patch-2.4.21 linux-2.4.21/drivers/usb/serial/kobil_sct.h

Next file: linux-2.4.21/drivers/usb/serial/pl2303.c
Previous file: linux-2.4.21/drivers/usb/serial/kobil_sct.c
Back to the patch index
Back to the overall index

diff -urN linux-2.4.20/drivers/usb/serial/kobil_sct.h linux-2.4.21/drivers/usb/serial/kobil_sct.h
@@ -0,0 +1,60 @@
+#define SUSBCRequest_SetBaudRateParityAndStopBits       1
+#define SUSBCR_SBR_MASK				0xFF00
+#define SUSBCR_SBR_1200				0x0100
+#define SUSBCR_SBR_9600				0x0200
+#define SUSBCR_SBR_19200			0x0400
+#define SUSBCR_SBR_28800			0x0800
+#define SUSBCR_SBR_38400			0x1000
+#define SUSBCR_SBR_57600			0x2000
+#define SUSBCR_SBR_115200			0x4000
+
+#define SUSBCR_SPASB_MASK			0x0070
+#define SUSBCR_SPASB_NoParity			0x0010
+#define SUSBCR_SPASB_OddParity			0x0020
+#define SUSBCR_SPASB_EvenParity			0x0040
+
+#define SUSBCR_SPASB_STPMASK			0x0003
+#define SUSBCR_SPASB_1StopBit			0x0001
+#define SUSBCR_SPASB_2StopBits			0x0002
+
+#define SUSBCRequest_SetStatusLinesOrQueues	2
+#define SUSBCR_SSL_SETRTS			0x0001
+#define SUSBCR_SSL_CLRRTS			0x0002
+#define SUSBCR_SSL_SETDTR			0x0004
+#define SUSBCR_SSL_CLRDTR			0x0010
+
+#define SUSBCR_SSL_PURGE_TXABORT		0x0100  // Kill the pending/current writes to the comm port.
+#define SUSBCR_SSL_PURGE_RXABORT		0x0200  // Kill the pending/current reads to the comm port.
+#define SUSBCR_SSL_PURGE_TXCLEAR		0x0400  // Kill the transmit queue if there.
+#define SUSBCR_SSL_PURGE_RXCLEAR		0x0800  // Kill the typeahead buffer if there.
+
+#define SUSBCRequest_GetStatusLineState		4
+#define SUSBCR_GSL_RXCHAR			0x0001  // Any Character received
+#define SUSBCR_GSL_TXEMPTY			0x0004  // Transmitt Queue Empty
+#define SUSBCR_GSL_CTS				0x0008  // CTS changed state
+#define SUSBCR_GSL_DSR				0x0010  // DSR changed state
+#define SUSBCR_GSL_RLSD				0x0020  // RLSD changed state
+#define SUSBCR_GSL_BREAK			0x0040  // BREAK received
+#define SUSBCR_GSL_ERR				0x0080  // Line status error occurred
+#define SUSBCR_GSL_RING				0x0100  // Ring signal detected
+
+#define SUSBCRequest_Misc			8
+#define SUSBCR_MSC_ResetReader			0x0001	// use a predefined reset sequence
+#define SUSBCR_MSC_ResetAllQueues	        0x0002	// use a predefined sequence to reset the internal queues
+
+#define SUSBCRequest_GetMisc			0x10
+#define SUSBCR_MSC_GetFWVersion			0x0001	/* get the firmware version from device,
+							   coded like this 0xHHLLBBPP
+							   with HH = Firmware Version High Byte
+							   LL = Firmware Version Low Byte
+							   BB = Build Number
+							   PP = Further Attributes
+							*/
+
+#define SUSBCR_MSC_GetHWVersion			0x0002	/* get the hardware version from device
+							   coded like this 0xHHLLPPRR
+							   with HH = Software Version High Byte
+							   LL = Software Version Low Byte
+							   PP = Further Attributes
+							   RR = Reserved for the hardware ID 
+							*/

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)