patch-2.4.19 linux-2.4.19/drivers/pcmcia/sa1100_pfs168.c

• Lines: 272
• Date: Fri Aug 2 17:39:44 2002
• Orig file: linux-2.4.18/drivers/pcmcia/sa1100_pfs168.c
• Orig date: Thu Oct 11 09:43:29 2001

diff -urN linux-2.4.18/drivers/pcmcia/sa1100_pfs168.c linux-2.4.19/drivers/pcmcia/sa1100_pfs168.c
@@ -11,117 +11,26 @@
 #include <asm/delay.h>
 #include <asm/hardware.h>
 #include <asm/irq.h>
-#include <asm/arch/pcmcia.h>
 
-static int pfs168_pcmcia_init(struct pcmcia_init *init){
-  int return_val=0;
+#include "sa1100_generic.h"
+#include "sa1111_generic.h"
 
+static int pfs168_pcmcia_init(struct pcmcia_init *init)
+{
   /* TPS2211 to standby mode: */
   PA_DWR &= ~(GPIO_GPIO0 | GPIO_GPIO1 | GPIO_GPIO2 | GPIO_GPIO3);
 
   /* Set GPIO_A<3:0> to be outputs for PCMCIA (socket 0) power controller: */
   PA_DDR &= ~(GPIO_GPIO0 | GPIO_GPIO1 | GPIO_GPIO2 | GPIO_GPIO3);
 
-  INTPOL1 |=
-    (1 << (S0_READY_NINT - SA1111_IRQ(32))) |
-    (1 << (S1_READY_NINT - SA1111_IRQ(32))) |
-    (1 << (S0_CD_VALID - SA1111_IRQ(32))) |
-    (1 << (S1_CD_VALID - SA1111_IRQ(32))) |
-    (1 << (S0_BVD1_STSCHG - SA1111_IRQ(32))) |
-    (1 << (S1_BVD1_STSCHG - SA1111_IRQ(32)));
-
-  return_val+=request_irq(S0_CD_VALID, init->handler, SA_INTERRUPT,
-			  "PFS168 PCMCIA (0) CD", NULL);
-  return_val+=request_irq(S1_CD_VALID, init->handler, SA_INTERRUPT,
-			  "PFS168 CF (1) CD", NULL);
-  return_val+=request_irq(S0_BVD1_STSCHG, init->handler, SA_INTERRUPT,
-			  "PFS168 PCMCIA (0) BVD1", NULL);
-  return_val+=request_irq(S1_BVD1_STSCHG, init->handler, SA_INTERRUPT,
-			  "PFS168 CF (1) BVD1", NULL);
-
-  return (return_val<0) ? -1 : 2;
-}
-
-static int pfs168_pcmcia_shutdown(void){
-
-  free_irq(S0_CD_VALID, NULL);
-  free_irq(S1_CD_VALID, NULL);
-  free_irq(S0_BVD1_STSCHG, NULL);
-  free_irq(S1_BVD1_STSCHG, NULL);
-
-  INTPOL1 &=
-    ~((1 << (S0_CD_VALID - SA1111_IRQ(32))) |
-      (1 << (S1_CD_VALID - SA1111_IRQ(32))) |
-      (1 << (S0_BVD1_STSCHG - SA1111_IRQ(32))) |
-      (1 << (S1_BVD1_STSCHG - SA1111_IRQ(32))));
-
-  return 0;
-}
-
-static int pfs168_pcmcia_socket_state(struct pcmcia_state_array
-					*state_array){
-  unsigned long status;
-  int return_val=1;
-
-  if(state_array->size<2) return -1;
-
-  memset(state_array->state, 0,
-	 (state_array->size)*sizeof(struct pcmcia_state));
-
-  status=PCSR;
-
-  state_array->state[0].detect=((status & PCSR_S0_DETECT)==0)?1:0;
-
-  state_array->state[0].ready=((status & PCSR_S0_READY)==0)?0:1;
-
-  state_array->state[0].bvd1=((status & PCSR_S0_BVD1)==0)?0:1;
-
-  state_array->state[0].bvd2=((status & PCSR_S0_BVD2)==0)?0:1;
-
-  state_array->state[0].wrprot=((status & PCSR_S0_WP)==0)?0:1;
-
-  state_array->state[0].vs_3v=((status & PCSR_S0_VS1)==0)?1:0;
-
-  state_array->state[0].vs_Xv=((status & PCSR_S0_VS2)==0)?1:0;
-
-  state_array->state[1].detect=((status & PCSR_S1_DETECT)==0)?1:0;
-
-  state_array->state[1].ready=((status & PCSR_S1_READY)==0)?0:1;
-
-  state_array->state[1].bvd1=((status & PCSR_S1_BVD1)==0)?0:1;
-
-  state_array->state[1].bvd2=((status & PCSR_S1_BVD2)==0)?0:1;
-
-  state_array->state[1].wrprot=((status & PCSR_S1_WP)==0)?0:1;
-
-  state_array->state[1].vs_3v=((status & PCSR_S1_VS1)==0)?1:0;
-
-  state_array->state[1].vs_Xv=((status & PCSR_S1_VS2)==0)?1:0;
-
-  return return_val;
-}
-
-static int pfs168_pcmcia_get_irq_info(struct pcmcia_irq_info *info){
-
-  switch(info->sock){
-  case 0:
-    info->irq=S0_READY_NINT;
-    break;
-
-  case 1:
-    info->irq=S1_READY_NINT;
-    break;
-
-  default:
-    return -1;
-  }
-
-  return 0;
+  return sa1111_pcmcia_init(init);
 }
 
-static int pfs168_pcmcia_configure_socket(const struct pcmcia_configure
-					    *configure){
-  unsigned long pccr=PCCR, gpio=PA_DWR;
+static int
+pfs168_pcmcia_configure_socket(const struct pcmcia_configure *conf)
+{
+  unsigned int pa_dwr_mask = 0, pa_dwr_set = 0;
+  int ret;
 
   /* PFS168 uses the Texas Instruments TPS2211 for PCMCIA (socket 0) voltage control only,
    * with the following connections:
@@ -135,103 +44,85 @@
    *
    */
 
-  switch(configure->sock){
+  switch (conf->sock) {
   case 0:
+    pa_dwr_mask = GPIO_GPIO0 | GPIO_GPIO1 | GPIO_GPIO2 | GPIO_GPIO3;
 
-    switch(configure->vcc){
-    case 0:
-      pccr = (pccr & ~PCCR_S0_FLT);
-      gpio &= ~(GPIO_GPIO0 | GPIO_GPIO1);
-      break;
-
-    case 33:
-      pccr = (pccr & ~PCCR_S0_PSE) | PCCR_S0_FLT | PCCR_S0_PWAITEN;
-      gpio = (gpio & ~(GPIO_GPIO0 | GPIO_GPIO1)) | GPIO_GPIO0;
-      break;
-
-    case 50:
-      pccr = (pccr | PCCR_S0_PSE | PCCR_S0_FLT | PCCR_S0_PWAITEN);
-      gpio = (gpio & ~(GPIO_GPIO0 | GPIO_GPIO1)) | GPIO_GPIO1;
-      break;
-
+    switch (conf->vcc) {
     default:
-      printk(KERN_ERR "%s(): unrecognized Vcc %u\n", __FUNCTION__,
-	     configure->vcc);
-      return -1;
+    case 0:	pa_dwr_set = 0;			break;
+    case 33:	pa_dwr_set = GPIO_GPIO0;	break;
+    case 50:	pa_dwr_set = GPIO_GPIO1;	break;
     }
 
-    switch(configure->vpp){
+    switch (conf->vpp) {
     case 0:
-      gpio &= ~(GPIO_GPIO2 | GPIO_GPIO3);
       break;
 
     case 120:
-      printk(KERN_ERR "%s(): PFS-168 does not support Vpp %uV\n", __FUNCTION__,
-	     configure->vpp/10);
+      printk(KERN_ERR "%s(): PFS-168 does not support VPP %uV\n",
+	     __FUNCTION__, conf->vpp / 10);
       return -1;
       break;
 
     default:
-      if(configure->vpp == configure->vcc)
-        gpio = (gpio & ~(GPIO_GPIO2 | GPIO_GPIO3)) | GPIO_GPIO3;
+      if (conf->vpp == conf->vcc)
+        pa_dwr_set |= GPIO_GPIO3;
       else {
-	printk(KERN_ERR "%s(): unrecognized Vpp %u\n", __FUNCTION__,
-	       configure->vpp);
+	printk(KERN_ERR "%s(): unrecognized VPP %u\n", __FUNCTION__,
+	       conf->vpp);
 	return -1;
       }
     }
-
-    pccr = (configure->reset)?(pccr | PCCR_S0_RST):(pccr & ~PCCR_S0_RST);
-
-    PA_DWR = gpio;
-
     break;
 
   case 1:
-    switch(configure->vcc){
-    case 0:
-      pccr = (pccr & ~PCCR_S1_FLT);
-      break;
+    pa_dwr_mask = 0;
+    pa_dwr_set = 0;
 
+    switch (conf->vcc) {
+    case 0:
     case 33:
-      pccr = (pccr & ~PCCR_S1_PSE) | PCCR_S1_FLT | PCCR_S1_PWAITEN;
       break;
 
     case 50:
-      printk(KERN_ERR "%s(): PFS-168 CompactFlash socket does not support Vcc %uV\n", __FUNCTION__,
-	     configure->vcc/10);
+      printk(KERN_ERR "%s(): PFS-168 CompactFlash socket does not support VCC %uV\n",
+	     __FUNCTION__, conf->vcc / 10);
       return -1;
-      break;
 
     default:
-      printk(KERN_ERR "%s(): unrecognized Vcc %u\n", __FUNCTION__,
-	     configure->vcc);
+      printk(KERN_ERR "%s(): unrecognized VCC %u\n", __FUNCTION__,
+	     conf->vcc);
       return -1;
     }
 
-    if(configure->vpp!=configure->vcc && configure->vpp!=0){
-      printk(KERN_ERR "%s(): CompactFlash socket does not support Vpp %uV\n", __FUNCTION__,
-	     configure->vpp/10);
+    if (conf->vpp != conf->vcc && conf->vpp != 0) {
+      printk(KERN_ERR "%s(): CompactFlash socket does not support VPP %uV\n"
+	      __FUNCTION__, conf->vpp/10);
       return -1;
     }
-
-    pccr = (configure->reset)?(pccr | PCCR_S1_RST):(pccr & ~PCCR_S1_RST);
-
     break;
-
-  default:
-    return -1;
   }
 
-  PCCR = pccr;
+  ret = sa1111_pcmcia_configure_socket(conf);
+  if (ret == 0) {
+    unsigned long flags;
+
+    local_irq_save(flags);
+    PA_DWR = (PA_DWR & ~pa_dwr_mask) | pa_dwr_set;
+    local_irq_restore(flags);
+  }
 
   return 0;
 }
 
 struct pcmcia_low_level pfs168_pcmcia_ops = {
-  pfs168_pcmcia_init,
-  pfs168_pcmcia_shutdown,
-  pfs168_pcmcia_socket_state,
-  pfs168_pcmcia_get_irq_info,
-  pfs168_pcmcia_configure_socket
+  init:			pfs168_pcmcia_init,
+  shutdown:		sa1111_pcmcia_shutdown,
+  socket_state:		sa1111_pcmcia_socket_state,
+  get_irq_info:		sa1111_pcmcia_get_irq_info,
+  configure_socket:	pfs168_pcmcia_configure_socket,
+
+  socket_init:		sa1111_pcmcia_socket_init,
+  socket_suspend:	sa1111_pcmcia_socket_suspend,
 };