patch-2.1.66 linux/drivers/char/ftape/lowlevel/ftape-proc.c
Next file: linux/drivers/char/ftape/lowlevel/ftape-proc.h
Previous file: linux/drivers/char/ftape/lowlevel/ftape-io.h
Back to the patch index
Back to the overall index
- Lines: 432
- Date:
Tue Nov 25 14:45:27 1997
- Orig file:
v2.1.65/linux/drivers/char/ftape/lowlevel/ftape-proc.c
- Orig date:
Wed Dec 31 16:00:00 1969
diff -u --recursive --new-file v2.1.65/linux/drivers/char/ftape/lowlevel/ftape-proc.c linux/drivers/char/ftape/lowlevel/ftape-proc.c
@@ -0,0 +1,431 @@
+/*
+ * Copyright (C) 1997 Claus-Justus Heine
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING. If not, write to
+ the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+ *
+ * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-proc.c,v $
+ * $Revision: 1.11 $
+ * $Date: 1997/10/24 14:47:37 $
+ *
+ * This file contains the procfs interface for the
+ * QIC-40/80/3010/3020 floppy-tape driver "ftape" for Linux.
+ */
+
+#include <linux/config.h>
+
+#if defined(CONFIG_PROC_FS) && defined(CONFIG_FT_PROC_FS)
+
+/* adding proc entries from inside a module is REALLY complicated
+ * for pre-2.1.28 kernels. I don't want to care about it.
+ */
+
+#include <linux/proc_fs.h>
+
+#include <linux/ftape.h>
+#if LINUX_VERSION_CODE <= KERNEL_VER(1,2,13) /* bail out */
+#error \
+Please disable CONFIG_FT_PROC_FS in "MCONFIG" or upgrade to a newer kernel!
+#endif
+#if LINUX_VERSION_CODE >= KERNEL_VER(2,1,16)
+#include <linux/init.h>
+#else
+#define __initdata
+#define __initfunc(__arg) __arg
+#endif
+#include <linux/qic117.h>
+
+
+#include "../lowlevel/ftape-io.h"
+#include "../lowlevel/ftape-ctl.h"
+#include "../lowlevel/ftape-proc.h"
+#include "../lowlevel/ftape-tracing.h"
+
+static int ftape_read_proc(char *page, char **start, off_t off,
+ int count, int *eof, void *data);
+
+#if LINUX_VERSION_CODE < KERNEL_VER(2,1,28)
+
+#include <asm/segment.h> /* for memcpy_tofs() */
+
+#if LINUX_VERSION_CODE >= KERNEL_VER(2,1,0)
+static long ftape_proc_read(struct inode* inode, struct file* file,
+ char* buf, unsigned long count);
+#else
+static int ftape_proc_read(struct inode* inode, struct file* file,
+ char* buf, int count);
+#endif
+
+#define FT_PROC_REGISTER(parent, child) proc_register_dynamic(parent, child)
+
+/*
+ * Structures for interfacing with the /proc filesystem.
+ * Router creates its own directory /proc/net/router with the folowing
+ * entries:
+ * config device configuration
+ * status global device statistics
+ * <device> entry for each WAN device
+ */
+
+/*
+ * Generic /proc/net/ftape/<file> file and inode operations
+ */
+
+
+static struct file_operations ftape_proc_fops =
+{
+ NULL, /* lseek */
+ ftape_proc_read, /* read */
+ NULL, /* write */
+ NULL, /* readdir */
+ NULL, /* select */
+ NULL, /* ioctl */
+ NULL, /* mmap */
+ NULL, /* no special open code */
+ NULL, /* no special release code */
+ NULL, /* can't fsync */
+};
+
+static struct inode_operations ftape_proc_inode_operations =
+{
+ &ftape_proc_fops,
+ NULL, /* create */
+ NULL, /* lookup */
+ NULL, /* link */
+ NULL, /* unlink */
+ NULL, /* symlink */
+ NULL, /* mkdir */
+ NULL, /* rmdir */
+ NULL, /* mknod */
+ NULL, /* rename */
+ NULL, /* readlink */
+ NULL, /* readpage */
+ NULL, /* writepage */
+ NULL, /* bmap */
+ NULL, /* truncate */
+ NULL, /* permission */
+};
+
+/*
+ * Proc filesystem directory entries.
+ */
+
+static int ftape_get_info(char *page, char **start, off_t off,
+ int count, int dummy)
+{
+ int dummy_eof;
+
+ return ftape_read_proc(page, start, off, count, &dummy_eof, NULL);
+}
+
+static struct proc_dir_entry proc_ftape = {
+ 0, /* low_ino */
+ sizeof("ftape")-1, /* namelen */
+ "ftape", /* name */
+ S_IFREG | S_IRUGO, /* mode */
+ 1, /* nlink */
+ 0, /* uid */
+ 0, /* gid */
+ 0, /* size */
+ &ftape_proc_inode_operations, /* ops */
+ ftape_get_info, /* get_info */
+ NULL, /* fill_inode */
+ NULL, /* next */
+ NULL, /* parent */
+ NULL, /* subdir */
+ NULL /* data */
+};
+
+/* Read ftape proc directory entry.
+ */
+
+#define PROC_BLOCK_SIZE PAGE_SIZE
+
+#if LINUX_VERSION_CODE >= KERNEL_VER(2,1,0)
+static long ftape_proc_read(struct inode * inode, struct file * file,
+ char * buf, unsigned long nbytes)
+#else
+static int ftape_proc_read(struct inode * inode, struct file * file,
+ char * buf, int nbytes)
+#endif
+{
+ char *page;
+ int retval=0;
+ int eof=0;
+ int n, count;
+ char *start;
+ struct proc_dir_entry * dp;
+
+ if (nbytes < 0)
+ return -EINVAL;
+ dp = (struct proc_dir_entry *) inode->u.generic_ip;
+ if (!(page = (char*) __get_free_page(GFP_KERNEL)))
+ return -ENOMEM;
+
+ while ((nbytes > 0) && !eof)
+ {
+ count = PROC_BLOCK_SIZE <= nbytes ? PROC_BLOCK_SIZE : nbytes;
+
+ start = NULL;
+ if (dp->get_info) {
+ /*
+ * Handle backwards compatibility with the old net
+ * routines.
+ *
+ * XXX What gives with the file->f_flags & O_ACCMODE
+ * test? Seems stupid to me....
+ */
+ n = dp->get_info(page, &start, file->f_pos, count,
+ (file->f_flags & O_ACCMODE) == O_RDWR);
+ if (n < count)
+ eof = 1;
+ } else
+ break;
+
+ if (!start) {
+ /*
+ * For proc files that are less than 4k
+ */
+ start = page + file->f_pos;
+ n -= file->f_pos;
+ if (n <= 0)
+ break;
+ if (n > count)
+ n = count;
+ }
+ if (n == 0)
+ break; /* End of file */
+ if (n < 0) {
+ if (retval == 0)
+ retval = n;
+ break;
+ }
+#if LINUX_VERSION_CODE > KERNEL_VER(2,1,3)
+ copy_to_user(buf, start, n);
+#else
+ memcpy_tofs(buf, start, n);
+#endif
+ file->f_pos += n; /* Move down the file */
+ nbytes -= n;
+ buf += n;
+ retval += n;
+ }
+ free_page((unsigned long) page);
+ return retval;
+}
+
+#else /* LINUX_VERSION_CODE < KERNEL_VER(2,1,28) */
+
+#define FT_PROC_REGISTER(parent, child) proc_register(parent, child)
+
+/*
+ * Proc filesystem directory entries.
+ */
+
+static struct proc_dir_entry proc_ftape = {
+ 0, /* low_ino */
+ sizeof("ftape")-1, /* namelen */
+ "ftape", /* name */
+ S_IFREG | S_IRUGO, /* mode */
+ 1, /* nlink */
+ 0, /* uid */
+ 0, /* gid */
+ 0, /* size */
+ NULL, /* ops */
+ NULL, /* get_info */
+ NULL, /* fill_inode */
+ NULL, /* next */
+ NULL, /* parent */
+ NULL, /* subdir */
+ NULL, /* data */
+ ftape_read_proc, /* read_proc */
+ NULL /* write_proc */
+};
+
+#endif
+
+static size_t get_driver_info(char *buf)
+{
+ const char *debug_level[] = { "bugs" ,
+ "errors",
+ "warnings",
+ "informational",
+ "noisy",
+ "program flow",
+ "fdc and dma",
+ "data flow",
+ "anything" };
+
+ return sprintf(buf,
+ "version : %s\n"
+ "used data rate: %d kbit/sec\n"
+ "dma memory : %d kb\n"
+ "debug messages: %s\n",
+ FTAPE_VERSION,
+ ft_data_rate,
+ FT_BUFF_SIZE * ft_nr_buffers >> 10,
+ debug_level[TRACE_LEVEL]);
+}
+
+static size_t get_tapedrive_info(char *buf)
+{
+ return sprintf(buf,
+ "vendor id : 0x%04x\n"
+ "drive name: %s\n"
+ "wind speed: %d ips\n"
+ "wakeup : %s\n"
+ "max. rate : %d kbit/sec\n",
+ ft_drive_type.vendor_id,
+ ft_drive_type.name,
+ ft_drive_type.speed,
+ ((ft_drive_type.wake_up == no_wake_up)
+ ? "No wakeup needed" :
+ ((ft_drive_type.wake_up == wake_up_colorado)
+ ? "Colorado" :
+ ((ft_drive_type.wake_up == wake_up_mountain)
+ ? "Mountain" :
+ ((ft_drive_type.wake_up == wake_up_insight)
+ ? "Motor on" :
+ "Unknown")))),
+ ft_drive_max_rate);
+}
+
+static size_t get_cartridge_info(char *buf)
+{
+ if (ftape_init_drive_needed) {
+ return sprintf(buf, "uninitialized\n");
+ }
+ if (ft_no_tape) {
+ return sprintf(buf, "no cartridge inserted\n");
+ }
+ return sprintf(buf,
+ "segments : %5d\n"
+ "tracks : %5d\n"
+ "length : %5dft\n"
+ "formatted : %3s\n"
+ "writable : %3s\n"
+ "QIC spec. : QIC-%s\n"
+ "fmt-code : %1d\n",
+ ft_segments_per_track,
+ ft_tracks_per_tape,
+ ftape_tape_len,
+ (ft_formatted == 1) ? "yes" : "no",
+ (ft_write_protected == 1) ? "no" : "yes",
+ ((ft_qic_std == QIC_TAPE_QIC40) ? "40" :
+ ((ft_qic_std == QIC_TAPE_QIC80) ? "80" :
+ ((ft_qic_std == QIC_TAPE_QIC3010) ? "3010" :
+ ((ft_qic_std == QIC_TAPE_QIC3020) ? "3020" :
+ "???")))),
+ ft_format_code);
+}
+
+static size_t get_controller_info(char *buf)
+{
+ const char *fdc_name[] = { "no fdc",
+ "i8272",
+ "i82077",
+ "i82077AA",
+ "Colorado FC-10 or FC-20",
+ "i82078",
+ "i82078_1" };
+
+ return sprintf(buf,
+ "FDC type : %s\n"
+ "FDC base : 0x%03x\n"
+ "FDC irq : %d\n"
+ "FDC dma : %d\n"
+ "FDC thr. : %d\n"
+ "max. rate : %d kbit/sec\n",
+ ft_mach2 ? "Mountain MACH-2" : fdc_name[fdc.type],
+ fdc.sra, fdc.irq, fdc.dma,
+ ft_fdc_threshold, ft_fdc_max_rate);
+}
+
+static size_t get_history_info(char *buf)
+{
+ size_t len;
+
+ len = sprintf(buf,
+ "\nFDC isr statistics\n"
+ " id_am_errors : %3d\n"
+ " id_crc_errors : %3d\n"
+ " data_am_errors : %3d\n"
+ " data_crc_errors : %3d\n"
+ " overrun_errors : %3d\n"
+ " no_data_errors : %3d\n"
+ " retries : %3d\n",
+ ft_history.id_am_errors, ft_history.id_crc_errors,
+ ft_history.data_am_errors, ft_history.data_crc_errors,
+ ft_history.overrun_errors, ft_history.no_data_errors,
+ ft_history.retries);
+ len += sprintf(buf + len,
+ "\nECC statistics\n"
+ " crc_errors : %3d\n"
+ " crc_failures : %3d\n"
+ " ecc_failures : %3d\n"
+ " sectors corrected: %3d\n",
+ ft_history.crc_errors, ft_history.crc_failures,
+ ft_history.ecc_failures, ft_history.corrected);
+ len += sprintf(buf + len,
+ "\ntape quality statistics\n"
+ " media defects : %3d\n",
+ ft_history.defects);
+ len += sprintf(buf + len,
+ "\ntape motion statistics\n"
+ " repositions : %3d\n",
+ ft_history.rewinds);
+ return len;
+}
+
+int ftape_read_proc(char *page, char **start, off_t off,
+ int count, int *eof, void *data)
+{
+ char *ptr = page;
+ size_t len;
+
+ ptr += sprintf(ptr, "Kernel Driver\n\n");
+ ptr += get_driver_info(ptr);
+ ptr += sprintf(ptr, "\nTape Drive\n\n");
+ ptr += get_tapedrive_info(ptr);
+ ptr += sprintf(ptr, "\nFDC Controller\n\n");
+ ptr += get_controller_info(ptr);
+ ptr += sprintf(ptr, "\nTape Cartridge\n\n");
+ ptr += get_cartridge_info(ptr);
+ ptr += sprintf(ptr, "\nHistory Record\n\n");
+ ptr += get_history_info(ptr);
+
+ len = strlen(page);
+ *start = 0;
+ if (off+count >= len) {
+ *eof = 1;
+ } else {
+ *eof = 0;
+ }
+ return len;
+}
+
+__initfunc(int ftape_proc_init(void))
+{
+ return FT_PROC_REGISTER(&proc_root, &proc_ftape);
+}
+
+#ifdef MODULE
+void ftape_proc_destroy(void)
+{
+ proc_unregister(&proc_root, proc_ftape.low_ino);
+}
+#endif
+
+#endif /* defined(CONFIG_PROC_FS) && defined(CONFIG_FT_PROC_FS) */
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov