patch-2.4.22 linux-2.4.22/include/asm-arm/arch-sa1100/adsbitsyplus.h

• Lines: 71
• Date: 2003-08-25 04:44:43.000000000 -0700
• Orig file: linux-2.4.21/include/asm-arm/arch-sa1100/adsbitsyplus.h
• Orig date: 1969-12-31 16:00:00.000000000 -0800

diff -urN linux-2.4.21/include/asm-arm/arch-sa1100/adsbitsyplus.h linux-2.4.22/include/asm-arm/arch-sa1100/adsbitsyplus.h
@@ -0,0 +1,70 @@
+/*
+ * linux/include/asm-arm/arch-sa1100/adsbitsy.h
+ *
+ * Created Feb 7, 2003 by Robert Whaley <rwhaley@applieddata.net>
+ *
+ * This file comes from adsbitsy.h of Woojung Huh <whuh@applieddata.net>
+ *
+ * This file contains the hardware specific definitions for the
+ * ADS Bitsy Board
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#error "include <asm/hardware.h> instead"
+#endif
+
+#define ADS_CPLD_BASE		(0x10000000)
+#define ADS_p2v( x )		((x) - ADS_CPLD_BASE + 0xf1000000)
+#define ADS_v2p( x )		((x) - 0xf1000000 + ADS_CPLD_BASE)
+
+
+#define _ADS_CPLD_IO1                0x10000000
+#define _ADS_CPLD_IO2                0x10000004
+#define _ADS_CPLD_IODR1              0x10000008
+#define _ADS_CPLD_IODR2              0x1000000C
+#define _ADS_CPLD_PCON               0x10000010
+#define _ADS_CPLD_SUPPC              0x10000014
+
+/* IO bits */
+#define ADS_IO1_MASK 0xFF
+#define ADS_IO2_MASK 0x03
+
+#define ADS_IO1_BIT0 0x01
+#define ADS_IO1_BIT1 0x02
+#define ADS_IO1_BIT2 0x04
+#define ADS_IO1_BIT3 0x08
+#define ADS_IO1_BIT4 0x10
+#define ADS_IO1_BIT5 0x20
+#define ADS_IO1_BIT6 0x40
+#define ADS_IO1_BIT7 0x80
+#define ADS_IO2_BIT8 0x01
+#define ADS_IO2_BIT9 0x02
+
+#define ADS_IO2_CPLD_REV_MASK 0xF0
+#define ADS_IO2_CPLD_REV_5_MAGIC 0x30
+
+#define ADS_PCON_PANEL_ON   0x01
+#define ADS_PCON_AUDIO_ON   0x02
+#define ADS_PCON_AUDIOPA_ON 0x04
+#define ADS_PCON_COM1_3_ON  0x08
+#define ADS_PCON_CONN_B_PE1 0x10
+#define ADS_PCON_CONN_B_PE2 0x20
+
+#define ADS_SUPPC_VEE_ON     0x01
+#define ADS_SUPPC_TS_SPI_SEL 0x02
+#define ADS_SUPPC_CB_SPI_SEL 0x04
+#define ADS_SUPPC_AVR_WKP    0x08
+
+/* Virtual register addresses */
+
+#ifndef __ASSEMBLY__
+#define ADS_CPLD_IO1                (*((volatile u_char *) ADS_p2v(_ADS_CPLD_IO1)))
+#define ADS_CPLD_IO2                (*((volatile u_char *) ADS_p2v(_ADS_CPLD_IO2)))
+#define ADS_CPLD_IODR1              (*((volatile u_char *) ADS_p2v(_ADS_CPLD_IODR1)))
+#define ADS_CPLD_IODR2              (*((volatile u_char *) ADS_p2v(_ADS_CPLD_IODR2)))
+#define ADS_CPLD_PCON               (*((volatile u_char *) ADS_p2v(_ADS_CPLD_PCON)))
+#define ADS_CPLD_SUPPC              (*((volatile u_char *) ADS_p2v(_ADS_CPLD_SUPPC)))
+
+#endif
+
+#define ADSBITSYPLUS_SA1111_BASE	(0x18000000)