patch-2.4.20 linux-2.4.20/arch/ppc/platforms/rpxlite.h

Next file: linux-2.4.20/arch/ppc/platforms/spd8xx.h
Previous file: linux-2.4.20/arch/ppc/platforms/rpxhiox.h
Back to the patch index
Back to the overall index

diff -urN linux-2.4.19/arch/ppc/platforms/rpxlite.h linux-2.4.20/arch/ppc/platforms/rpxlite.h
@@ -0,0 +1,84 @@
+/*
+ * BK Id: %F% %I% %G% %U% %#%
+ */
+
+/*
+ * A collection of structures, addresses, and values associated with
+ * the RPCG RPX-Lite board.  Copied from the MBX stuff.
+ *
+ * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
+ */
+#ifdef __KERNEL__
+#ifndef __MACH_RPX_DEFS
+#define __MACH_RPX_DEFS
+
+#include <linux/config.h>
+
+#ifndef __ASSEMBLY__
+/* A Board Information structure that is given to a program when
+ * prom starts it up.
+ */
+typedef struct bd_info {
+	unsigned int	bi_memstart;	/* Memory start address */
+	unsigned int	bi_memsize;	/* Memory (end) size in bytes */
+	unsigned int	bi_intfreq;	/* Internal Freq, in Hz */
+	unsigned int	bi_busfreq;	/* Bus Freq, in Hz */
+	unsigned char	bi_enetaddr[6];
+	unsigned int	bi_baudrate;
+} bd_t;
+
+extern bd_t m8xx_board_info;
+
+/* Memory map is configured by the PROM startup.
+ * We just map a few things we need.  The CSR is actually 4 byte-wide
+ * registers that can be accessed as 8-, 16-, or 32-bit values.
+ */
+#define RPX_CSR_ADDR		((uint)0xfa400000)
+#define RPX_CSR_SIZE		((uint)(4 * 1024))
+#define IMAP_ADDR		((uint)0xfa200000)
+#define IMAP_SIZE		((uint)(64 * 1024))
+#define PCMCIA_MEM_ADDR		((uint)0x04000000)
+#define PCMCIA_MEM_SIZE		((uint)(64 * 1024))
+#define PCMCIA_IO_ADDR		((uint)0x04400000)
+#define PCMCIA_IO_SIZE		((uint)(4 * 1024))
+
+/* Things of interest in the CSR.
+*/
+#define BCSR0_ETHEN		((uint)0x80000000)
+#define BCSR0_ETHLPBK		((uint)0x40000000)
+#define BCSR0_COLTESTDIS	((uint)0x20000000)
+#define BCSR0_FULLDPLXDIS	((uint)0x10000000)
+#define BCSR0_LEDOFF		((uint)0x08000000)
+#define BCSR0_USBDISABLE	((uint)0x04000000)
+#define BCSR0_USBHISPEED	((uint)0x02000000)
+#define BCSR0_USBPWREN		((uint)0x01000000)
+#define BCSR0_PCMCIAVOLT	((uint)0x000f0000)
+#define BCSR0_PCMCIA3VOLT	((uint)0x000a0000)
+#define BCSR0_PCMCIA5VOLT	((uint)0x00060000)
+
+#define BCSR1_IPB5SEL          ((uint)0x00100000)
+#define BCSR1_PCVCTL4          ((uint)0x00080000)
+#define BCSR1_PCVCTL5          ((uint)0x00040000)
+#define BCSR1_PCVCTL6          ((uint)0x00020000)
+#define BCSR1_PCVCTL7          ((uint)0x00010000)
+
+#if defined(CONFIG_HTDMSOUND)
+#include <platforms/rpxhiox.h>
+#endif
+#endif /* !__ASSEMBLY__ */
+
+/* define IO_BASE for pcmcia */
+#define _IO_BASE 0x80000000
+#define _IO_BASE_SIZE 0x1000
+
+#ifdef CONFIG_IDE
+#define MAX_HWIFS 1
+#define ide_request_irq(irq,hand,flg,dev,id)    request_8xxirq((irq),(hand),(flg),(dev),(id))
+#endif
+
+/* We don't use the 8259.
+*/
+#define NR_8259_INTS	0
+
+#endif
+#endif /* __KERNEL__ */

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)