patch-2.4.20 linux-2.4.20/arch/ppc/kernel/oak_setup.c

• Lines: 298
• Date: Wed Dec 31 16:00:00 1969
• Orig file: linux-2.4.19/arch/ppc/kernel/oak_setup.c
• Orig date: Fri Nov 16 10:10:08 2001

diff -urN linux-2.4.19/arch/ppc/kernel/oak_setup.c linux-2.4.20/arch/ppc/kernel/oak_setup.c
@@ -1,297 +0,0 @@
-/*
- * BK Id: SCCS/s.oak_setup.c 1.12 11/13/01 21:26:07 paulus
- */
-/*
- *
- *    Copyright (c) 1999-2000 Grant Erickson <grant@lcse.umn.edu>
- *
- *    Module name: oak_setup.c
- *
- *    Description:
- *      Architecture- / platform-specific boot-time initialization code for
- *      the IBM PowerPC 403GCX "Oak" evaluation board. Adapted from original
- *      code by Gary Thomas, Cort Dougan <cort@fsmlabs.com>, and Dan Malek
- *      <dan@net4x.com>.
- *
- */
-
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/threads.h>
-#include <linux/interrupt.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/blk.h>
-#include <linux/seq_file.h>
-
-#include <asm/processor.h>
-#include <asm/board.h>
-#include <asm/machdep.h>
-#include <asm/page.h>
-
-#include "local_irq.h"
-#include "ppc4xx_pic.h"
-#include <asm/time.h>
-#include "oak_setup.h"
-
-
-
-
-
-
-
-/* Function Prototypes */
-
-extern void abort(void);
-
-/* Global Variables */
-
-unsigned char __res[sizeof(bd_t)];
-
-
-/*
- * void __init oak_init()
- *
- * Description:
- *   This routine...
- *
- * Input(s):
- *   r3 - Optional pointer to a board information structure.
- *   r4 - Optional pointer to the physical starting address of the init RAM
- *        disk.
- *   r5 - Optional pointer to the physical ending address of the init RAM
- *        disk.
- *   r6 - Optional pointer to the physical starting address of any kernel
- *        command-line parameters.
- *   r7 - Optional pointer to the physical ending address of any kernel
- *        command-line parameters.
- *
- * Output(s):
- *   N/A
- *
- * Returns:
- *   N/A
- *
- */
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5, 
-	      unsigned long r6, unsigned long r7)
-{
-	/*
-	 * If we were passed in a board information, copy it into the
-	 * residual data area.
-	 */
-	if (r3) {
-		memcpy((void *)__res, (void *)(r3 + KERNELBASE), sizeof(bd_t));
-	}
-
-#if defined(CONFIG_BLK_DEV_INITRD)
-	/*
-	 * If the init RAM disk has been configured in, and there's a valid
-	 * starting address for it, set it up.
-	 */
-	if (r4) {
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif /* CONFIG_BLK_DEV_INITRD */
-
-	/* Copy the kernel command line arguments to a safe place. */
-
-	if (r6) {
- 		*(char *)(r7 + KERNELBASE) = 0;
-		strcpy(cmd_line, (char *)(r6 + KERNELBASE));
-	}
-
-	/* Initialize machine-dependency vectors */
-
-	ppc_md.setup_arch	 	= oak_setup_arch;
-	ppc_md.show_percpuinfo	 	= oak_show_percpuinfo;
-	ppc_md.irq_cannonicalize 	= NULL;
-	ppc_md.init_IRQ		 	= oak_init_IRQ;
-	ppc_md.get_irq		 	= oak_get_irq;
-	ppc_md.init		 	= NULL;
-
-	ppc_md.restart		 	= oak_restart;
-	ppc_md.power_off	 	= oak_power_off;
-	ppc_md.halt		 	= oak_halt;
-
-	ppc_md.time_init	 	= oak_time_init;
-	ppc_md.set_rtc_time	 	= oak_set_rtc_time;
-	ppc_md.get_rtc_time	 	= oak_get_rtc_time;
-	ppc_md.calibrate_decr	 	= oak_calibrate_decr;
-
-	ppc_md.kbd_setkeycode    	= NULL;
-	ppc_md.kbd_getkeycode    	= NULL;
-	ppc_md.kbd_translate     	= NULL;
-	ppc_md.kbd_unexpected_up 	= NULL;
-	ppc_md.kbd_leds          	= NULL;
-	ppc_md.kbd_init_hw       	= NULL;
-	ppc_md.ppc_kbd_sysrq_xlate	= NULL;
-}
-
-/*
- * Document me.
- */
-void __init
-oak_setup_arch(void)
-{
-	/* XXX - Implement me */
-}
-
-/*
- * int oak_show_percpuinfo()
- *
- * Description:
- *   This routine pretty-prints the platform's internal CPU and bus clock
- *   frequencies into the buffer for usage in /proc/cpuinfo.
- *
- * Input(s):
- *  *buffer - Buffer into which CPU and bus clock frequencies are to be
- *            printed.
- *
- * Output(s):
- *  *buffer - Buffer with the CPU and bus clock frequencies.
- *
- * Returns:
- *   The number of bytes copied into 'buffer' if OK, otherwise zero or less
- *   on error.
- */
-int
-oak_show_percpuinfo(struct seq_file *m, int i)
-{
-	bd_t *bp = (bd_t *)__res;
-
-	seq_printf(m, "clock\t\t: %dMHz\n"
-		   "bus clock\t\t: %dMHz\n",
-		   bp->bi_intfreq / 1000000,
-		   bp->bi_busfreq / 1000000);
-
-	return 0;
-}
-
-/*
- * Document me.
- */
-void __init
-oak_init_IRQ(void)
-{
-	int i;
-
-	ppc4xx_pic_init();
-
-	for (i = 0; i < NR_IRQS; i++) {
-		irq_desc[i].handler = ppc4xx_pic;
-	}
-
-	return;
-}
-
-/*
- * Document me.
- */
-int
-oak_get_irq(struct pt_regs *regs)
-{
-	return (ppc4xx_pic_get_irq(regs));
-}
-
-/*
- * Document me.
- */
-void
-oak_restart(char *cmd)
-{
-	abort();
-}
-
-/*
- * Document me.
- */
-void
-oak_power_off(void)
-{
-	oak_restart(NULL);
-}
-
-/*
- * Document me.
- */
-void
-oak_halt(void)
-{
-	oak_restart(NULL);
-}
-
-/*
- * Document me.
- */
-long __init
-oak_time_init(void)
-{
-	/* XXX - Implement me */
-	return 0;
-}
-
-/*
- * Document me.
- */
-int __init
-oak_set_rtc_time(unsigned long time)
-{
-	/* XXX - Implement me */
-
-	return (0);
-}
-
-/*
- * Document me.
- */
-unsigned long __init
-oak_get_rtc_time(void)
-{
-	/* XXX - Implement me */
-
-	return (0);
-}
-
-/*
- * void __init oak_calibrate_decr()
- *
- * Description:
- *   This routine retrieves the internal processor frequency from the board
- *   information structure, sets up the kernel timer decrementer based on
- *   that value, enables the 403 programmable interval timer (PIT) and sets
- *   it up for auto-reload.
- *
- * Input(s):
- *   N/A
- *
- * Output(s):
- *   N/A
- *
- * Returns:
- *   N/A
- *
- */
-void __init
-oak_calibrate_decr(void)
-{
-	unsigned int freq;
-	bd_t *bip = (bd_t *)__res;
-
-	freq = bip->bi_intfreq;
-
-	decrementer_count = freq / HZ;
-	count_period_num = 1;
-	count_period_den = freq;
-
-	/* Enable the PIT and set auto-reload of its value */
-
-	mtspr(SPRN_TCR, TCR_PIE | TCR_ARE);
-
-	/* Clear any pending timer interrupts */
-
-	mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_PIS | TSR_FIS);
-}