From: her@compel.UUCP (Helge Egelund Rasmussen) Newsgroups: comp.sys.amiga.tech Subject: Turbo silver RGB picture file format Date: 18 Jul 90 07:47:29 GMT Here is the description of the RGBM AND RGB8 chunks used by Turbo Silver. ====================================================================== FORM RGBN and FORM RGB8 ----------------------- RGBN and RGB8 files are used in Impulse's Silver and Turbo Silver. They are almost identical to FORM ILBM's except for the BODY chunk and slight differences in the BMHD chunk. A CAMG chunk IS REQUIRED. The BMHD chunk specfies the number of bitplanes as 13, and the compressoin type as ??. The FORM RGBN uses 12 bit RGB values, and the FORM RGB8 uses 24 bit RGB values. The BODY chunk contains RGB values, a "genlock" bit, and repeat counts. In Silver, when "genlock" bit is set, a "zero color" is written into the bitplanes for genlock video to show through. In Diamond (a "paint" program, also by Impulse), the genlock bit is ignored if the file is loaded as a picture (and the RGB color is used instead), and if the file is loaded as a brush the genlock bit marks pixels that are not part of the brush. For both RGBN and RGB8 body chunks, each RGB value always has a repeat count. The values are written in different formats depending on the magnitude of the repeat count. For the RGBN BODY chunk: For each RGB value, a WORD (16-bits) is written: with the 12 RGB bits in the MSB (most significant bit) positions; the "genlock" bit next; and then a 3 bit repeat count. If the repeat count is greater than 7, the 3-bit count is zero, and a BYTE repeat count follows. If the repeat count is greater than 255, the BYTE count is zero, and a WORD repeat count follows. Repeat counts greater than 65536 are not supported. For the RGB8 body chunk: For each RGB value, a LONG-word (32 bits) is written: with the 24 RGB bits in the MSB positions; the "genlock" bit next, and then a 7 bit repeat count. If the repeat count is greater than 127, the same rules apply as in the RGBN BODY. Sample BODY code: if(!count) { if (Rgb8) { fread (&w, 4, 1, RGBFile); lock = w & 0x00000080; rgb = w >> 8; count = w & 0x0000007f; } else { w = (UWORD) getw (RGBFile); lock = w & 8; rgb = w >> 4; count = w & 7; } if (!count) if (!(count = (UBYTE) getc (RGBFile))) count = (UWORD) getw (RGBFile); } The pixels are scanned from left to right across horizontal lines, processing from top to bottom. The (12 or 24 bit) RGB values are stored with the red bits as the MSB's, the green bits next, and the blue bits as the LSB's. Special note: As of this writing (Sep 88), Silver does NOT support anything but black for color zero. --- Helge E. Rasmussen . PHONE + 45 31 37 11 00 . E-mail: her@compel.dk Compel A/S . FAX + 45 31 37 06 44 . Copenhagen, Denmark