patch-2.4.19 linux-2.4.19/drivers/scsi/scsi_debug.c
Next file: linux-2.4.19/drivers/scsi/scsi_debug.h
Previous file: linux-2.4.19/drivers/scsi/scsi.h
Back to the patch index
Back to the overall index
- Lines: 1139
- Date:
Fri Aug 2 17:39:44 2002
- Orig file:
linux-2.4.18/drivers/scsi/scsi_debug.c
- Orig date:
Mon Feb 25 11:38:04 2002
diff -urN linux-2.4.18/drivers/scsi/scsi_debug.c linux-2.4.19/drivers/scsi/scsi_debug.c
@@ -14,7 +14,7 @@
*
* D. Gilbert (dpg) work for MOD device test [20010421]
* dpg, work for devfs large number of disks [20010809]
- * dpg, make more generic [20011123]
+ * dpg, use vmalloc() more inquiry+mode_sense [20020302]
*/
#include <linux/config.h>
@@ -31,6 +31,7 @@
#include <linux/init.h>
#include <linux/proc_fs.h>
#include <linux/smp_lock.h>
+#include <linux/vmalloc.h>
#include <asm/system.h>
#include <asm/io.h>
@@ -45,7 +46,7 @@
#include <linux/version.h>
#endif
-static char scsi_debug_version_str[] = "Version: 0.57 (20011209)";
+static char scsi_debug_version_str[] = "Version: 0.58 (20020302)";
#ifndef SCSI_CMD_READ_16
#define SCSI_CMD_READ_16 0x88
@@ -59,22 +60,26 @@
#define DEF_DEV_SIZE_MB 8
#define DEF_FAKE_BLK0 0
+#define DEF_OPTS 0
+#define SCSI_DEBUG_OPT_NOISE 1
+#define SCSI_DEBUG_OPT_MEDIUM_ERR 2
+
+#define OPT_MEDIUM_ERR_ADDR 0x1234
+
static int scsi_debug_num_devs = DEF_NR_FAKE_DEVS;
+static int scsi_debug_opts = DEF_OPTS;
#define NR_HOSTS_PRESENT (((scsi_debug_num_devs - 1) / 7) + 1)
#define N_HEAD 8
#define N_SECTOR 32
-#define DISK_READONLY(TGT) (0)
-#define DISK_REMOVEABLE(TGT) (0)
+#define DEV_READONLY(TGT) (0)
+#define DEV_REMOVEABLE(TGT) (0)
#define DEVICE_TYPE(TGT) (TYPE_DISK);
#define SCSI_DEBUG_MAILBOXES (scsi_debug_num_devs + 1)
static int scsi_debug_dev_size_mb = DEF_DEV_SIZE_MB;
#define STORE_SIZE (scsi_debug_dev_size_mb * 1024 * 1024)
-#define STORE_ELEM_ORDER 1
-#define STORE_ELEM_SIZE (PAGE_SIZE * (1 << STORE_ELEM_ORDER))
-#define STORE_ELEMENTS ((STORE_SIZE / STORE_ELEM_SIZE) + 1)
/* default sector size is 512 bytes, 2**9 bytes */
#define POW2_SECT_SIZE 9
@@ -82,8 +87,6 @@
#define N_CYLINDER (STORE_SIZE / (SECT_SIZE * N_SECTOR * N_HEAD))
-static int scsi_debug_fake_blk0 = DEF_FAKE_BLK0;
-
/* Do not attempt to use a timer to simulate a real disk with latency */
/* Only use this in the actual kernel, not in the simulator. */
#define IMMEDIATE
@@ -94,20 +97,14 @@
#define DISK_SPEED (HZ/10) /* 100ms */
#define CAPACITY (N_HEAD * N_SECTOR * N_CYLINDER)
#define SECT_SIZE_PER(TGT) SECT_SIZE
-#define SECT_PER_ELEM (STORE_ELEM_SIZE / SECT_SIZE)
static int starts[] =
{N_SECTOR,
N_HEAD * N_SECTOR, /* Single cylinder */
N_HEAD * N_SECTOR * 4,
0 /* CAPACITY */, 0};
-static int npart = 0;
-typedef struct scsi_debug_store_elem {
- unsigned char * p;
-} Sd_store_elem;
-
-static Sd_store_elem * store_arr = 0;
+static unsigned char * fake_storep;
typedef struct sdebug_dev_info {
Scsi_Device * sdp;
@@ -132,13 +129,18 @@
static volatile done_fct_t * do_done = 0;
-struct Scsi_Host * SHpnt = NULL;
+static struct Scsi_Host * SHpnt = NULL;
+static int scsi_debug_inquiry(unsigned char * cmd, int target,
+ unsigned char * buff, int bufflen,
+ Sdebug_dev_info * devip);
+static int scsi_debug_mode_sense(unsigned char * cmd, int target,
+ unsigned char * buff, int bufflen,
+ Sdebug_dev_info * devip);
static int scsi_debug_read(Scsi_Cmnd * SCpnt, int upper_blk, int block,
int num, int * errstsp, Sdebug_dev_info * devip);
static int scsi_debug_write(Scsi_Cmnd * SCpnt, int upper_blk, int block,
int num, int * errstsp, Sdebug_dev_info * devip);
-static void scsi_debug_send_self_command(struct Scsi_Host * shpnt);
static void scsi_debug_intr_handle(unsigned long);
static Sdebug_dev_info * devInfoReg(Scsi_Device * sdp);
static void mk_sense_buffer(Sdebug_dev_info * devip, int index, int key,
@@ -157,101 +159,11 @@
#define SENSE_BUFF_LEN 32
static char sense_buffers[NUM_SENSE_BUFFS][SENSE_BUFF_LEN];
-#ifdef SCSI_DUMP
-static void scsi_dump(Scsi_Cmnd * SCpnt, int flag)
-{
- int i;
- unsigned int *lpnt;
- struct scatterlist *sgpnt = NULL;
- printk("use_sg: %d", SCpnt->use_sg);
- if (SCpnt->use_sg) {
- sgpnt = (struct scatterlist *) SCpnt->buffer;
- for (i = 0; i < SCpnt->use_sg; i++) {
- lpnt = (int *) sgpnt[i].alt_address;
- printk(":%p %p %d\n", sgpnt[i].alt_address,
- sgpnt[i].address, sgpnt[i].length);
- if (lpnt)
- printk(" (Alt %x) ", lpnt[15]);
- }
- } else {
- printk("nosg: %p %p %d\n", SCpnt->request.buffer, SCpnt->buffer,
- SCpnt->bufflen);
- lpnt = (int *) SCpnt->request.buffer;
- if (lpnt)
- printk(" (Alt %x) ", lpnt[15]);
- }
- lpnt = (unsigned int *) SCpnt;
- for (i = 0; i < sizeof(Scsi_Cmnd) / 4 + 1; i++) {
- if ((i & 7) == 0)
- printk("\n");
- printk("%x ", *lpnt++);
- }
- printk("\n");
- if (flag == 0)
- return;
- lpnt = (unsigned int *) sgpnt[0].alt_address;
- for (i = 0; i < sizeof(Scsi_Cmnd) / 4 + 1; i++) {
- if ((i & 7) == 0)
- printk("\n");
- printk("%x ", *lpnt++);
- }
-#if 0
- printk("\n");
- lpnt = (unsigned int *) sgpnt[0].address;
- for (i = 0; i < sizeof(Scsi_Cmnd) / 4 + 1; i++) {
- if ((i & 7) == 0)
- printk("\n");
- printk("%x ", *lpnt++);
- }
- printk("\n");
-#endif
- printk("DMA free %d sectors.\n", scsi_dma_free_sectors);
-}
-#endif
-
-static int made_block0 = 0;
-
-static void scsi_debug_mkblock0(unsigned char * buff, int bufflen,
- Scsi_Cmnd * SCpnt)
-{
- int i;
- struct partition *p;
-
- memset(buff, 0, bufflen);
- *((unsigned short *) (buff + 510)) = 0xAA55;
- p = (struct partition *) (buff + 0x1be);
- i = 0;
- while (starts[i + 1]) {
- int start_cyl, end_cyl;
-
- start_cyl = starts[i] / N_HEAD / N_SECTOR;
- end_cyl = (starts[i + 1] - 1) / N_HEAD / N_SECTOR;
- p->boot_ind = 0;
-
- p->head = (i == 0 ? 1 : 0);
- p->sector = 1 | ((start_cyl >> 8) << 6);
- p->cyl = (start_cyl & 0xff);
-
- p->end_head = N_HEAD - 1;
- p->end_sector = N_SECTOR | ((end_cyl >> 8) << 6);
- p->end_cyl = (end_cyl & 0xff);
-
- p->start_sect = starts[i];
- p->nr_sects = starts[i + 1] - starts[i];
- p->sys_ind = 0x83; /* Linux ext2 partition */
- p++;
- i++;
- }
- if (!npart)
- npart = i;
- made_block0 = 1;
- i = (bufflen > STORE_ELEM_SIZE) ? STORE_ELEM_SIZE : bufflen;
- memcpy(store_arr[0].p, buff, i);
-}
+static
int scsi_debug_queuecommand(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
{
- unchar *cmd = (unchar *) SCpnt->cmnd;
+ unsigned char *cmd = (unsigned char *) SCpnt->cmnd;
int block;
int upper_blk;
unsigned char *buff;
@@ -263,17 +175,12 @@
Sdebug_dev_info * devip = NULL;
char * sbuff;
-#ifdef CONFIG_SMP
- /*
- * The io_request_lock *must* be held at this point.
- */
- if(! spin_is_locked(&io_request_lock))
- {
- printk("Warning - io_request_lock is not held in "
- "queuecommand\n");
- }
-#endif
-
+ if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts) {
+ printk(KERN_INFO "scsi_debug: queue_command: cmd ");
+ for (i = 0, num = SCpnt->cmd_len; i < num; ++i)
+ printk("%02x ", cmd[i]);
+ printk(" use_sg=%d\n", SCpnt->use_sg);
+ }
/*
* If we are being notified of the mid-level reposessing a command
* due to timeout, just return.
@@ -282,14 +189,23 @@
return 0;
}
- buff = (unsigned char *) SCpnt->request_buffer;
+ if (SCpnt->use_sg) { /* just use first element */
+ struct scatterlist *sgpnt = (struct scatterlist *)
+ SCpnt->request_buffer;
+
+ buff = sgpnt[0].address;
+ bufflen = sgpnt[0].length;
+ /* READ and WRITE process scatterlist themselves */
+ }
+ else
+ buff = (unsigned char *) SCpnt->request_buffer;
/*
* If a command comes for the ID of the host itself, just print
* a silly message and return.
*/
if(target == 7) {
- printk("How do you do!\n");
+ printk(KERN_WARNING "How do you do!\n");
SCpnt->result = 0;
done(SCpnt);
return 0;
@@ -303,7 +219,7 @@
#if 0
printk(KERN_INFO "sdebug:qc: host_no=%d, id=%d, sdp=%p, cmd=0x%x\n",
(int)SCpnt->device->host->host_no, (int)SCpnt->device->id,
- SCpnt->device, (int)(unsigned char)*cmd);
+ SCpnt->device, (int)*cmd);
#endif
if (NULL == SCpnt->device->hostdata) {
devip = devInfoReg(SCpnt->device);
@@ -317,6 +233,13 @@
devip = SCpnt->device->hostdata;
switch (*cmd) {
+ case INQUIRY: /* mandatory */
+ scsi_debug_errsts = scsi_debug_inquiry(cmd, target, buff,
+ bufflen, devip);
+ /* assume INQUIRY called first so setup max_cmd_len */
+ if (SCpnt->host->max_cmd_len != SCSI_DEBUG_MAX_CMD_LEN)
+ SCpnt->host->max_cmd_len = SCSI_DEBUG_MAX_CMD_LEN;
+ break;
case REQUEST_SENSE: /* mandatory */
SCSI_LOG_LLQUEUE(3, printk("Request sense...\n"));
if (devip) {
@@ -354,23 +277,6 @@
}
scsi_debug_errsts = 0;
break;
- case INQUIRY: /* mandatory */
- SCSI_LOG_LLQUEUE(3, printk("Inquiry...(%p %d)\n", buff, bufflen));
- memset(buff, 0, bufflen);
- buff[0] = DEVICE_TYPE(target);
- buff[1] = DISK_REMOVEABLE(target) ? 0x80 : 0;
- /* Removable disk */
- buff[2] = 2; /* claim SCSI 2 */
- buff[4] = 36 - 5;
- memcpy(&buff[8], "Linux ", 8);
- memcpy(&buff[16], "scsi_debug ", 16);
- memcpy(&buff[32], "0002", 4);
- scsi_debug_errsts = 0;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,10)
- if (SCpnt->host->max_cmd_len != SCSI_DEBUG_MAX_CMD_LEN)
- SCpnt->host->max_cmd_len = SCSI_DEBUG_MAX_CMD_LEN;
-#endif
- break;
case SEND_DIAGNOSTIC: /* mandatory */
SCSI_LOG_LLQUEUE(3, printk("Send Diagnostic\n"));
if (buff)
@@ -378,7 +284,8 @@
scsi_debug_errsts = 0;
break;
case TEST_UNIT_READY: /* mandatory */
- SCSI_LOG_LLQUEUE(3, printk("Test unit ready(%p %d)\n", buff, bufflen));
+ SCSI_LOG_LLQUEUE(3, printk("Test unit ready(%p %d)\n",
+ buff, bufflen));
if (buff)
memset(buff, 0, bufflen);
scsi_debug_errsts = 0;
@@ -484,19 +391,15 @@
(done) (SCpnt);
return 0;
case MODE_SENSE:
- /*
- * Used to detect write protected status.
- */
- scsi_debug_errsts = 0;
- memset(buff, 0, 6);
+ case MODE_SENSE_10:
+ scsi_debug_errsts =
+ scsi_debug_mode_sense(cmd, target, buff, bufflen, devip);
break;
default:
#if 0
- SCSI_LOG_LLQUEUE(3, printk("Unknown command %d\n", *cmd));
- SCpnt->result = DID_NO_CONNECT << 16;
- done(SCpnt);
- return 0;
-#else
+ printk(KERN_INFO "scsi_debug: Unsupported command, "
+ "opcode=0x%x\n", (int)cmd[0]);
+#endif
if (check_reset(SCpnt, devip)) {
done(SCpnt);
return 0;
@@ -505,7 +408,6 @@
(CHECK_CONDITION << 1);
mk_sense_buffer(devip, 2, ILLEGAL_REQUEST, 0x20, 0, 14);
break;
-#endif
}
spin_lock_irqsave(&mailbox_lock, iflags);
@@ -545,10 +447,11 @@
spin_unlock_irqrestore(&mailbox_lock, iflags);
add_timer(&timeout[i]);
if (!done)
- printk("scsi_debug_queuecommand: done can't be NULL\n");
+ printk(KERN_ERR "scsi_debug_queuecommand: "
+ "done can't be NULL\n");
#if 0
- printk("Sending command (%d %x %d %d)...", i, done,
+ printk(KERN_INFO "Sending command (%d %x %d %d)...", i, done,
timeout[i].expires, jiffies);
#endif
#endif
@@ -556,6 +459,14 @@
return 0;
}
+static int scsi_debug_ioctl(Scsi_Device *dev, int cmd, void *arg)
+{
+ if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts) {
+ printk(KERN_INFO "scsi_debug: ioctl: cmd=0x%x\n", cmd);
+ }
+ return -ENOTTY;
+}
+
static int check_reset(Scsi_Cmnd * SCpnt, Sdebug_dev_info * devip)
{
if (devip->reset) {
@@ -568,6 +479,190 @@
return 0;
}
+#define SDEBUG_MAX_INQ_SZ 58
+
+static int scsi_debug_inquiry(unsigned char * cmd, int target,
+ unsigned char * buff, int bufflen,
+ Sdebug_dev_info * devip)
+{
+ unsigned char pq_pdt;
+ unsigned char arr[SDEBUG_MAX_INQ_SZ];
+ int min_len = bufflen > SDEBUG_MAX_INQ_SZ ?
+ SDEBUG_MAX_INQ_SZ : bufflen;
+
+ SCSI_LOG_LLQUEUE(3, printk("Inquiry...(%p %d)\n", buff, bufflen));
+ if (bufflen < cmd[4])
+ printk(KERN_INFO "scsi_debug: inquiry: bufflen=%d "
+ "< alloc_length=%d\n", bufflen, (int)cmd[4]);
+ memset(buff, 0, bufflen);
+ memset(arr, 0, SDEBUG_MAX_INQ_SZ);
+ pq_pdt = DEVICE_TYPE(target);
+ arr[0] = pq_pdt;
+ if (0x2 & cmd[1]) { /* CMDDT bit set */
+ mk_sense_buffer(devip, 1, ILLEGAL_REQUEST, 0x24, 0, 14);
+ return (COMMAND_COMPLETE << 8) | (CHECK_CONDITION << 1);
+ }
+ else if (0x1 & cmd[1]) { /* EVPD bit set */
+ if (0 == cmd[2]) { /* supported vital product data pages */
+ arr[3] = 1;
+ arr[4] = 0x80; /* ... only unit serial number */
+ }
+ else if (0x80 == cmd[2]) { /* unit serial number */
+ arr[1] = 0x80;
+ arr[3] = 4;
+ arr[4] = '1'; arr[5] = '2'; arr[6] = '3';
+ arr[7] = '4';
+ }
+ else {
+ /* Illegal request, invalid field in cdb */
+ mk_sense_buffer(devip, 1, ILLEGAL_REQUEST, 0x24, 0, 14);
+ return (COMMAND_COMPLETE << 8) | (CHECK_CONDITION << 1);
+ }
+ memcpy(buff, arr, min_len);
+ return 0;
+ }
+ /* drops through here for a standard inquiry */
+ arr[1] = DEV_REMOVEABLE(target) ? 0x80 : 0; /* Removable disk */
+ arr[2] = 3; /* claim SCSI 3 */
+ arr[4] = SDEBUG_MAX_INQ_SZ - 5;
+ arr[7] = 0x3a; /* claim: WBUS16, SYNC, LINKED + CMDQUE */
+ memcpy(&arr[8], "Linux ", 8);
+ memcpy(&arr[16], "scsi_debug ", 16);
+ memcpy(&arr[32], "0003", 4);
+ memcpy(buff, arr, min_len);
+ return 0;
+}
+
+/* <<Following mode page info copied from ST318451LW>> */
+
+static int sdebug_err_recov_pg(unsigned char * p, int pcontrol, int target)
+{ /* Read-Write Error Recovery page for mode_sense */
+ unsigned char err_recov_pg[] = {0x1, 0xa, 0xc0, 11, 240, 0, 0, 0,
+ 5, 0, 0xff, 0xff};
+
+ memcpy(p, err_recov_pg, sizeof(err_recov_pg));
+ if (1 == pcontrol)
+ memset(p + 2, 0, sizeof(err_recov_pg) - 2);
+ return sizeof(err_recov_pg);
+}
+
+static int sdebug_disconnect_pg(unsigned char * p, int pcontrol, int target)
+{ /* Disconnect-Reconnect page for mode_sense */
+ unsigned char disconnect_pg[] = {0x2, 0xe, 128, 128, 0, 10, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0};
+
+ memcpy(p, disconnect_pg, sizeof(disconnect_pg));
+ if (1 == pcontrol)
+ memset(p + 2, 0, sizeof(disconnect_pg) - 2);
+ return sizeof(disconnect_pg);
+}
+
+static int sdebug_caching_pg(unsigned char * p, int pcontrol, int target)
+{ /* Caching page for mode_sense */
+ unsigned char caching_pg[] = {0x8, 18, 0x14, 0, 0xff, 0xff, 0, 0,
+ 0xff, 0xff, 0xff, 0xff, 0x80, 0x14, 0, 0, 0, 0, 0, 0};
+
+ memcpy(p, caching_pg, sizeof(caching_pg));
+ if (1 == pcontrol)
+ memset(p + 2, 0, sizeof(caching_pg) - 2);
+ return sizeof(caching_pg);
+}
+
+static int sdebug_ctrl_m_pg(unsigned char * p, int pcontrol, int target)
+{ /* Control mode page for mode_sense */
+ unsigned char ctrl_m_pg[] = {0xa, 10, 2, 0, 0, 0, 0, 0,
+ 0, 0, 0x2, 0x4b};
+
+ memcpy(p, ctrl_m_pg, sizeof(ctrl_m_pg));
+ if (1 == pcontrol)
+ memset(p + 2, 0, sizeof(ctrl_m_pg) - 2);
+ return sizeof(ctrl_m_pg);
+}
+
+
+#define SDEBUG_MAX_MSENSE_SZ 256
+
+static int scsi_debug_mode_sense(unsigned char * cmd, int target,
+ unsigned char * buff, int bufflen,
+ Sdebug_dev_info * devip)
+{
+ unsigned char dbd;
+ int pcontrol, pcode;
+ unsigned char dev_spec;
+ int alloc_len, msense_6, offset, len;
+ unsigned char * ap;
+ unsigned char arr[SDEBUG_MAX_MSENSE_SZ];
+ int min_len = bufflen > SDEBUG_MAX_MSENSE_SZ ?
+ SDEBUG_MAX_MSENSE_SZ : bufflen;
+
+ SCSI_LOG_LLQUEUE(3, printk("Mode sense ...(%p %d)\n", buff, bufflen));
+ dbd = cmd[1] & 0x8;
+ pcontrol = (cmd[2] & 0xc0) >> 6;
+ pcode = cmd[2] & 0x3f;
+ msense_6 = (MODE_SENSE == cmd[0]);
+ alloc_len = msense_6 ? cmd[4] : ((cmd[7] << 8) | cmd[6]);
+ /* printk(KERN_INFO "msense: dbd=%d pcontrol=%d pcode=%d "
+ "msense_6=%d alloc_len=%d\n", dbd, pcontrol, pcode, "
+ "msense_6, alloc_len); */
+ if (bufflen < alloc_len)
+ printk(KERN_INFO "scsi_debug: mode_sense: bufflen=%d "
+ "< alloc_length=%d\n", bufflen, alloc_len);
+ memset(buff, 0, bufflen);
+ memset(arr, 0, SDEBUG_MAX_MSENSE_SZ);
+ if (0x3 == pcontrol) { /* Saving values not supported */
+ mk_sense_buffer(devip, 1, ILLEGAL_REQUEST, 0x39, 0, 14);
+ return (COMMAND_COMPLETE << 8) | (CHECK_CONDITION << 1);
+ }
+ dev_spec = DEV_READONLY(target) ? 0x80 : 0x0;
+ if (msense_6) {
+ arr[2] = dev_spec;
+ offset = 4;
+ }
+ else {
+ arr[3] = dev_spec;
+ offset = 8;
+ }
+ ap = arr + offset;
+
+ switch (pcode) {
+ case 0x1: /* Read-Write error recovery page, direct access */
+ len = sdebug_err_recov_pg(ap, pcontrol, target);
+ offset += len;
+ break;
+ case 0x2: /* Disconnect-Reconnect page, all devices */
+ len = sdebug_disconnect_pg(ap, pcontrol, target);
+ offset += len;
+ break;
+ case 0x8: /* Caching page, direct access */
+ len = sdebug_caching_pg(ap, pcontrol, target);
+ offset += len;
+ break;
+ case 0xa: /* Control Mode page, all devices */
+ len = sdebug_ctrl_m_pg(ap, pcontrol, target);
+ offset += len;
+ break;
+ case 0x3f: /* Read all Mode pages */
+ len = sdebug_err_recov_pg(ap, pcontrol, target);
+ len += sdebug_disconnect_pg(ap + len, pcontrol, target);
+ len += sdebug_caching_pg(ap + len, pcontrol, target);
+ len += sdebug_ctrl_m_pg(ap + len, pcontrol, target);
+ offset += len;
+ break;
+ default:
+ mk_sense_buffer(devip, 1, ILLEGAL_REQUEST, 0x24, 0, 14);
+ return (COMMAND_COMPLETE << 8) | (CHECK_CONDITION << 1);
+ }
+ if (msense_6)
+ arr[0] = offset - 1;
+ else {
+ offset -= 2;
+ arr[0] = (offset >> 8) & 0xff;
+ arr[1] = offset & 0xff;
+ }
+ memcpy(buff, arr, min_len);
+ return 0;
+}
+
static int scsi_debug_read(Scsi_Cmnd * SCpnt, int upper_blk, int block,
int num, int * errstsp, Sdebug_dev_info * devip)
{
@@ -592,11 +687,19 @@
usleep(delay);
}
#endif
-
+ if ((SCSI_DEBUG_OPT_MEDIUM_ERR & scsi_debug_opts) &&
+ (block >= OPT_MEDIUM_ERR_ADDR) &&
+ (block < (OPT_MEDIUM_ERR_ADDR + num))) {
+ *errstsp = (COMMAND_COMPLETE << 8) |
+ (CHECK_CONDITION << 1);
+ mk_sense_buffer(devip, 1, MEDIUM_ERROR, 0x11, 0, 14);
+ /* claim unrecoverable read error */
+ return 1;
+ }
read_lock_irqsave(&sdebug_atomic_rw, iflags);
sgcount = 0;
nbytes = bufflen;
- /* printk("scsi_debug_read: block=%d, tot_bufflen=%d\n",
+ /* printk(KERN_INFO "scsi_debug_read: block=%d, tot_bufflen=%d\n",
block, bufflen); */
if (SCpnt->use_sg) {
sgcount = 0;
@@ -606,30 +709,7 @@
}
*errstsp = 0;
do {
- int resid, k, off, len, rem, blk;
- unsigned char * bp;
-
- /* If this is block 0, then we want to read the partition
- * table for this device. Let's make one up */
- if (scsi_debug_fake_blk0 && (block == 0) && (! made_block0)) {
- scsi_debug_mkblock0(buff, bufflen, SCpnt);
- *errstsp = 0;
- break;
- }
- bp = buff;
- blk = block;
- for (resid = bufflen; resid > 0; resid -= len) {
- k = blk / SECT_PER_ELEM;
- off = (blk % SECT_PER_ELEM) * SECT_SIZE;
- rem = STORE_ELEM_SIZE - off;
- len = (resid > rem) ? rem : resid;
-/* printk("sdr: blk=%d k=%d off=%d rem=%d resid"
- "=%d len=%d sgcount=%d\n", blk, k,
- off, rem, resid, len, sgcount); */
- memcpy(bp, store_arr[k].p + off, len);
- bp += len;
- blk += len / SECT_SIZE;
- }
+ memcpy(buff, fake_storep + (block * SECT_SIZE), bufflen);
#if 0
/* Simulate a disk change */
if (block == 0xfff0) {
@@ -655,7 +735,8 @@
}
}
else if (nbytes > 0)
- printk("sdebug_read: unexpected nbytes=%d\n", nbytes);
+ printk(KERN_WARNING "sdebug_read: unexpected "
+ "nbytes=%d\n", nbytes);
} while (nbytes);
read_unlock_irqrestore(&sdebug_atomic_rw, iflags);
return 0;
@@ -679,13 +760,6 @@
write_lock_irqsave(&sdebug_atomic_rw, iflags);
sgcount = 0;
-#ifdef SCSI_DUMP
- if (block != *((unsigned long *) (buff + 60))) {
- printk("%x %x :", block, *((unsigned long *) (buff + 60)));
- scsi_dump(SCpnt, 1);
- printk("Bad block written.\n");
- }
-#endif
nbytes = bufflen;
if (SCpnt->use_sg) {
sgcount = 0;
@@ -695,20 +769,7 @@
}
*errstsp = 0;
do {
- int resid, k, off, len, rem, blk;
- unsigned char * bp;
-
- bp = buff;
- blk = block;
- for (resid = bufflen; resid > 0; resid -= len) {
- k = blk / SECT_PER_ELEM;
- off = (blk % SECT_PER_ELEM) * SECT_SIZE;
- rem = STORE_ELEM_SIZE - off;
- len = (resid > rem) ? rem : resid;
- memcpy(store_arr[k].p + off, bp, len);
- bp += len;
- blk += len / SECT_SIZE;
- }
+ memcpy(fake_storep + (block * SECT_SIZE), buff, bufflen);
nbytes -= bufflen;
if (SCpnt->use_sg) {
@@ -720,52 +781,13 @@
}
}
else if (nbytes > 0)
- printk("sdebug_write: unexpected nbytes=%d\n", nbytes);
+ printk(KERN_WARNING "sdebug_write: "
+ "unexpected nbytes=%d\n", nbytes);
} while (nbytes);
write_unlock_irqrestore(&sdebug_atomic_rw, iflags);
return 0;
}
-static void scsi_debug_send_self_command(struct Scsi_Host * shpnt)
-{
- static unsigned char cmd[6] =
- {TEST_UNIT_READY, 0, 0, 0, 0, 0};
-
- Scsi_Request * scp;
- Scsi_Device * sdev;
-
- printk("Allocating host dev\n");
- sdev = scsi_get_host_dev(shpnt);
- if(sdev==NULL)
- {
- printk("Out of memory.\n");
- return;
- }
-
- printk("Got %p. Allocating command block\n", sdev);
- scp = scsi_allocate_request(sdev);
- printk("Got %p\n", scp);
-
- if(scp==NULL)
- {
- printk("Out of memory.\n");
- goto bail;
- }
-
- scp->sr_cmd_len = 6;
- scp->sr_use_sg = 0;
-
- printk("Sending command\n");
- scsi_wait_req (scp, (void *) cmd, (void *) NULL,
- 0, 100, 3);
-
- printk("Releasing command\n");
- scsi_release_request(scp);
-bail:
- printk("Freeing device\n");
- scsi_free_host_dev(sdev);
-}
-
/* A "high" level interrupt handler. This should be called once per jiffy
* to simulate a regular scsi disk. We use a timer to do this. */
@@ -784,18 +806,19 @@
SCint[indx] = NULL;
if (!my_done) {
- printk("scsi_debug_intr_handle: Unexpected interrupt\n");
+ printk(KERN_ERR "scsi_debug_intr_handle: Unexpected "
+ "interrupt\n");
return;
}
#if 0
- printk("In intr_handle...");
- printk("...done %d %x %d %d\n", i, my_done, to, jiffies);
- printk("In intr_handle: %d %x %x\n", i, SCtmp, my_done);
+ printk(KERN_INFO "In intr_handle...");
+ printk(KERN_INFO "...done %d %x %d %d\n", i, my_done, to, jiffies);
+ printk(KERN_INFO "In intr_handle: %d %x %x\n", i, SCtmp, my_done);
#endif
my_done(SCtmp);
#if 0
- printk("Called done.\n");
+ printk(KERN_INFO "Called done.\n");
#endif
}
@@ -803,39 +826,44 @@
static int do_init(void)
{
- int sz;
+ int sz = STORE_SIZE;
starts[3] = CAPACITY;
- sz = sizeof(Sd_store_elem) * STORE_ELEMENTS;
- store_arr = kmalloc(sz, GFP_ATOMIC);
- if (NULL == store_arr)
+ fake_storep = vmalloc(sz);
+ if (NULL == fake_storep)
return 1;
- memset(store_arr, 0, sz);
+ memset(fake_storep, 0, sz);
+
sz = sizeof(done_fct_t) * SCSI_DEBUG_MAILBOXES;
do_done = kmalloc(sz, GFP_ATOMIC);
- if (NULL == do_done) {
- kfree(store_arr);
- return 1;
- }
+ if (NULL == do_done)
+ goto out;
memset((void *)do_done, 0, sz);
+
sz = sizeof(struct timer_list) * SCSI_DEBUG_MAILBOXES;
timeout = kmalloc(sz, GFP_ATOMIC);
- if (NULL == timeout) {
- kfree((void *)do_done);
- kfree(store_arr);
- return 1;
- }
+ if (NULL == timeout)
+ goto out;
memset(timeout, 0, sz);
+
sz = sizeof(Scsi_Cmnd *) * SCSI_DEBUG_MAILBOXES;
SCint = kmalloc(sz, GFP_ATOMIC);
- if (NULL == SCint) {
- kfree(timeout);
- kfree((void *)do_done);
- kfree(store_arr);
- return 1;
- }
+ if (NULL == SCint)
+ goto out;
memset(SCint, 0, sz);
+
return 0;
+
+out:
+ if (fake_storep)
+ vfree(fake_storep);
+ if (do_done)
+ kfree((void *)do_done);
+ if (timeout)
+ kfree(timeout);
+ if (SCint)
+ kfree(SCint);
+ return 1;
}
static void do_end(void)
@@ -843,34 +871,31 @@
kfree(SCint);
kfree(timeout);
kfree((void *)do_done);
- kfree(store_arr);
+ vfree(fake_storep);
}
-int scsi_debug_detect(Scsi_Host_Template * tpnt)
+static int scsi_debug_detect(Scsi_Host_Template * tpnt)
{
- int k, num, sz;
+ int k, sz;
+ if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
+ printk(KERN_INFO "scsi_debug: detect\n");
if (0 == initialized) {
++initialized;
sz = sizeof(Sdebug_dev_info) * scsi_debug_num_devs;
devInfop = kmalloc(sz, GFP_ATOMIC);
if (NULL == devInfop) {
- printk("scsi_debug_detect: out of memory, 0.5\n");
+ printk(KERN_ERR "scsi_debug_detect: out of "
+ "memory, 0.5\n");
return 0;
}
memset(devInfop, 0, sz);
if (do_init()) {
- printk("scsi_debug_detect: out of memory, 0\n");
+ printk(KERN_ERR "scsi_debug_detect: out of memory"
+ ", 0\n");
return 0;
}
- for (k = 0; k < STORE_ELEMENTS; ++k) {
- store_arr[k].p = (unsigned char *)
- __get_free_pages(GFP_ATOMIC, STORE_ELEM_ORDER);
- if (0 == store_arr[k].p)
- goto detect_err;
- memset(store_arr[k].p, 0, STORE_ELEM_SIZE);
- }
for (k = 0; k < NUM_SENSE_BUFFS; ++k)
sense_buffers[k][0] = 0x70;
for (k = 0; k < NR_HOSTS_PRESENT; k++) {
@@ -880,43 +905,21 @@
return NR_HOSTS_PRESENT;
}
else {
- printk("scsi_debug_detect: called again\n");
+ printk(KERN_WARNING "scsi_debug_detect: called again\n");
return 0;
}
-
-detect_err:
- num = k;
- for (k = 0; k < STORE_ELEMENTS; ++k) {
- if (0 != store_arr[k].p) {
- free_pages((unsigned long)store_arr[k].p,
- STORE_ELEM_ORDER);
- store_arr[k].p = NULL;
- }
- }
- printk("scsi_debug_detect: out of memory: %d out of %d bytes\n",
- (int)(num * STORE_ELEM_SIZE),
- (int)(scsi_debug_dev_size_mb * 1024 * 1024));
- return 0;
}
static int num_releases = 0;
-int scsi_debug_release(struct Scsi_Host * hpnt)
+static int scsi_debug_release(struct Scsi_Host * hpnt)
{
- int k;
-
+ if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
+ printk(KERN_INFO "scsi_debug: release\n");
scsi_unregister(hpnt);
if (++num_releases != NR_HOSTS_PRESENT)
return 0;
-
- for (k = 0; k < STORE_ELEMENTS; ++k) {
- if (0 != store_arr[k].p) {
- free_pages((unsigned long)store_arr[k].p,
- STORE_ELEM_ORDER);
- store_arr[k].p = NULL;
- }
- }
do_end();
kfree(devInfop);
return 0;
@@ -966,8 +969,10 @@
sbuff[13] = asq;
}
-int scsi_debug_abort(Scsi_Cmnd * SCpnt)
+static int scsi_debug_abort(Scsi_Cmnd * SCpnt)
{
+ if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
+ printk(KERN_INFO "scsi_debug: abort\n");
#if 1
++num_aborts;
return SUCCESS;
@@ -991,8 +996,10 @@
#endif
}
-int scsi_debug_biosparam(Disk * disk, kdev_t dev, int *info)
+static int scsi_debug_biosparam(Disk * disk, kdev_t dev, int *info)
{
+ if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
+ printk(KERN_INFO "scsi_debug: biosparam\n");
/* int size = disk->capacity; */
info[0] = N_HEAD;
info[1] = N_SECTOR;
@@ -1002,36 +1009,13 @@
return 0;
}
-#if 0
-int scsi_debug_reset(Scsi_Cmnd * SCpnt, unsigned int why)
-{
- int i;
- unsigned long iflags;
-
- void (*my_done) (Scsi_Cmnd *);
- printk("Bus unlocked by reset - %d\n", why);
- scsi_debug_lockup = 0;
- for (i = 0; i < SCSI_DEBUG_MAILBOXES; i++) {
- if (SCint[i] == NULL)
- continue;
- SCint[i]->result = DID_RESET << 16;
- my_done = do_done[i];
- my_done(SCint[i]);
- spin_lock_irqsave(&mailbox_lock, iflags);
- SCint[i] = NULL;
- do_done[i] = NULL;
- timeout[i].function = NULL;
- spin_unlock_irqrestore(&mailbox_lock, iflags);
- }
- return SCSI_RESET_SUCCESS;
-}
-#endif
-
-int scsi_debug_device_reset(Scsi_Cmnd * SCpnt)
+static int scsi_debug_device_reset(Scsi_Cmnd * SCpnt)
{
Scsi_Device * sdp;
int k;
+ if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
+ printk(KERN_INFO "scsi_debug: device_reset\n");
++num_dev_resets;
if (SCpnt && ((sdp = SCpnt->device))) {
for (k = 0; k < scsi_debug_num_devs; ++k) {
@@ -1044,12 +1028,14 @@
return SUCCESS;
}
-int scsi_debug_bus_reset(Scsi_Cmnd * SCpnt)
+static int scsi_debug_bus_reset(Scsi_Cmnd * SCpnt)
{
Scsi_Device * sdp;
struct Scsi_Host * hp;
int k;
+ if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
+ printk(KERN_INFO "scsi_debug: bus_reset\n");
++num_bus_resets;
if (SCpnt && ((sdp = SCpnt->device)) && ((hp = sdp->host))) {
for (k = 0; k < scsi_debug_num_devs; ++k) {
@@ -1060,10 +1046,12 @@
return SUCCESS;
}
-int scsi_debug_host_reset(Scsi_Cmnd * SCpnt)
+static int scsi_debug_host_reset(Scsi_Cmnd * SCpnt)
{
int k;
+ if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
+ printk(KERN_INFO "scsi_debug: host_reset\n");
++num_host_resets;
for (k = 0; k < scsi_debug_num_devs; ++k)
devInfop[k].reset = 1;
@@ -1081,7 +1069,7 @@
scsi_debug_num_devs = tmp;
return 1;
} else {
- printk("scsi_debug_num_devs: usage scsi_debug_num_devs=<n> "
+ printk(KERN_INFO "scsi_debug_num_devs: usage scsi_debug_num_devs=<n> "
"(<n> can be from 1 to around 2000)\n");
return 0;
}
@@ -1098,13 +1086,32 @@
scsi_debug_dev_size_mb = tmp;
return 1;
} else {
- printk("scsi_debug_dev_size_mb: usage scsi_debug_dev_size_mb=<n>\n"
+ printk(KERN_INFO "scsi_debug_dev_size_mb: usage "
+ "scsi_debug_dev_size_mb=<n>\n"
" (<n> is number of MB ram shared by all devs\n");
return 0;
}
}
__setup("scsi_debug_dev_size_mb=", scsi_debug_dev_size_mb_setup);
+
+static int __init scsi_debug_opts_setup(char *str)
+{
+ int tmp;
+
+ if (get_option(&str, &tmp) == 1) {
+ if (tmp > 0)
+ scsi_debug_opts = tmp;
+ return 1;
+ } else {
+ printk(KERN_INFO "scsi_debug_opts: usage "
+ "scsi_debug_opts=<n>\n"
+ " (1->noise, 2->medium_error, 4->... (can be or-ed)\n");
+ return 0;
+ }
+}
+
+__setup("scsi_debug_opts=", scsi_debug_opts_setup);
#endif
MODULE_AUTHOR("Eric Youngdale + Douglas Gilbert");
@@ -1113,6 +1120,8 @@
MODULE_PARM_DESC(scsi_debug_num_devs, "number of SCSI devices to simulate");
MODULE_PARM(scsi_debug_dev_size_mb, "i");
MODULE_PARM_DESC(scsi_debug_dev_size_mb, "size in MB of ram shared by devs");
+MODULE_PARM(scsi_debug_opts, "i");
+MODULE_PARM_DESC(scsi_debug_opts, "1->noise, 2->medium_error, 4->...");
#ifdef MODULE_LICENSE
MODULE_LICENSE("GPL");
@@ -1123,8 +1132,9 @@
const char * scsi_debug_info(struct Scsi_Host * shp)
{
sprintf(sdebug_info, "scsi_debug, %s, num_devs=%d, "
- "dev_size_mb=%d\n", scsi_debug_version_str,
- scsi_debug_num_devs, scsi_debug_dev_size_mb);
+ "dev_size_mb=%d, opts=0x%x", scsi_debug_version_str,
+ scsi_debug_num_devs, scsi_debug_dev_size_mb,
+ scsi_debug_opts);
return sdebug_info;
}
@@ -1140,55 +1150,28 @@
orig_length = length;
if (inout == 1) {
- /* First check for the Signature */
- if (length >= 10 && strncmp(buffer, "scsi_debug", 10) == 0) {
- buffer += 11;
- length -= 11;
-
- if (buffer[length - 1] == '\n') {
- buffer[length - 1] = '\0';
- length--;
- }
- /*
- * OK, we are getting some kind of command. Figure out
- * what we are supposed to do here. Simulate bus lockups
- * to test our reset capability.
- */
- if (length == 4 && strncmp(buffer, "test", length) == 0) {
- printk("Testing send self command %p\n", SHpnt);
- scsi_debug_send_self_command(SHpnt);
- return orig_length;
- }
- if (length == 6 && strncmp(buffer, "lockup", length) == 0) {
- scsi_debug_lockup = 1;
- return orig_length;
- }
- if (length == 6 && strncmp(buffer, "unlock", length) == 0) {
- scsi_debug_lockup = 0;
- return orig_length;
- }
- printk("Unknown command:%s (%d)\n", buffer, length);
- } else
- printk("Wrong Signature:%10s\n", (char *) buffer);
-
- return -EINVAL;
+ char arr[16];
+ int minLen = length > 15 ? 15 : length;
+ if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
+ return -EACCES;
+ memcpy(arr, buffer, minLen);
+ arr[minLen] = '\0';
+ if (1 != sscanf(arr, "%d", &pos))
+ return -EINVAL;
+ scsi_debug_opts = pos;
+ return length;
}
begin = 0;
pos = len = sprintf(buffer, "scsi_debug adapter driver, %s\n"
- "num_devs=%d, shared (ram) size=%d MB, sector_size=%d bytes\n"
- "cylinders=%d, heads=%d, sectors=%d\n"
+ "num_devs=%d, shared (ram) size=%d MB, opts=0x%x\n"
+ "sector_size=%d bytes, cylinders=%d, heads=%d, sectors=%d\n"
"number of aborts=%d, device_reset=%d, bus_resets=%d, "
"host_resets=%d\n",
scsi_debug_version_str, scsi_debug_num_devs,
- scsi_debug_dev_size_mb, SECT_SIZE,
+ scsi_debug_dev_size_mb, scsi_debug_opts, SECT_SIZE,
N_CYLINDER, N_HEAD, N_SECTOR,
num_aborts, num_dev_resets, num_bus_resets, num_host_resets);
-#if 0
- "This driver is not a real scsi driver, but it plays one on TV.\n"
- "It is very handy for debugging specific problems because you\n"
- "can simulate a variety of error conditions\n");
-#endif
if (pos < offset) {
len = 0;
begin = pos;
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)