762d297990deff upstream. The SSID length as received from firmware should not exceed IEEE80211_MAX_SSID_LEN as that would result in heap overflow. Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: Kalle Valo Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman commit f325bfb738da5fbddb9c9bc70cf13a00ef2a74af Author: Ronnie Sahlberg Date: Wed May 1 12:03:41 2019 +1000 cifs: fix credits leak for SMB1 oplock breaks commit d69cb728e70c40268762182a62f5d5d6fa51c5b2 upstream. For SMB1 oplock breaks we would grab one credit while sending the PDU but we would never relese the credit back since we will never receive a response to this from the server. Eventuallt this would lead to a hang once all credits are leaked. Fix this by defining a new flag CIFS_NO_SRV_RSP which indicates that there is no server response to this command and thus we need to add any credits back immediately after sending the PDU. CC: Stable #v5.0+ Signed-off-by: Ronnie Sahlberg Reviewed-by: Pavel Shilovsky Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit e932248f0e61c220772ffe36e7de226daad20986 Author: Shile Zhang Date: Mon Apr 1 17:47:00 2019 +0200 fbdev: fix divide error in fb_var_to_videomode commit cf84807f6dd0be5214378e66460cfc9187f532f9 upstream. To fix following divide-by-zero error found by Syzkaller: divide error: 0000 [#1] SMP PTI CPU: 7 PID: 8447 Comm: test Kdump: loaded Not tainted 4.19.24-8.al7.x86_64 #1 Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014 RIP: 0010:fb_var_to_videomode+0xae/0xc0 Code: 04 44 03 46 78 03 4e 7c 44 03 46 68 03 4e 70 89 ce d1 ee 69 c0 e8 03 00 00 f6 c2 01 0f 45 ce 83 e2 02 8d 34 09 0f 45 ce 31 d2 <41> f7 f0 31 d2 f7 f1 89 47 08 f3 c3 66 0f 1f 44 00 00 0f 1f 44 00 RSP: 0018:ffffb7e189347bf0 EFLAGS: 00010246 RAX: 00000000e1692410 RBX: ffffb7e189347d60 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb7e189347c10 RBP: ffff99972a091c00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000100 R13: 0000000000010000 R14: 00007ffd66baf6d0 R15: 0000000000000000 FS: 00007f2054d11740(0000) GS:ffff99972fbc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f205481fd20 CR3: 00000004288a0001 CR4: 00000000001606a0 Call Trace: fb_set_var+0x257/0x390 ? lookup_fast+0xbb/0x2b0 ? fb_open+0xc0/0x140 ? chrdev_open+0xa6/0x1a0 do_fb_ioctl+0x445/0x5a0 do_vfs_ioctl+0x92/0x5f0 ? __alloc_fd+0x3d/0x160 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x5b/0x190 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f20548258d7 Code: 44 00 00 48 8b 05 b9 15 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 89 15 2d 00 f7 d8 64 89 01 48 It can be triggered easily with following test code: #include #include #include int main(void) { struct fb_var_screeninfo var = {.activate = 0x100, .pixclock = 60}; int fd = open("/dev/fb0", O_RDWR); if (fd < 0) return 1; if (ioctl(fd, FBIOPUT_VSCREENINFO, &var)) return 1; return 0; } Signed-off-by: Shile Zhang Cc: Fredrik Noring Cc: Daniel Vetter Reviewed-by: Mukesh Ojha Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Greg Kroah-Hartman commit d4665e188578201b694801b9a0c32052ad6529ec Author: Tobin C. Harding Date: Mon May 13 13:39:12 2019 +1000 btrfs: sysfs: don't leak memory when failing add fsid commit e32773357d5cc271b1d23550b3ed026eb5c2a468 upstream. A failed call to kobject_init_and_add() must be followed by a call to kobject_put(). Currently in the error path when adding fs_devices we are missing this call. This could be fixed by calling btrfs_sysfs_remove_fsid() if btrfs_sysfs_add_fsid() returns an error or by adding a call to kobject_put() directly in btrfs_sysfs_add_fsid(). Here we choose the second option because it prevents the slightly unusual error path handling requirements of kobject from leaking out into btrfs functions. Add a call to kobject_put() in the error path of kobject_add_and_init(). This causes the release method to be called if kobject_init_and_add() fails. open_tree() is the function that calls btrfs_sysfs_add_fsid() and the error code in this function is already written with the assumption that the release method is called during the error path of open_tree() (as seen by the call to btrfs_sysfs_remove_fsid() under the fail_fsdev_sysfs label). Cc: stable@vger.kernel.org # v4.4+ Reviewed-by: Greg Kroah-Hartman Signed-off-by: Tobin C. Harding Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit b17907adfd21642d02320771a761ab26b99e8504 Author: Tobin C. Harding Date: Mon May 13 13:39:11 2019 +1000 btrfs: sysfs: Fix error path kobject memory leak commit 450ff8348808a89cc27436771aa05c2b90c0eef1 upstream. If a call to kobject_init_and_add() fails we must call kobject_put() otherwise we leak memory. Calling kobject_put() when kobject_init_and_add() fails drops the refcount back to 0 and calls the ktype release method (which in turn calls the percpu destroy and kfree). Add call to kobject_put() in the error path of call to kobject_init_and_add(). Cc: stable@vger.kernel.org # v4.4+ Reviewed-by: Greg Kroah-Hartman Signed-off-by: Tobin C. Harding Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 17faae8e22c66116c7d72cf4123b53ed3e3c574c Author: Filipe Manana Date: Mon May 6 16:44:02 2019 +0100 Btrfs: fix race between ranged fsync and writeback of adjacent ranges commit 0c713cbab6200b0ab6473b50435e450a6e1de85d upstream. When we do a full fsync (the bit BTRFS_INODE_NEEDS_FULL_SYNC is set in the inode) that happens to be ranged, which happens during a msync() or writes for files opened with O_SYNC for example, we can end up with a corrupt log, due to different file extent items representing ranges that overlap with each other, or hit some assertion failures. When doing a ranged fsync we only flush delalloc and wait for ordered exents within that range. If while we are logging items from our inode ordered extents for adjacent ranges complete, we end up in a race that can make us insert the file extent items that overlap with others we logged previously and the assertion failures. For example, if tree-log.c:copy_items() receives a leaf that has the following file extents items, all with a length of 4K and therefore there is an implicit hole in the range 68K to 72K - 1: (257 EXTENT_ITEM 64K), (257 EXTENT_ITEM 72K), (257 EXTENT_ITEM 76K), ... It copies them to the log tree. However due to the need to detect implicit holes, it may release the path, in order to look at the previous leaf to detect an implicit hole, and then later it will search again in the tree for the first file extent item key, with the goal of locking again the leaf (which might have changed due to concurrent changes to other inodes). However when it locks again the leaf containing the first key, the key corresponding to the extent at offset 72K may not be there anymore since there is an ordered extent for that range that is finishing (that is, somewhere in the middle of btrfs_finish_ordered_io()), and it just removed the file extent item but has not yet replaced it with a new file extent item, so the part of copy_items() that does hole detection will decide that there is a hole in the range starting from 68K to 76K - 1, and therefore insert a file extent item to represent that hole, having a key offset of 68K. After that we now have a log tree with 2 different extent items that have overlapping ranges: 1) The file extent item copied before copy_items() released the path, which has a key offset of 72K and a length of 4K, representing the file range 72K to 76K - 1. 2) And a file extent item representing a hole that has a key offset of 68K and a length of 8K, representing the range 68K to 76K - 1. This item was inserted after releasing the path, and overlaps with the extent item inserted before. The overlapping extent items can cause all sorts of unpredictable and incorrect behaviour, either when replayed or if a fast (non full) fsync happens later, which can trigger a BUG_ON() when calling btrfs_set_item_key_safe() through __btrfs_drop_extents(), producing a trace like the following: [61666.783269] ------------[ cut here ]------------ [61666.783943] kernel BUG at fs/btrfs/ctree.c:3182! [61666.784644] invalid opcode: 0000 [#1] PREEMPT SMP (...) [61666.786253] task: ffff880117b88c40 task.stack: ffffc90008168000 [61666.786253] RIP: 0010:btrfs_set_item_key_safe+0x7c/0xd2 [btrfs] [61666.786253] RSP: 0018:ffffc9000816b958 EFLAGS: 00010246 [61666.786253] RAX: 0000000000000000 RBX: 000000000000000f RCX: 0000000000030000 [61666.786253] RDX: 0000000000000000 RSI: ffffc9000816ba4f RDI: ffffc9000816b937 [61666.786253] RBP: ffffc9000816b998 R08: ffff88011dae2428 R09: 0000000000001000 [61666.786253] R10: 0000160000000000 R11: 6db6db6db6db6db7 R12: ffff88011dae2418 [61666.786253] R13: ffffc9000816ba4f R14: ffff8801e10c4118 R15: ffff8801e715c000 [61666.786253] FS: 00007f6060a18700(0000) GS:ffff88023f5c0000(0000) knlGS:0000000000000000 [61666.786253] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [61666.786253] CR2: 00007f6060a28000 CR3: 0000000213e69000 CR4: 00000000000006e0 [61666.786253] Call Trace: [61666.786253] __btrfs_drop_extents+0x5e3/0xaad [btrfs] [61666.786253] ? time_hardirqs_on+0x9/0x14 [61666.786253] btrfs_log_changed_extents+0x294/0x4e0 [btrfs] [61666.786253] ? release_extent_buffer+0x38/0xb4 [btrfs] [61666.786253] btrfs_log_inode+0xb6e/0xcdc [btrfs] [61666.786253] ? lock_acquire+0x131/0x1c5 [61666.786253] ? btrfs_log_inode_parent+0xee/0x659 [btrfs] [61666.786253] ? arch_local_irq_save+0x9/0xc [61666.786253] ? btrfs_log_inode_parent+0x1f5/0x659 [btrfs] [61666.786253] btrfs_log_inode_parent+0x223/0x659 [btrfs] [61666.786253] ? arch_local_irq_save+0x9/0xc [61666.786253] ? lockref_get_not_zero+0x2c/0x34 [61666.786253] ? rcu_read_unlock+0x3e/0x5d [61666.786253] btrfs_log_dentry_safe+0x60/0x7b [btrfs] [61666.786253] btrfs_sync_file+0x317/0x42c [btrfs] [61666.786253] vfs_fsync_range+0x8c/0x9e [61666.786253] SyS_msync+0x13c/0x1c9 [61666.786253] entry_SYSCALL_64_fastpath+0x18/0xad A sample of a corrupt log tree leaf with overlapping extents I got from running btrfs/072: item 14 key (295 108 200704) itemoff 2599 itemsize 53 extent data disk bytenr 0 nr 0 extent data offset 0 nr 458752 ram 458752 item 15 key (295 108 659456) itemoff 2546 itemsize 53 extent data disk bytenr 4343541760 nr 770048 extent data offset 606208 nr 163840 ram 770048 item 16 key (295 108 663552) itemoff 2493 itemsize 53 extent data disk bytenr 4343541760 nr 770048 extent data offset 610304 nr 155648 ram 770048 item 17 key (295 108 819200) itemoff 2440 itemsize 53 extent data disk bytenr 4334788608 nr 4096 extent data offset 0 nr 4096 ram 4096 The file extent item at offset 659456 (item 15) ends at offset 823296 (659456 + 163840) while the next file extent item (item 16) starts at offset 663552. Another different problem that the race can trigger is a failure in the assertions at tree-log.c:copy_items(), which expect that the first file extent item key we found before releasing the path exists after we have released path and that the last key we found before releasing the path also exists after releasing the path: $ cat -n fs/btrfs/tree-log.c 4080 if (need_find_last_extent) { 4081 /* btrfs_prev_leaf could return 1 without releasing the path */ 4082 btrfs_release_path(src_path); 4083 ret = btrfs_search_slot(NULL, inode->root, &first_key, 4084 src_path, 0, 0); 4085 if (ret < 0) 4086 return ret; 4087 ASSERT(ret == 0); (...) 4103 if (i >= btrfs_header_nritems(src_path->nodes[0])) { 4104 ret = btrfs_next_leaf(inode->root, src_path); 4105 if (ret < 0) 4106 return ret; 4107 ASSERT(ret == 0); 4108 src = src_path->nodes[0]; 4109 i = 0; 4110 need_find_last_extent = true; 4111 } (...) The second assertion implicitly expects that the last key before the path release still exists, because the surrounding while loop only stops after we have found that key. When this assertion fails it produces a stack like this: [139590.037075] assertion failed: ret == 0, file: fs/btrfs/tree-log.c, line: 4107 [139590.037406] ------------[ cut here ]------------ [139590.037707] kernel BUG at fs/btrfs/ctree.h:3546! [139590.038034] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI [139590.038340] CPU: 1 PID: 31841 Comm: fsstress Tainted: G W 5.0.0-btrfs-next-46 #1 (...) [139590.039354] RIP: 0010:assfail.constprop.24+0x18/0x1a [btrfs] (...) [139590.040397] RSP: 0018:ffffa27f48f2b9b0 EFLAGS: 00010282 [139590.040730] RAX: 0000000000000041 RBX: ffff897c635d92c8 RCX: 0000000000000000 [139590.041105] RDX: 0000000000000000 RSI: ffff897d36a96868 RDI: ffff897d36a96868 [139590.041470] RBP: ffff897d1b9a0708 R08: 0000000000000000 R09: 0000000000000000 [139590.041815] R10: 0000000000000008 R11: 0000000000000000 R12: 0000000000000013 [139590.042159] R13: 0000000000000227 R14: ffff897cffcbba88 R15: 0000000000000001 [139590.042501] FS: 00007f2efc8dee80(0000) GS:ffff897d36a80000(0000) knlGS:0000000000000000 [139590.042847] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [139590.043199] CR2: 00007f8c064935e0 CR3: 0000000232252002 CR4: 00000000003606e0 [139590.043547] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [139590.043899] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [139590.044250] Call Trace: [139590.044631] copy_items+0xa3f/0x1000 [btrfs] [139590.045009] ? generic_bin_search.constprop.32+0x61/0x200 [btrfs] [139590.045396] btrfs_log_inode+0x7b3/0xd70 [btrfs] [139590.045773] btrfs_log_inode_parent+0x2b3/0xce0 [btrfs] [139590.046143] ? do_raw_spin_unlock+0x49/0xc0 [139590.046510] btrfs_log_dentry_safe+0x4a/0x70 [btrfs] [139590.046872] btrfs_sync_file+0x3b6/0x440 [btrfs] [139590.047243] btrfs_file_write_iter+0x45b/0x5c0 [btrfs] [139590.047592] __vfs_write+0x129/0x1c0 [139590.047932] vfs_write+0xc2/0x1b0 [139590.048270] ksys_write+0x55/0xc0 [139590.048608] do_syscall_64+0x60/0x1b0 [139590.048946] entry_SYSCALL_64_after_hwframe+0x49/0xbe [139590.049287] RIP: 0033:0x7f2efc4be190 (...) [139590.050342] RSP: 002b:00007ffe743243a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [139590.050701] RAX: ffffffffffffffda RBX: 0000000000008d58 RCX: 00007f2efc4be190 [139590.051067] RDX: 0000000000008d58 RSI: 00005567eca0f370 RDI: 0000000000000003 [139590.051459] RBP: 0000000000000024 R08: 0000000000000003 R09: 0000000000008d60 [139590.051863] R10: 0000000000000078 R11: 0000000000000246 R12: 0000000000000003 [139590.052252] R13: 00000000003d3507 R14: 00005567eca0f370 R15: 0000000000000000 (...) [139590.055128] ---[ end trace 193f35d0215cdeeb ]--- So fix this race between a full ranged fsync and writeback of adjacent ranges by flushing all delalloc and waiting for all ordered extents to complete before logging the inode. This is the simplest way to solve the problem because currently the full fsync path does not deal with ranges at all (it assumes a full range from 0 to LLONG_MAX) and it always needs to look at adjacent ranges for hole detection. For use cases of ranged fsyncs this can make a few fsyncs slower but on the other hand it can make some following fsyncs to other ranges do less work or no need to do anything at all. A full fsync is rare anyway and happens only once after loading/creating an inode and once after less common operations such as a shrinking truncate. This is an issue that exists for a long time, and was often triggered by generic/127, because it does mmap'ed writes and msync (which triggers a ranged fsync). Adding support for the tree checker to detect overlapping extents (next patch in the series) and trigger a WARN() when such cases are found, and then calling btrfs_check_leaf_full() at the end of btrfs_insert_file_extent() made the issue much easier to detect. Running btrfs/072 with that change to the tree checker and making fsstress open files always with O_SYNC made it much easier to trigger the issue (as triggering it with generic/127 is very rare). CC: stable@vger.kernel.org # 3.16+ Reviewed-by: Josef Bacik Signed-off-by: Filipe Manana Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 8cb551ce97f4747908cba43a2fe50f6fc653c568 Author: Filipe Manana Date: Mon May 6 16:43:51 2019 +0100 Btrfs: avoid fallback to transaction commit during fsync of files with holes commit ebb929060aeb162417b4c1307e63daee47b208d9 upstream. When we are doing a full fsync (bit BTRFS_INODE_NEEDS_FULL_SYNC set) of a file that has holes and has file extent items spanning two or more leafs, we can end up falling to back to a full transaction commit due to a logic bug that leads to failure to insert a duplicate file extent item that is meant to represent a hole between the last file extent item of a leaf and the first file extent item in the next leaf. The failure (EEXIST error) leads to a transaction commit (as most errors when logging an inode do). For example, we have the two following leafs: Leaf N: ----------------------------------------------- | ..., ..., ..., (257, FILE_EXTENT_ITEM, 64K) | ----------------------------------------------- The file extent item at the end of leaf N has a length of 4Kb, representing the file range from 64K to 68K - 1. Leaf N + 1: ----------------------------------------------- | (257, FILE_EXTENT_ITEM, 72K), ..., ..., ... | ----------------------------------------------- The file extent item at the first slot of leaf N + 1 has a length of 4Kb too, representing the file range from 72K to 76K - 1. During the full fsync path, when we are at tree-log.c:copy_items() with leaf N as a parameter, after processing the last file extent item, that represents the extent at offset 64K, we take a look at the first file extent item at the next leaf (leaf N + 1), and notice there's a 4K hole between the two extents, and therefore we insert a file extent item representing that hole, starting at file offset 68K and ending at offset 72K - 1. However we don't update the value of *last_extent, which is used to represent the end offset (plus 1, non-inclusive end) of the last file extent item inserted in the log, so it stays with a value of 68K and not with a value of 72K. Then, when copy_items() is called for leaf N + 1, because the value of *last_extent is smaller then the offset of the first extent item in the leaf (68K < 72K), we look at the last file extent item in the previous leaf (leaf N) and see it there's a 4K gap between it and our first file extent item (again, 68K < 72K), so we decide to insert a file extent item representing the hole, starting at file offset 68K and ending at offset 72K - 1, this insertion will fail with -EEXIST being returned from btrfs_insert_file_extent() because we already inserted a file extent item representing a hole for this offset (68K) in the previous call to copy_items(), when processing leaf N. The -EEXIST error gets propagated to the fsync callback, btrfs_sync_file(), which falls back to a full transaction commit. Fix this by adjusting *last_extent after inserting a hole when we had to look at the next leaf. Fixes: 4ee3fad34a9c ("Btrfs: fix fsync after hole punching when using no-holes feature") Cc: stable@vger.kernel.org # 4.14+ Reviewed-by: Josef Bacik Signed-off-by: Filipe Manana Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 5f856b4d30694757e62eed9330d0cd2c78de7667 Author: Filipe Manana Date: Mon Apr 29 13:08:14 2019 +0100 Btrfs: do not abort transaction at btrfs_update_root() after failure to COW path commit 72bd2323ec87722c115a5906bc6a1b31d11e8f54 upstream. Currently when we fail to COW a path at btrfs_update_root() we end up always aborting the transaction. However all the current callers of btrfs_update_root() are able to deal with errors returned from it, many do end up aborting the transaction themselves (directly or not, such as the transaction commit path), other BUG_ON() or just gracefully cancel whatever they were doing. When syncing the fsync log, we call btrfs_update_root() through tree-log.c:update_log_root(), and if it returns an -ENOSPC error, the log sync code does not abort the transaction, instead it gracefully handles the error and returns -EAGAIN to the fsync handler, so that it falls back to a transaction commit. Any other error different from -ENOSPC, makes the log sync code abort the transaction. So remove the transaction abort from btrfs_update_log() when we fail to COW a path to update the root item, so that if an -ENOSPC failure happens we avoid aborting the current transaction and have a chance of the fsync succeeding after falling back to a transaction commit. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203413 Fixes: 79787eaab46121 ("btrfs: replace many BUG_ONs with proper error handling") Cc: stable@vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana Reviewed-by: Anand Jain Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit daaa715bf66cea9b854faf839ecf2d83ad225e16 Author: Josef Bacik Date: Fri May 3 11:10:06 2019 -0400 btrfs: don't double unlock on error in btrfs_punch_hole commit 8fca955057b9c58467d1b231e43f19c4cf26ae8c upstream. If we have an error writing out a delalloc range in btrfs_punch_hole_lock_range we'll unlock the inode and then goto out_only_mutex, where we will again unlock the inode. This is bad, don't do this. Fixes: f27451f22996 ("Btrfs: add support for fallocate's zero range operation") CC: stable@vger.kernel.org # 4.19+ Reviewed-by: Filipe Manana Signed-off-by: Josef Bacik Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 2a72d79d5e5236fb367ed3cd68c22a565adbc11a Author: Andreas Gruenbacher Date: Fri May 17 19:18:43 2019 +0100 gfs2: Fix sign extension bug in gfs2_update_stats commit 5a5ec83d6ac974b12085cd99b196795f14079037 upstream. Commit 4d207133e9c3 changed the types of the statistic values in struct gfs2_lkstats from s64 to u64. Because of that, what should be a signed value in gfs2_update_stats turned into an unsigned value. When shifted right, we end up with a large positive value instead of a small negative value, which results in an incorrect variance estimate. Fixes: 4d207133e9c3 ("gfs2: Make statistics unsigned, suitable for use with do_div()") Signed-off-by: Andreas Gruenbacher Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: Greg Kroah-Hartman commit 0810191cb38bd37be47c463939bc165a03a9481e Author: Christoph Hellwig Date: Tue Apr 30 06:51:50 2019 -0400 arm64/iommu: handle non-remapped addresses in ->mmap and ->get_sgtable commit a98d9ae937d256ed679a935fc82d9deaa710d98e upstream. DMA allocations that can't sleep may return non-remapped addresses, but we do not properly handle them in the mmap and get_sgtable methods. Resolve non-vmalloc addresses using virt_to_page to handle this corner case. Cc: Acked-by: Catalin Marinas Reviewed-by: Robin Murphy Signed-off-by: Christoph Hellwig Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman commit ea6a37ae940e99fb49386a75a45825156d9a415d Author: Ard Biesheuvel Date: Thu May 23 10:17:37 2019 +0100 arm64/kernel: kaslr: reduce module randomization range to 2 GB commit b2eed9b58811283d00fa861944cb75797d4e52a7 upstream. The following commit 7290d5809571 ("module: use relative references for __ksymtab entries") updated the ksymtab handling of some KASLR capable architectures so that ksymtab entries are emitted as pairs of 32-bit relative references. This reduces the size of the entries, but more importantly, it gets rid of statically assigned absolute addresses, which require fixing up at boot time if the kernel is self relocating (which takes a 24 byte RELA entry for each member of the ksymtab struct). Since ksymtab entries are always part of the same module as the symbol they export, it was assumed at the time that a 32-bit relative reference is always sufficient to capture the offset between a ksymtab entry and its target symbol. Unfortunately, this is not always true: in the case of per-CPU variables, a per-CPU variable's base address (which usually differs from the actual address of any of its per-CPU copies) is allocated in the vicinity of the ..data.percpu section in the core kernel (i.e., in the per-CPU reserved region which follows the section containing the core kernel's statically allocated per-CPU variables). Since we randomize the module space over a 4 GB window covering the core kernel (based on the -/+ 4 GB range of an ADRP/ADD pair), we may end up putting the core kernel out of the -/+ 2 GB range of 32-bit relative references of module ksymtab entries that refer to per-CPU variables. So reduce the module randomization range a bit further. We lose 1 bit of randomization this way, but this is something we can tolerate. Cc: # v4.19+ Signed-off-by: Ard Biesheuvel Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman commit c4a9c92cdf5d9b4cdc82e7a5e1410ca32f351a97 Author: Dan Williams Date: Thu May 16 17:05:21 2019 -0700 libnvdimm/pmem: Bypass CONFIG_HARDENED_USERCOPY overhead commit 52f476a323f9efc959be1c890d0cdcf12e1582e0 upstream. Jeff discovered that performance improves from ~375K iops to ~519K iops on a simple psync-write fio workload when moving the location of 'struct page' from the default PMEM location to DRAM. This result is surprising because the expectation is that 'struct page' for dax is only needed for third party references to dax mappings. For example, a dax-mapped buffer passed to another system call for direct-I/O requires 'struct page' for sending the request down the driver stack and pinning the page. There is no usage of 'struct page' for first party access to a file via read(2)/write(2) and friends. However, this "no page needed" expectation is violated by CONFIG_HARDENED_USERCOPY and the check_copy_size() performed in copy_from_iter_full_nocache() and copy_to_iter_mcsafe(). The check_heap_object() helper routine assumes the buffer is backed by a slab allocator (DRAM) page and applies some checks. Those checks are invalid, dax pages do not originate from the slab, and redundant, dax_iomap_actor() has already validated that the I/O is within bounds. Specifically that routine validates that the logical file offset is within bounds of the file, then it does a sector-to-pfn translation which validates that the physical mapping is within bounds of the block device. Bypass additional hardened usercopy overhead and call the 'no check' versions of the copy_{to,from}_iter operations directly. Fixes: 0aed55af8834 ("x86, uaccess: introduce copy_from_iter_flushcache...") Cc: Cc: Jeff Moyer Cc: Ingo Molnar Cc: Christoph Hellwig Cc: Al Viro Cc: Thomas Gleixner Cc: Matthew Wilcox Reported-and-tested-by: Jeff Smits Acked-by: Kees Cook Acked-by: Jan Kara Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman commit 705068d5b0d205519f7803cf02d42e21118cde41 Author: Suthikulpanit, Suravee Date: Tue May 14 15:49:52 2019 +0000 kvm: svm/avic: fix off-by-one in checking host APIC ID commit c9bcd3e3335d0a29d89fabd2c385e1b989e6f1b0 upstream. Current logic does not allow VCPU to be loaded onto CPU with APIC ID 255. This should be allowed since the host physical APIC ID field in the AVIC Physical APIC table entry is an 8-bit value, and APIC ID 255 is valid in system with x2APIC enabled. Instead, do not allow VCPU load if the host APIC ID cannot be represented by an 8-bit value. Also, use the more appropriate AVIC_PHYSICAL_ID_ENTRY_HOST_PHYSICAL_ID_MASK instead of AVIC_MAX_PHYSICAL_ID_COUNT. Signed-off-by: Suravee Suthikulpanit Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit 12294d0754855f04cc04e9593172916848e2244a Author: Trac Hoang Date: Thu May 9 10:24:27 2019 -0700 mmc: sdhci-iproc: Set NO_HISPD bit to fix HS50 data hold time problem commit ec0970e0a1b2c807c908d459641a9f9a1be3e130 upstream. The iproc host eMMC/SD controller hold time does not meet the specification in the HS50 mode. This problem can be mitigated by disabling the HISPD bit; thus forcing the controller output data to be driven on the falling clock edges rather than the rising clock edges. Stable tag (v4.12+) chosen to assist stable kernel maintainers so that the change does not produce merge conflicts backporting to older kernel versions. In reality, the timing bug existed since the driver was first introduced but there is no need for this driver to be supported in kernel versions that old. Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Trac Hoang Signed-off-by: Scott Branden Acked-by: Adrian Hunter Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit 56e675b4574f55c053901d5786860969e23fa93f Author: Trac Hoang Date: Thu May 9 10:24:26 2019 -0700 mmc: sdhci-iproc: cygnus: Set NO_HISPD bit to fix HS50 data hold time problem commit b7dfa695afc40d5396ed84b9f25aa3754de23e39 upstream. The iproc host eMMC/SD controller hold time does not meet the specification in the HS50 mode. This problem can be mitigated by disabling the HISPD bit; thus forcing the controller output data to be driven on the falling clock edges rather than the rising clock edges. This change applies only to the Cygnus platform. Stable tag (v4.12+) chosen to assist stable kernel maintainers so that the change does not produce merge conflicts backporting to older kernel versions. In reality, the timing bug existed since the driver was first introduced but there is no need for this driver to be supported in kernel versions that old. Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Trac Hoang Signed-off-by: Scott Branden Acked-by: Adrian Hunter Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit 9bf84809e45ea8c974c90880cbcf1bf7a6e4fa83 Author: Daniel Axtens Date: Wed May 15 20:24:50 2019 +1000 crypto: vmx - CTR: always increment IV as quadword commit 009b30ac7444c17fae34c4f435ebce8e8e2b3250 upstream. The kernel self-tests picked up an issue with CTR mode: alg: skcipher: p8_aes_ctr encryption test failed (wrong result) on test vector 3, cfg="uneven misaligned splits, may sleep" Test vector 3 has an IV of FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD, so after 3 increments it should wrap around to 0. In the aesp8-ppc code from OpenSSL, there are two paths that increment IVs: the bulk (8 at a time) path, and the individual path which is used when there are fewer than 8 AES blocks to process. In the bulk path, the IV is incremented with vadduqm: "Vector Add Unsigned Quadword Modulo", which does 128-bit addition. In the individual path, however, the IV is incremented with vadduwm: "Vector Add Unsigned Word Modulo", which instead does 4 32-bit additions. Thus the IV would instead become FFFFFFFFFFFFFFFFFFFFFFFF00000000, throwing off the result. Use vadduqm. This was probably a typo originally, what with q and w being adjacent. It is a pretty narrow edge case: I am really impressed by the quality of the kernel self-tests! Fixes: 5c380d623ed3 ("crypto: vmx - Add support for VMS instructions by ASM") Cc: stable@vger.kernel.org Signed-off-by: Daniel Axtens Acked-by: Nayna Jain Tested-by: Nayna Jain Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit 9039c80c8c804951e0405a61ccbb112b5439c4f8 Author: Eric Biggers Date: Tue May 14 16:13:15 2019 -0700 crypto: hash - fix incorrect HASH_MAX_DESCSIZE commit e1354400b25da645c4764ed6844d12f1582c3b66 upstream. The "hmac(sha3-224-generic)" algorithm has a descsize of 368 bytes, which is greater than HASH_MAX_DESCSIZE (360) which is only enough for sha3-224-generic. The check in shash_prepare_alg() doesn't catch this because the HMAC template doesn't set descsize on the algorithms, but rather sets it on each individual HMAC transform. This causes a stack buffer overflow when SHASH_DESC_ON_STACK() is used with hmac(sha3-224-generic). Fix it by increasing HASH_MAX_DESCSIZE to the real maximum. Also add a sanity check to hmac_init(). This was detected by the improved crypto self-tests in v5.2, by loading the tcrypt module with CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y enabled. I didn't notice this bug when I ran the self-tests by requesting the algorithms via AF_ALG (i.e., not using tcrypt), probably because the stack layout differs in the two cases and that made a difference here. KASAN report: BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:359 [inline] BUG: KASAN: stack-out-of-bounds in shash_default_import+0x52/0x80 crypto/shash.c:223 Write of size 360 at addr ffff8880651defc8 by task insmod/3689 CPU: 2 PID: 3689 Comm: insmod Tainted: G E 5.1.0-10741-g35c99ffa20edd #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x86/0xc5 lib/dump_stack.c:113 print_address_description+0x7f/0x260 mm/kasan/report.c:188 __kasan_report+0x144/0x187 mm/kasan/report.c:317 kasan_report+0x12/0x20 mm/kasan/common.c:614 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x137/0x190 mm/kasan/generic.c:191 memcpy+0x37/0x50 mm/kasan/common.c:125 memcpy include/linux/string.h:359 [inline] shash_default_import+0x52/0x80 crypto/shash.c:223 crypto_shash_import include/crypto/hash.h:880 [inline] hmac_import+0x184/0x240 crypto/hmac.c:102 hmac_init+0x96/0xc0 crypto/hmac.c:107 crypto_shash_init include/crypto/hash.h:902 [inline] shash_digest_unaligned+0x9f/0xf0 crypto/shash.c:194 crypto_shash_digest+0xe9/0x1b0 crypto/shash.c:211 generate_random_hash_testvec.constprop.11+0x1ec/0x5b0 crypto/testmgr.c:1331 test_hash_vs_generic_impl+0x3f7/0x5c0 crypto/testmgr.c:1420 __alg_test_hash+0x26d/0x340 crypto/testmgr.c:1502 alg_test_hash+0x22e/0x330 crypto/testmgr.c:1552 alg_test.part.7+0x132/0x610 crypto/testmgr.c:4931 alg_test+0x1f/0x40 crypto/testmgr.c:4952 Fixes: b68a7ec1e9a3 ("crypto: hash - Remove VLA usage") Reported-by: Corentin Labbe Cc: # v4.20+ Cc: Kees Cook Signed-off-by: Eric Biggers Reviewed-by: Kees Cook Tested-by: Corentin Labbe Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit 02aef370045dcce64a9e5bc4981c7630c0d38635 Author: Martin K. Petersen Date: Mon May 20 10:57:18 2019 -0400 Revert "scsi: sd: Keep disk read-only when re-reading partition" commit 8acf608e602f6ec38b7cc37b04c80f1ce9a1a6cc upstream. This reverts commit 20bd1d026aacc5399464f8328f305985c493cde3. This patch introduced regressions for devices that come online in read-only state and subsequently switch to read-write. Given how the partition code is currently implemented it is not possible to persist the read-only flag across a device revalidate call. This may need to get addressed in the future since it is common for user applications to proactively call BLKRRPART. Reverting this commit will re-introduce a regression where a device-initiated revalidate event will cause the admin state to be forgotten. A separate patch will address this issue. Fixes: 20bd1d026aac ("scsi: sd: Keep disk read-only when re-reading partition") Cc: Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit 01b861eff8e5e78c41b6a7311a81d47a3204e9c1 Author: Andrea Parri Date: Mon May 20 19:23:57 2019 +0200 sbitmap: fix improper use of smp_mb__before_atomic() commit a0934fd2b1208458e55fc4b48f55889809fce666 upstream. This barrier only applies to the read-modify-write operations; in particular, it does not apply to the atomic_set() primitive. Replace the barrier with an smp_mb(). Fixes: 6c0ca7ae292ad ("sbitmap: fix wakeup hang after sbq resize") Cc: stable@vger.kernel.org Reported-by: "Paul E. McKenney" Reported-by: Peter Zijlstra Signed-off-by: Andrea Parri Reviewed-by: Ming Lei Cc: Jens Axboe Cc: Omar Sandoval Cc: Ming Lei Cc: linux-block@vger.kernel.org Cc: "Paul E. McKenney" Cc: Peter Zijlstra Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 7fa4a5ef495b421be522cfd00d81a844307d94b4 Author: Andrea Parri Date: Mon May 20 19:23:56 2019 +0200 bio: fix improper use of smp_mb__before_atomic() commit f381c6a4bd0ae0fde2d6340f1b9bb0f58d915de6 upstream. This barrier only applies to the read-modify-write operations; in particular, it does not apply to the atomic_set() primitive. Replace the barrier with an smp_mb(). Fixes: dac56212e8127 ("bio: skip atomic inc/dec of ->bi_cnt for most use cases") Cc: stable@vger.kernel.org Reported-by: "Paul E. McKenney" Reported-by: Peter Zijlstra Signed-off-by: Andrea Parri Reviewed-by: Ming Lei Cc: Jens Axboe Cc: Ming Lei Cc: linux-block@vger.kernel.org Cc: "Paul E. McKenney" Cc: Peter Zijlstra Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 312de8445d968d1010ff81ea708fe1762db60ffc Author: Paolo Bonzini Date: Fri May 24 21:52:46 2019 +0200 KVM: x86: fix return value for reserved EFER commit 66f61c92889ff3ca365161fb29dd36d6354682ba upstream. Commit 11988499e62b ("KVM: x86: Skip EFER vs. guest CPUID checks for host-initiated writes", 2019-04-02) introduced a "return false" in a function returning int, and anyway set_efer has a "nonzero on error" conventon so it should be returning 1. Reported-by: Pavel Machek Fixes: 11988499e62b ("KVM: x86: Skip EFER vs. guest CPUID checks for host-initiated writes") Cc: Sean Christopherson Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit 41667c1c6f6a26d86b4d018ad72cea46184fa594 Author: Jan Kara Date: Thu May 23 23:07:08 2019 -0400 ext4: wait for outstanding dio during truncate in nojournal mode commit 82a25b027ca48d7ef197295846b352345853dfa8 upstream. We didn't wait for outstanding direct IO during truncate in nojournal mode (as we skip orphan handling in that case). This can lead to fs corruption or stale data exposure if truncate ends up freeing blocks and these get reallocated before direct IO finishes. Fix the condition determining whether the wait is necessary. CC: stable@vger.kernel.org Fixes: 1c9114f9c0f1 ("ext4: serialize unlocked dio reads with truncate") Reviewed-by: Ira Weiny Signed-off-by: Jan Kara Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman commit 02ef0400e80388cba4f7eec78ea9782fd7424bfb Author: Jan Kara Date: Thu May 23 23:35:28 2019 -0400 ext4: do not delete unlinked inode from orphan list on failed truncate commit ee0ed02ca93ef1ecf8963ad96638795d55af2c14 upstream. It is possible that unlinked inode enters ext4_setattr() (e.g. if somebody calls ftruncate(2) on unlinked but still open file). In such case we should not delete the inode from the orphan list if truncate fails. Note that this is mostly a theoretical concern as filesystem is corrupted if we reach this path anyway but let's be consistent in our orphan handling. Reviewed-by: Ira Weiny Signed-off-by: Jan Kara Signed-off-by: Theodore Ts'o Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman commit c607bd396315f34af275f93ea50c9ef91bc7fc80 Author: Steven Rostedt (VMware) Date: Sat May 11 08:32:40 2019 -0400 x86: Hide the int3_emulate_call/jmp functions from UML commit 693713cbdb3a4bda5a8a678c31f06560bbb14657 upstream. User Mode Linux does not have access to the ip or sp fields of the pt_regs, and accessing them causes UML to fail to build. Hide the int3_emulate_jmp() and int3_emulate_call() instructions from UML, as it doesn't need them anyway. Reported-by: kbuild test robot Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman