patch-2.4.19 linux-2.4.19/include/asm-mips/sibyte/sb1250_regs.h
Next file: linux-2.4.19/include/asm-mips/sibyte/sb1250_scd.h
Previous file: linux-2.4.19/include/asm-mips/sibyte/sb1250_prof.h
Back to the patch index
Back to the overall index
- Lines: 745
- Date:
Fri Aug 2 17:39:45 2002
- Orig file:
linux-2.4.18/include/asm-mips/sibyte/sb1250_regs.h
- Orig date:
Wed Dec 31 16:00:00 1969
diff -urN linux-2.4.18/include/asm-mips/sibyte/sb1250_regs.h linux-2.4.19/include/asm-mips/sibyte/sb1250_regs.h
@@ -0,0 +1,744 @@
+/* *********************************************************************
+ * SB1250 Board Support Package
+ *
+ * Register Definitions File: sb1250_regs.h
+ *
+ * This module contains the addresses of the on-chip peripherals
+ * on the SB1250.
+ *
+ * SB1250 specification level: 0.2
+ *
+ * Author: Mitch Lichtenberg (mitch@sibyte.com)
+ *
+ *********************************************************************
+ *
+ * Copyright 2000,2001
+ * Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ********************************************************************* */
+
+
+#ifndef _SB1250_REGS_H
+#define _SB1250_REGS_H
+
+#include "sb1250_defs.h"
+
+
+/* *********************************************************************
+ * Some general notes:
+ *
+ * For the most part, when there is more than one peripheral
+ * of the same type on the SOC, the constants below will be
+ * offsets from the base of each peripheral. For example,
+ * the MAC registers are described as offsets from the first
+ * MAC register, and there will be a MAC_REGISTER() macro
+ * to calculate the base address of a given MAC.
+ *
+ * The information in this file is based on the SB1250 SOC
+ * manual version 0.2, July 2000.
+ ********************************************************************* */
+
+
+/* *********************************************************************
+ * Memory Controller Registers
+ ********************************************************************* */
+
+#define A_MC_BASE_0 0x0010051000
+#define A_MC_BASE_1 0x0010052000
+#define MC_REGISTER_SPACING 0x1000
+
+#define A_MC_BASE(ctlid) ((ctlid)*MC_REGISTER_SPACING+A_MC_BASE_0)
+#define A_MC_REGISTER(ctlid,reg) (A_MC_BASE(ctlid)+(reg))
+
+#define R_MC_CONFIG 0x0000000100
+#define R_MC_DRAMCMD 0x0000000120
+#define R_MC_DRAMMODE 0x0000000140
+#define R_MC_TIMING1 0x0000000160
+#define R_MC_TIMING2 0x0000000180
+#define R_MC_CS_START 0x00000001A0
+#define R_MC_CS_END 0x00000001C0
+#define R_MC_CS_INTERLEAVE 0x00000001E0
+#define S_MC_CS_STARTEND 16
+
+#define R_MC_CSX_BASE 0x0000000200
+#define R_MC_CSX_ROW 0x0000000000 /* relative to CSX_BASE, above */
+#define R_MC_CSX_COL 0x0000000020 /* relative to CSX_BASE, above */
+#define R_MC_CSX_BA 0x0000000040 /* relative to CSX_BASE, above */
+#define MC_CSX_SPACING 0x0000000060 /* relative to CSX_BASE, above */
+
+#define R_MC_CS0_ROW 0x0000000200
+#define R_MC_CS0_COL 0x0000000220
+#define R_MC_CS0_BA 0x0000000240
+#define R_MC_CS1_ROW 0x0000000260
+#define R_MC_CS1_COL 0x0000000280
+#define R_MC_CS1_BA 0x00000002A0
+#define R_MC_CS2_ROW 0x00000002C0
+#define R_MC_CS2_COL 0x00000002E0
+#define R_MC_CS2_BA 0x0000000300
+#define R_MC_CS3_ROW 0x0000000320
+#define R_MC_CS3_COL 0x0000000340
+#define R_MC_CS3_BA 0x0000000360
+#define R_MC_CS_ATTR 0x0000000380
+#define R_MC_TEST_DATA 0x0000000400
+#define R_MC_TEST_ECC 0x0000000420
+#define R_MC_MCLK_CFG 0x0000000500
+
+/* *********************************************************************
+ * L2 Cache Control Registers
+ ********************************************************************* */
+
+#define A_L2_READ_ADDRESS 0x0010040018
+#define A_L2_EEC_ADDRESS 0x0010040038
+#define A_L2_WAY_DISABLE 0x0010041000
+#define A_L2_MAKEDISABLE(x) (A_L2_WAY_DISABLE | (((~(x))&0x0F) << 8))
+#define A_L2_MGMT_TAG_BASE 0x00D0000000
+
+/* *********************************************************************
+ * PCI Interface Registers
+ ********************************************************************* */
+
+#define A_PCI_TYPE00_HEADER 0x00DE000000
+#define A_PCI_TYPE01_HEADER 0x00DE000800
+
+
+/* *********************************************************************
+ * Ethernet DMA and MACs
+ ********************************************************************* */
+
+#define A_MAC_BASE_0 0x0010064000
+#define A_MAC_BASE_1 0x0010065000
+#define A_MAC_BASE_2 0x0010066000
+
+#define MAC_SPACING 0x1000
+#define MAC_DMA_TXRX_SPACING 0x0400
+#define MAC_DMA_CHANNEL_SPACING 0x0100
+#define DMA_RX 0
+#define DMA_TX 1
+#define MAC_NUM_DMACHAN 2 /* channels per direction */
+
+#define MAC_NUM_PORTS 3
+
+#define A_MAC_CHANNEL_BASE(macnum) \
+ (A_MAC_BASE_0 + \
+ MAC_SPACING*(macnum))
+
+#define A_MAC_REGISTER(macnum,reg) \
+ (A_MAC_BASE_0 + \
+ MAC_SPACING*(macnum) + (reg))
+
+
+#define R_MAC_DMA_CHANNELS 0x800 /* Relative to A_MAC_CHANNEL_BASE */
+
+#define A_MAC_DMA_CHANNEL_BASE(macnum,txrx,chan) \
+ ((A_MAC_CHANNEL_BASE(macnum)) + \
+ R_MAC_DMA_CHANNELS + \
+ (MAC_DMA_TXRX_SPACING*(txrx)) + \
+ (MAC_DMA_CHANNEL_SPACING*(chan)))
+
+#define R_MAC_DMA_CHANNEL_BASE(txrx,chan) \
+ (R_MAC_DMA_CHANNELS + \
+ (MAC_DMA_TXRX_SPACING*(txrx)) + \
+ (MAC_DMA_CHANNEL_SPACING*(chan)))
+
+#define A_MAC_DMA_REGISTER(macnum,txrx,chan,reg) \
+ (A_MAC_DMA_CHANNEL_BASE(macnum,txrx,chan) + \
+ (reg))
+
+#define R_MAC_DMA_REGISTER(txrx,chan,reg) \
+ (R_MAC_DMA_CHANNEL_BASE(txrx,chan) + \
+ (reg))
+
+/*
+ * DMA channel registers, relative to A_MAC_DMA_CHANNEL_BASE
+ */
+
+#define R_MAC_DMA_CONFIG0 0x00000000
+#define R_MAC_DMA_CONFIG1 0x00000008
+#define R_MAC_DMA_DSCR_BASE 0x00000010
+#define R_MAC_DMA_DSCR_CNT 0x00000018
+#define R_MAC_DMA_CUR_DSCRA 0x00000020
+#define R_MAC_DMA_CUR_DSCRB 0x00000028
+#define R_MAC_DMA_CUR_DSCRADDR 0x00000030
+
+/*
+ * RMON Counters
+ */
+
+#define R_MAC_RMON_TX_BYTES 0x00000000
+#define R_MAC_RMON_COLLISIONS 0x00000008
+#define R_MAC_RMON_LATE_COL 0x00000010
+#define R_MAC_RMON_EX_COL 0x00000018
+#define R_MAC_RMON_FCS_ERROR 0x00000020
+#define R_MAC_RMON_TX_ABORT 0x00000028
+/* Counter #6 (0x30) now reserved */
+#define R_MAC_RMON_TX_BAD 0x00000038
+#define R_MAC_RMON_TX_GOOD 0x00000040
+#define R_MAC_RMON_TX_RUNT 0x00000048
+#define R_MAC_RMON_TX_OVERSIZE 0x00000050
+#define R_MAC_RMON_RX_BYTES 0x00000080
+#define R_MAC_RMON_RX_MCAST 0x00000088
+#define R_MAC_RMON_RX_BCAST 0x00000090
+#define R_MAC_RMON_RX_BAD 0x00000098
+#define R_MAC_RMON_RX_GOOD 0x000000A0
+#define R_MAC_RMON_RX_RUNT 0x000000A8
+#define R_MAC_RMON_RX_OVERSIZE 0x000000B0
+#define R_MAC_RMON_RX_FCS_ERROR 0x000000B8
+#define R_MAC_RMON_RX_LENGTH_ERROR 0x000000C0
+#define R_MAC_RMON_RX_CODE_ERROR 0x000000C8
+#define R_MAC_RMON_RX_ALIGN_ERROR 0x000000D0
+
+/* Updated to spec 0.2 */
+#define R_MAC_CFG 0x00000100
+#define R_MAC_THRSH_CFG 0x00000108
+#define R_MAC_VLANTAG 0x00000110
+#define R_MAC_FRAMECFG 0x00000118
+#define R_MAC_EOPCNT 0x00000120
+#define R_MAC_FIFO_PTRS 0x00000130
+#define R_MAC_ADFILTER_CFG 0x00000200
+#define R_MAC_ETHERNET_ADDR 0x00000208
+#define R_MAC_PKT_TYPE 0x00000210
+#define R_MAC_HASH_BASE 0x00000240
+#define R_MAC_ADDR_BASE 0x00000280
+#define R_MAC_CHLO0_BASE 0x00000300
+#define R_MAC_CHUP0_BASE 0x00000320
+#define R_MAC_ENABLE 0x00000400
+#define R_MAC_STATUS 0x00000408
+#define R_MAC_INT_MASK 0x00000410
+#define R_MAC_TXD_CTL 0x00000420
+#define R_MAC_MDIO 0x00000428
+#define R_MAC_DEBUG_STATUS 0x00000448
+
+#define MAC_HASH_COUNT 8
+#define MAC_ADDR_COUNT 8
+#define MAC_CHMAP_COUNT 4
+
+
+/* *********************************************************************
+ * DUART Registers
+ ********************************************************************* */
+
+
+#define R_DUART_NUM_PORTS 2
+
+#define A_DUART 0x0010060000
+
+#define A_DUART_REG(r)
+
+#define DUART_CHANREG_SPACING 0x100
+#define A_DUART_CHANREG(chan,reg) (A_DUART + DUART_CHANREG_SPACING*(chan) + (reg))
+#define R_DUART_CHANREG(chan,reg) (DUART_CHANREG_SPACING*(chan) + (reg))
+
+#define R_DUART_MODE_REG_1 0x100
+#define R_DUART_MODE_REG_2 0x110
+#define R_DUART_STATUS 0x120
+#define R_DUART_CLK_SEL 0x130
+#define R_DUART_CMD 0x150
+#define R_DUART_RX_HOLD 0x160
+#define R_DUART_TX_HOLD 0x170
+
+/*
+ * The IMR and ISR can't be addressed with A_DUART_CHANREG,
+ * so use this macro instead.
+ */
+
+#define R_DUART_AUX_CTRL 0x310
+#define R_DUART_ISR_A 0x320
+#define R_DUART_IMR_A 0x330
+#define R_DUART_ISR_B 0x340
+#define R_DUART_IMR_B 0x350
+#define R_DUART_OUT_PORT 0x360
+#define R_DUART_OPCR 0x370
+
+#define R_DUART_SET_OPR 0x3B0
+#define R_DUART_CLEAR_OPR 0x3C0
+
+#define DUART_IMRISR_SPACING 0x20
+
+#define R_DUART_IMRREG(chan) (R_DUART_IMR_A + (chan)*DUART_IMRISR_SPACING)
+#define R_DUART_ISRREG(chan) (R_DUART_ISR_A + (chan)*DUART_IMRISR_SPACING)
+
+#define A_DUART_IMRREG(chan) (A_DUART + R_DUART_IMRREG(chan))
+#define A_DUART_ISRREG(chan) (A_DUART + R_DUART_ISRREG(chan))
+
+/*
+ * These constants are the absolute addresses.
+ */
+
+#define A_DUART_MODE_REG_1_A 0x0010060100
+#define A_DUART_MODE_REG_2_A 0x0010060110
+#define A_DUART_STATUS_A 0x0010060120
+#define A_DUART_CLK_SEL_A 0x0010060130
+#define A_DUART_CMD_A 0x0010060150
+#define A_DUART_RX_HOLD_A 0x0010060160
+#define A_DUART_TX_HOLD_A 0x0010060170
+
+#define A_DUART_MODE_REG_1_B 0x0010060200
+#define A_DUART_MODE_REG_2_B 0x0010060210
+#define A_DUART_STATUS_B 0x0010060220
+#define A_DUART_CLK_SEL_B 0x0010060230
+#define A_DUART_CMD_B 0x0010060250
+#define A_DUART_RX_HOLD_B 0x0010060260
+#define A_DUART_TX_HOLD_B 0x0010060270
+
+#define A_DUART_INPORT_CHNG 0x0010060300
+#define A_DUART_AUX_CTRL 0x0010060310
+#define A_DUART_ISR_A 0x0010060320
+#define A_DUART_IMR_A 0x0010060330
+#define A_DUART_ISR_B 0x0010060340
+#define A_DUART_IMR_B 0x0010060350
+#define A_DUART_OUT_PORT 0x0010060360
+#define A_DUART_OPCR 0x0010060370
+#define A_DUART_IN_PORT 0x0010060380
+#define A_DUART_ISR 0x0010060390
+#define A_DUART_IMR 0x00100603A0
+#define A_DUART_SET_OPR 0x00100603B0
+#define A_DUART_CLEAR_OPR 0x00100603C0
+#define A_DUART_INPORT_CHNG_A 0x00100603D0
+#define A_DUART_INPORT_CHNG_B 0x00100603E0
+
+/* *********************************************************************
+ * Synchronous Serial Registers
+ ********************************************************************* */
+
+
+#define A_SER_BASE_0 0x0010060400
+#define A_SER_BASE_1 0x0010060800
+#define SER_SPACING 0x400
+
+#define SER_DMA_TXRX_SPACING 0x80
+
+#define SER_NUM_PORTS 2
+
+#define A_SER_CHANNEL_BASE(sernum) \
+ (A_SER_BASE_0 + \
+ SER_SPACING*(sernum))
+
+#define A_SER_REGISTER(sernum,reg) \
+ (A_SER_BASE_0 + \
+ SER_SPACING*(sernum) + (reg))
+
+
+#define R_SER_DMA_CHANNELS 0 /* Relative to A_SER_BASE_x */
+
+#define A_SER_DMA_CHANNEL_BASE(sernum,txrx) \
+ ((A_SER_CHANNEL_BASE(sernum)) + \
+ R_SER_DMA_CHANNELS + \
+ (SER_DMA_TXRX_SPACING*(txrx)))
+
+#define A_SER_DMA_REGISTER(sernum,txrx,reg) \
+ (A_SER_DMA_CHANNEL_BASE(sernum,txrx) + \
+ (reg))
+
+
+/*
+ * DMA channel registers, relative to A_SER_DMA_CHANNEL_BASE
+ */
+
+#define R_SER_DMA_CONFIG0 0x00000000
+#define R_SER_DMA_CONFIG1 0x00000008
+#define R_SER_DMA_DSCR_BASE 0x00000010
+#define R_SER_DMA_DSCR_CNT 0x00000018
+#define R_SER_DMA_CUR_DSCRA 0x00000020
+#define R_SER_DMA_CUR_DSCRB 0x00000028
+#define R_SER_DMA_CUR_DSCRADDR 0x00000030
+
+#define R_SER_DMA_CONFIG0_RX 0x00000000
+#define R_SER_DMA_CONFIG1_RX 0x00000008
+#define R_SER_DMA_DSCR_BASE_RX 0x00000010
+#define R_SER_DMA_DSCR_COUNT_RX 0x00000018
+#define R_SER_DMA_CUR_DSCR_A_RX 0x00000020
+#define R_SER_DMA_CUR_DSCR_B_RX 0x00000028
+#define R_SER_DMA_CUR_DSCR_ADDR_RX 0x00000030
+
+#define R_SER_DMA_CONFIG0_TX 0x00000080
+#define R_SER_DMA_CONFIG1_TX 0x00000088
+#define R_SER_DMA_DSCR_BASE_TX 0x00000090
+#define R_SER_DMA_DSCR_COUNT_TX 0x00000098
+#define R_SER_DMA_CUR_DSCR_A_TX 0x000000A0
+#define R_SER_DMA_CUR_DSCR_B_TX 0x000000A8
+#define R_SER_DMA_CUR_DSCR_ADDR_TX 0x000000B0
+
+#define R_SER_MODE 0x00000100
+#define R_SER_MINFRM_SZ 0x00000108
+#define R_SER_MAXFRM_SZ 0x00000110
+#define R_SER_ADDR 0x00000118
+#define R_SER_USR0_ADDR 0x00000120
+#define R_SER_USR1_ADDR 0x00000128
+#define R_SER_USR2_ADDR 0x00000130
+#define R_SER_USR3_ADDR 0x00000138
+#define R_SER_CMD 0x00000140
+#define R_SER_TX_RD_THRSH 0x00000160
+#define R_SER_TX_WR_THRSH 0x00000168
+#define R_SER_RX_RD_THRSH 0x00000170
+#define R_SER_LINE_MODE 0x00000178
+#define R_SER_DMA_ENABLE 0x00000180
+#define R_SER_INT_MASK 0x00000190
+#define R_SER_STATUS 0x00000188
+#define R_SER_STATUS_DEBUG 0x000001A8
+#define R_SER_RX_TABLE_BASE 0x00000200
+#define SER_RX_TABLE_COUNT 16
+#define R_SER_TX_TABLE_BASE 0x00000300
+#define SER_TX_TABLE_COUNT 16
+
+/* RMON Counters */
+#define R_SER_RMON_TX_BYTE_LO 0x000001C0
+#define R_SER_RMON_TX_BYTE_HI 0x000001C8
+#define R_SER_RMON_RX_BYTE_LO 0x000001D0
+#define R_SER_RMON_RX_BYTE_HI 0x000001D8
+#define R_SER_RMON_TX_UNDERRUN 0x000001E0
+#define R_SER_RMON_RX_OVERFLOW 0x000001E8
+#define R_SER_RMON_RX_ERRORS 0x000001F0
+#define R_SER_RMON_RX_BADADDR 0x000001F8
+
+/* *********************************************************************
+ * Generic Bus Registers
+ ********************************************************************* */
+
+#define IO_EXT_CFG_COUNT 8
+
+#define A_IO_EXT_BASE 0x0010061000
+#define A_IO_EXT_REG(r) (A_IO_EXT_BASE + (r))
+
+#define A_IO_EXT_CFG_BASE 0x0010061000
+#define A_IO_EXT_MULT_SIZE_BASE 0x0010061100
+#define A_IO_EXT_START_ADDR_BASE 0x0010061200
+#define A_IO_EXT_TIME_CFG0_BASE 0x0010061600
+#define A_IO_EXT_TIME_CFG1_BASE 0x0010061700
+
+#define IO_EXT_REGISTER_SPACING 8
+#define A_IO_EXT_CS_BASE(cs) (A_IO_EXT_CFG_BASE+IO_EXT_REGISTER_SPACING*(cs))
+#define R_IO_EXT_REG(reg,cs) ((cs)*IO_EXT_REGISTER_SPACING + (reg))
+
+#define R_IO_EXT_CFG 0x0000
+#define R_IO_EXT_MULT_SIZE 0x0100
+#define R_IO_EXT_START_ADDR 0x0200
+#define R_IO_EXT_TIME_CFG0 0x0600
+#define R_IO_EXT_TIME_CFG1 0x0700
+
+
+#define A_IO_INTERRUPT_STATUS 0x0010061A00
+#define A_IO_INTERRUPT_DATA0 0x0010061A10
+#define A_IO_INTERRUPT_DATA1 0x0010061A18
+#define A_IO_INTERRUPT_DATA2 0x0010061A20
+#define A_IO_INTERRUPT_DATA3 0x0010061A28
+#define A_IO_INTERRUPT_ADDR0 0x0010061A30
+#define A_IO_INTERRUPT_ADDR1 0x0010061A40
+#define A_IO_INTERRUPT_PARITY 0x0010061A50
+#define A_IO_PCMCIA_CFG 0x0010061A60
+#define A_IO_PCMCIA_STATUS 0x0010061A70
+#define A_IO_DRIVE_0 0x0010061300
+#define A_IO_DRIVE_1 0x0010061308
+#define A_IO_DRIVE_2 0x0010061310
+#define A_IO_DRIVE_3 0x0010061318
+
+#define R_IO_INTERRUPT_STATUS 0x0A00
+#define R_IO_INTERRUPT_DATA0 0x0A10
+#define R_IO_INTERRUPT_DATA1 0x0A18
+#define R_IO_INTERRUPT_DATA2 0x0A20
+#define R_IO_INTERRUPT_DATA3 0x0A28
+#define R_IO_INTERRUPT_ADDR0 0x0A30
+#define R_IO_INTERRUPT_ADDR1 0x0A40
+#define R_IO_INTERRUPT_PARITY 0x0A50
+#define R_IO_PCMCIA_CFG 0x0A60
+#define R_IO_PCMCIA_STATUS 0x0A70
+
+/* *********************************************************************
+ * GPIO Registers
+ ********************************************************************* */
+
+#define A_GPIO_CLR_EDGE 0x0010061A80
+#define A_GPIO_INT_TYPE 0x0010061A88
+#define A_GPIO_INPUT_INVERT 0x0010061A90
+#define A_GPIO_GLITCH 0x0010061A98
+#define A_GPIO_READ 0x0010061AA0
+#define A_GPIO_DIRECTION 0x0010061AA8
+#define A_GPIO_PIN_CLR 0x0010061AB0
+#define A_GPIO_PIN_SET 0x0010061AB8
+
+#define A_GPIO_BASE 0x0010061A80
+
+#define R_GPIO_CLR_EDGE 0x00
+#define R_GPIO_INT_TYPE 0x08
+#define R_GPIO_INPUT_INVERT 0x10
+#define R_GPIO_GLITCH 0x18
+#define R_GPIO_READ 0x20
+#define R_GPIO_DIRECTION 0x28
+#define R_GPIO_PIN_CLR 0x30
+#define R_GPIO_PIN_SET 0x38
+
+/* *********************************************************************
+ * SMBus Registers
+ ********************************************************************* */
+
+#define A_SMB_XTRA_0 0x0010060000
+#define A_SMB_XTRA_1 0x0010060008
+#define A_SMB_FREQ_0 0x0010060010
+#define A_SMB_FREQ_1 0x0010060018
+#define A_SMB_STATUS_0 0x0010060020
+#define A_SMB_STATUS_1 0x0010060028
+#define A_SMB_CMD_0 0x0010060030
+#define A_SMB_CMD_1 0x0010060038
+#define A_SMB_START_0 0x0010060040
+#define A_SMB_START_1 0x0010060048
+#define A_SMB_DATA_0 0x0010060050
+#define A_SMB_DATA_1 0x0010060058
+#define A_SMB_CONTROL_0 0x0010060060
+#define A_SMB_CONTROL_1 0x0010060068
+#define A_SMB_PEC_0 0x0010060070
+#define A_SMB_PEC_1 0x0010060078
+
+#define A_SMB_0 0x0010060000
+#define A_SMB_1 0x0010060008
+#define SMB_REGISTER_SPACING 0x8
+#define A_SMB_BASE(idx) (A_SMB_0+(idx)*SMB_REGISTER_SPACING)
+#define A_SMB_REGISTER(idx,reg) (A_SMB_BASE(idx)+(reg))
+
+#define R_SMB_XTRA 0x0000000000
+#define R_SMB_FREQ 0x0000000010
+#define R_SMB_STATUS 0x0000000020
+#define R_SMB_CMD 0x0000000030
+#define R_SMB_START 0x0000000040
+#define R_SMB_DATA 0x0000000050
+#define R_SMB_CONTROL 0x0000000060
+#define R_SMB_PEC 0x0000000070
+
+/* *********************************************************************
+ * Timer Registers
+ ********************************************************************* */
+
+/*
+ * Watchdog timers
+ */
+
+#define A_SCD_WDOG_0 0x0010020050
+#define A_SCD_WDOG_1 0x0010020150
+#define SCD_WDOG_SPACING 0x100
+#define SCD_NUM_WDOGS 2
+#define A_SCD_WDOG_BASE(w) (A_SCD_WDOG_0+SCD_WDOG_SPACING*(w))
+#define A_SCD_WDOG_REGISTER(w,r) (A_SCD_WDOG_BASE(w) + (r))
+
+#define R_SCD_WDOG_INIT 0x0000000000
+#define R_SCD_WDOG_CNT 0x0000000008
+#define R_SCD_WDOG_CFG 0x0000000010
+
+#define A_SCD_WDOG_INIT_0 0x0010020050
+#define A_SCD_WDOG_CNT_0 0x0010020058
+#define A_SCD_WDOG_CFG_0 0x0010020060
+
+#define A_SCD_WDOG_INIT_1 0x0010020150
+#define A_SCD_WDOG_CNT_1 0x0010020158
+#define A_SCD_WDOG_CFG_1 0x0010020160
+
+/*
+ * Generic timers
+ */
+
+#define A_SCD_TIMER_0 0x0010020070
+#define A_SCD_TIMER_1 0x0010020078
+#define A_SCD_TIMER_2 0x0010020170
+#define A_SCD_TIMER_3 0x0010020178
+#define SCD_NUM_TIMERS 4
+#define A_SCD_TIMER_BASE(w) (A_SCD_TIMER_0+0x08*((w)&1)+0x100*(((w)&2)>>1))
+#define A_SCD_TIMER_REGISTER(w,r) (A_SCD_TIMER_BASE(w) + (r))
+
+#define R_SCD_TIMER_INIT 0x0000000000
+#define R_SCD_TIMER_CNT 0x0000000010
+#define R_SCD_TIMER_CFG 0x0000000020
+
+#define A_SCD_TIMER_INIT_0 0x0010020070
+#define A_SCD_TIMER_CNT_0 0x0010020080
+#define A_SCD_TIMER_CFG_0 0x0010020090
+
+#define A_SCD_TIMER_INIT_1 0x0010020078
+#define A_SCD_TIMER_CNT_1 0x0010020088
+#define A_SCD_TIMER_CFG_1 0x0010020098
+
+#define A_SCD_TIMER_INIT_2 0x0010020170
+#define A_SCD_TIMER_CNT_2 0x0010020180
+#define A_SCD_TIMER_CFG_2 0x0010020190
+
+#define A_SCD_TIMER_INIT_3 0x0010020178
+#define A_SCD_TIMER_CNT_3 0x0010020188
+#define A_SCD_TIMER_CFG_3 0x0010020198
+
+/* *********************************************************************
+ * System Control Registers
+ ********************************************************************* */
+
+#define A_SCD_SYSTEM_REVISION 0x0010020000
+#define A_SCD_SYSTEM_CFG 0x0010020008
+
+#define A_SCD_SCRATCH 0x0010020C10 /* PASS2 */
+
+/* *********************************************************************
+ * System Address Trap Registers
+ ********************************************************************* */
+
+#define A_ADDR_TRAP_INDEX 0x00100200B0
+#define A_ADDR_TRAP_REG 0x00100200B8
+#define A_ADDR_TRAP_UP_0 0x0010020400
+#define A_ADDR_TRAP_UP_1 0x0010020408
+#define A_ADDR_TRAP_UP_2 0x0010020410
+#define A_ADDR_TRAP_UP_3 0x0010020418
+#define A_ADDR_TRAP_DOWN_0 0x0010020420
+#define A_ADDR_TRAP_DOWN_1 0x0010020428
+#define A_ADDR_TRAP_DOWN_2 0x0010020430
+#define A_ADDR_TRAP_DOWN_3 0x0010020438
+#define A_ADDR_TRAP_CFG_0 0x0010020440
+#define A_ADDR_TRAP_CFG_1 0x0010020448
+#define A_ADDR_TRAP_CFG_2 0x0010020450
+#define A_ADDR_TRAP_CFG_3 0x0010020458
+
+
+/* *********************************************************************
+ * System Interrupt Mapper Registers
+ ********************************************************************* */
+
+#define A_IMR_CPU0_BASE 0x0010020000
+#define A_IMR_CPU1_BASE 0x0010022000
+#define IMR_REGISTER_SPACING 0x2000
+
+#define A_IMR_MAPPER(cpu) (A_IMR_CPU0_BASE+(cpu)*IMR_REGISTER_SPACING)
+#define A_IMR_REGISTER(cpu,reg) (A_IMR_MAPPER(cpu)+(reg))
+
+#define R_IMR_INTERRUPT_DIAG 0x0010
+#define R_IMR_INTERRUPT_MASK 0x0028
+#define R_IMR_INTERRUPT_TRACE 0x0038
+#define R_IMR_INTERRUPT_SOURCE_STATUS 0x0040
+#define R_IMR_LDT_INTERRUPT_SET 0x0048
+#define R_IMR_LDT_INTERRUPT 0x0018
+#define R_IMR_LDT_INTERRUPT_CLR 0x0020
+#define R_IMR_MAILBOX_CPU 0x00c0
+#define R_IMR_ALIAS_MAILBOX_CPU 0x1000
+#define R_IMR_MAILBOX_SET_CPU 0x00C8
+#define R_IMR_ALIAS_MAILBOX_SET_CPU 0x1008
+#define R_IMR_MAILBOX_CLR_CPU 0x00D0
+#define R_IMR_INTERRUPT_STATUS_BASE 0x0100
+#define R_IMR_INTERRUPT_STATUS_COUNT 7
+#define R_IMR_INTERRUPT_MAP_BASE 0x0200
+#define R_IMR_INTERRUPT_MAP_COUNT 64
+
+/* *********************************************************************
+ * System Performance Counter Registers
+ ********************************************************************* */
+
+#define A_SCD_PERF_CNT_CFG 0x00100204C0
+#define A_SCD_PERF_CNT_0 0x00100204D0
+#define A_SCD_PERF_CNT_1 0x00100204D8
+#define A_SCD_PERF_CNT_2 0x00100204E0
+#define A_SCD_PERF_CNT_3 0x00100204E8
+
+/* *********************************************************************
+ * System Bus Watcher Registers
+ ********************************************************************* */
+
+#define A_SCD_BUS_ERR_STATUS 0x0010020880
+#define A_BUS_ERR_DATA_0 0x00100208A0
+#define A_BUS_ERR_DATA_1 0x00100208A8
+#define A_BUS_ERR_DATA_2 0x00100208B0
+#define A_BUS_ERR_DATA_3 0x00100208B8
+#define A_BUS_L2_ERRORS 0x00100208C0
+#define A_BUS_MEM_IO_ERRORS 0x00100208C8
+
+/* *********************************************************************
+ * System Debug Controller Registers
+ ********************************************************************* */
+
+#define A_SCD_JTAG_BASE 0x0010000000
+
+/* *********************************************************************
+ * System Trace Buffer Registers
+ ********************************************************************* */
+
+#define A_SCD_TRACE_CFG 0x0010020A00
+#define A_SCD_TRACE_READ 0x0010020A08
+#define A_SCD_TRACE_EVENT_0 0x0010020A20
+#define A_SCD_TRACE_EVENT_1 0x0010020A28
+#define A_SCD_TRACE_EVENT_2 0x0010020A30
+#define A_SCD_TRACE_EVENT_3 0x0010020A38
+#define A_SCD_TRACE_SEQUENCE_0 0x0010020A40
+#define A_SCD_TRACE_SEQUENCE_1 0x0010020A48
+#define A_SCD_TRACE_SEQUENCE_2 0x0010020A50
+#define A_SCD_TRACE_SEQUENCE_3 0x0010020A58
+#define A_SCD_TRACE_EVENT_4 0x0010020A60
+#define A_SCD_TRACE_EVENT_5 0x0010020A68
+#define A_SCD_TRACE_EVENT_6 0x0010020A70
+#define A_SCD_TRACE_EVENT_7 0x0010020A78
+#define A_SCD_TRACE_SEQUENCE_4 0x0010020A80
+#define A_SCD_TRACE_SEQUENCE_5 0x0010020A88
+#define A_SCD_TRACE_SEQUENCE_6 0x0010020A90
+#define A_SCD_TRACE_SEQUENCE_7 0x0010020A98
+
+/* *********************************************************************
+ * System Generic DMA Registers
+ ********************************************************************* */
+
+#define A_DM_0 0x0010020B00
+#define A_DM_1 0x0010020B20
+#define A_DM_2 0x0010020B40
+#define A_DM_3 0x0010020B60
+#define DM_REGISTER_SPACING 0x20
+#define DM_NUM_CHANNELS 4
+#define A_DM_BASE(idx) (A_DM_0 + ((idx) * DM_REGISTER_SPACING))
+#define A_DM_REGISTER(idx,reg) (A_DM_BASE(idx) + (reg))
+
+#define R_DM_DSCR_BASE 0x0000000000
+#define R_DM_DSCR_COUNT 0x0000000008
+#define R_DM_CUR_DSCR_ADDR 0x0000000010
+#define R_DM_DSCR_BASE_DEBUG 0x0000000018
+
+
+/* *********************************************************************
+ * Physical Address Map
+ ********************************************************************* */
+
+#define A_PHYS_MEMORY_0 _SB_MAKE64(0x0000000000)
+#define A_PHYS_MEMORY_SIZE _SB_MAKE64((256*1024*1024))
+#define A_PHYS_SYSTEM_CTL _SB_MAKE64(0x0010000000)
+#define A_PHYS_IO_SYSTEM _SB_MAKE64(0x0010060000)
+#define A_PHYS_GENBUS _SB_MAKE64(0x0010090000)
+#define A_PHYS_GENBUS_END _SB_MAKE64(0x0040000000)
+#define A_PHYS_LDTPCI_IO_MATCH_BYTES_32 _SB_MAKE64(0x0040000000)
+#define A_PHYS_LDTPCI_IO_MATCH_BITS_32 _SB_MAKE64(0x0060000000)
+#define A_PHYS_MEMORY_1 _SB_MAKE64(0x0080000000)
+#define A_PHYS_MEMORY_2 _SB_MAKE64(0x0090000000)
+#define A_PHYS_MEMORY_3 _SB_MAKE64(0x00C0000000)
+#define A_PHYS_L2_CACHE_TEST _SB_MAKE64(0x00D0000000)
+#define A_PHYS_LDT_SPECIAL_MATCH_BYTES _SB_MAKE64(0x00D8000000)
+#define A_PHYS_LDTPCI_IO_MATCH_BYTES _SB_MAKE64(0x00DC000000)
+#define A_PHYS_LDTPCI_CFG_MATCH_BYTES _SB_MAKE64(0x00DE000000)
+#define A_PHYS_LDT_SPECIAL_MATCH_BITS _SB_MAKE64(0x00F8000000)
+#define A_PHYS_LDTPCI_IO_MATCH_BITS _SB_MAKE64(0x00FC000000)
+#define A_PHYS_LDTPCI_CFG_MATCH_BITS _SB_MAKE64(0x00FE000000)
+#define A_PHYS_MEMORY_EXP _SB_MAKE64(0x0100000000)
+#define A_PHYS_MEMORY_EXP_SIZE _SB_MAKE64((508*1024*1024*1024))
+#define A_PHYS_LDT_EXP _SB_MAKE64(0x8000000000)
+#define A_PHYS_PCI_FULLACCESS_BYTES _SB_MAKE64(0xF000000000)
+#define A_PHYS_PCI_FULLACCESS_BITS _SB_MAKE64(0xF100000000)
+#define A_PHYS_RESERVED _SB_MAKE64(0xF200000000)
+#define A_PHYS_RESERVED_SPECIAL_LDT _SB_MAKE64(0xFD00000000)
+
+#define A_PHYS_L2CACHE_WAY_SIZE _SB_MAKE64(0x0000020000)
+#define PHYS_L2CACHE_NUM_WAYS 4
+#define A_PHYS_L2CACHE_TOTAL_SIZE _SB_MAKE64(0x0000080000)
+#define A_PHYS_L2CACHE_WAY0 _SB_MAKE64(0x00D0180000)
+#define A_PHYS_L2CACHE_WAY1 _SB_MAKE64(0x00D01A0000)
+#define A_PHYS_L2CACHE_WAY2 _SB_MAKE64(0x00D01C0000)
+#define A_PHYS_L2CACHE_WAY3 _SB_MAKE64(0x00D01E0000)
+
+
+#endif
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)